Operating instructions

Signal words in accordance with ISO 3864 and ANSI Z 535
6 BEKOSPLIT® 11
Pos: 17 /- --- Seitenumbruch - --- @0\mod_1157028099015_ 0. docx @ 15320@ @ 1
Pos: 18 /Beko Technische Dok um entat ion/ Über schrift en/1/ Signa lwor te nach ISO 3864 und ANSI Z 535 @ 2\m od_1313660707004_1 5098.docx @ 24481 @ 1 @ 1
3 Signal words in accordance with ISO 3864 and ANSI Z 535
Pos: 19 /Beko Technische Dok um entat ion/ Sich er heit / Sign al worte ISO + ANSI @ 0\mod_1213340310421_150 98.docx @ 15214 @ @1
Danger!
Imminent hazard
Consequences of non-observance: serious injury or death
Warning!
Potential hazard
Consequences of non-observance: possible serious injury or death
Caution!
Imminent hazard
Consequences of non-observance: possible injury or property damage
Notice!
Potential hazard
Consequences of non-observance: possible injury or property damage
Important!
Additional advice, info, hints
Consequences of non-observance: disadvantages during operation and maintenance, no dan-
ger
Pos: 20 /Beko Technische Dok um entat ion/ Über schrift en/1/ All gemeineH in weise @ 0\m od_12266 583774 14_150 98.docx @ 15278@ 1 @ 1
4 General advice
Pos: 21 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Anleitung BE KO (weibl. Name) @ 3\ m od_1320757073499_15 098.docx @ 26177@ @ 1
Please check whether or not these instructions correspond to the device type.
Adhere to all advice given in these operating instructions. They include essential information
which must be observed during the installation, operation and maintenance. Therefore it is im-
perative for the service technician and the responsible operator / technical staff to read these
operating instructions prior to installation, start-up and maintenance.
The operating instructions must be accessible at any time at the place of application of the
BEKOSPLIT 11.
In addition to these operating instructions, local or national regulations must be complied with,
if necessary.
Make sure that the BEKOSPLIT 11 is operated only within the permissible limit values indi-
cated on the type plate. Any deviation involves a risk for persons and materials, and may result
in malfunction and service failures.
If you have any queries regarding these installation- and operating instructions, please contact
BEKO TECHNOLOGIES CORP.
Pos: 22 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Allgemein bl au @ 2\m od_1312966250115_1 5098.docx @ 23122@ @ 1
For safe operation, the plant must only be operated and maintained in accordance with the in-
dications in these operating instructions. In addition, the national and operational statutory pro-
visions and safety regulations, as well as the accident prevention regulations required for the
respective case of application, need to be observed during the employment. This applies ac-
cordingly when accessories are used.
Non-observance of the installation and operating instructions involves risks for persons, sys-
tems, and the environment.
As regards the electrical installation, observe all regulations in force (e.g.
VDE 0100 / IEC 60364).
Electrical works must only be carried out by authorized and skilled personnel!
Pos: 23 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Funktionsprüfung B EKOSP LIT blau @ 2\ m od_13129665 23621_1 5098.docx @ 23155 @ @ 1
System performance tests, installation, setting and maintenance measures must only be car-
ried out by authorized and skilled personnel. Only instructed personnel are authorized to carry
out settings during the operation.
The dosage setting of the BEKOSPLIT
®
11 must, as a matter of principle, only be implemented
by authorized and skilled personnel.
Use original BEKO TECHNOLOGIES reaction splitting agents and filters only! (Not included in
the scope of delivery).
Check the outflowing cleaned water once a week by means of a reference turbidity!
Pos: 24 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s KeineFrem d-Fl üssigk eit blau@ 2\m od_1312966 669452 _15098. docx @ 23188 @ @ 1