Range Hood User Manual BRH60CX EN BRH90CX
Please read this manual first! Dear Customers! Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well.
1 Important safety and environmental instructions This section contains safety • If the power cable is faulty, instructions that will help protect it should be replaced by a from risk of personal injury or qualified person certified by property damage. Failure to follow the manufacturer, after-sales these instructions invalidates the service or similar (preferably an granted warranty. electrician) or a person described by the importer. 1.
1 Important safety and environmental instructions • If the supply cord is damaged, it • Avoid large flames beneath the m u s t b e r e p l a c e d b y t h e product. Otherwise, particles on manufacturer or its service agent oil filter may ignite and lead to a or a similarly qualified person in fire. order to avoid a hazard. • Turn on the hobs after placing pans or pots on it. Otherwise, 1.1.2 Product safety rising heat may deform certain • You can use a pipe with a diameter parts of your product.
1 Important safety and environmental instructions • Operate your hood for 15 minutes more after the end of cooking or frying in order to remove the smell and cooking vapor in the kitchen. • When the hood is in use, especially together with gas cookers or other fuels, make sure that environment is ventilated with clean air. • Pay attention not to connect the appliance to the flues used by non-electrical devices. (E.g.: Heater flue).
1 Important safety and environmental instructions 1.1.3 Children's safety • The manufacturer shall not be • Packaging materials are dangerous liable for any damage caused by improper use or handling. to children. Keep packaging materials in a safe place out of reach of children. • Electrical appliances are dangerous to children. Keep children away from the product. Do not allow children play with the appliance.
1 Important safety and environmental instructions • WARNING: Failure to fix the screws in concordance with the instructions provided in the manual may lead to electrical hazards. 1.3 Compliance with WEEE Directive and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
2 Technical specifications of your appliance BRH60CX BRH90CX Width 600 mm 900 mm Depth 500 mm 500 mm Height Min. 710 - Max. 1150 mm Min. 710 - Max. 1150 mm Supply Voltage 220-240V~50 Hz 220-240V~50 Hz Control Electronic Tact Switch with Speed Display Electronic Tact Switch with Speed Display Suction power 700 m 3/h 700 m 3/h Motor power 240 W 240 W Lamp power 2x2W 2x2W Total power 244 W 244 W Net weight 14.4 kg 16.3 kg Gross weight 17.6 kg 20.5 kg Fig.
2 Technical specifications of your appliance Fig.
3 Operating your appliance The hood is designed for suction of fumes while preparing meals. The device can be operated in two modes: As extractor: vapors are removed outside the room by means of a venting pipe. The venting pipe is not available with the device and must be purchased separately. A A A A Use the shortest vapor discharging pipe possible. The venting pipe shall have the smoothest inner surface as possible (it is not recommended to use pipes of type spiro).
4 Installing your appliance A T he ex ha us t a ir mu st not be discharged into a flue which is used for exhausting fumes from other appliances burning gas or other fuels. Regulations concerning the discharge of air have to be fulfilled. • Use a rigid PVC pipe with a min. Ø l20 mm to evacuate fumes outside. • The above restrictions do not apply to hoods with no fumes outlet to outside (recirculation system with activated charcoal filter). • Install the hood in line with the instructions on the template .
4 Installing your appliance Before installation, the following must be done: • Check that the dimensions of the purchased product are adapted to the selected target spot. • Disconnect and remove (if possible) the furniture located in the installation area of the hood to get easy access to the ceiling or wall to which the hood is to be fitted. If this is not possible, the elements located near the working area must be secured.
4 Installing your appliance [Ø6 x 30mm] x4 Hood / User Manual [4 x 32mm] x4 13 / EN
4 Installing your appliance [4 x 12mm] x2 [Ø6 x 30mm] x4 14 / EN [4 x 32mm] x4 Hood / User Manual
4 Installing your appliance [4 x 12mm] x2 Hood / User Manual 15 / EN
4 Installing your appliance 4.2 Electric connection The mains voltage must correspond to the voltage indicated on the rating plate affixed to the inside of the hood. If the kitchen hood is equipped with a plug, it should be put in a socket connector that meets the requirements of binding regulations and is located in an easily accessible place. If the hood is not fitted with a plug, the installation of the hood should be entrusted to someone with appropriate permissions (e.g. electrician).
5 Cleaning and maintenance Before carrying out any maintenance operations 5.3 Activated Charcoal Filter on the appliance, remove the plug from the wall outlet. The hood should be cleaned with Replace the charcoal filter every 3 months. mild cleaning agents, do not use abrasives. Increase the filter cleaning/ Regular maintenance significantly improves the replacement frequency if the hood performance and durability of the hood.
6 Control of hood operation 6.1 Control of the hood 6.2 Methods of reducing the effect of cooking process on The different control panels are described below. Check the panel model installed on the environment your hood and see the figure indicated in each case. Four-speed panel - Digital display 1 - Lighting on and off. 2 - Extractor fan on and off. 3 - Decrease extractor fan speed. 4 - Extractor fan speed display panel. 5 - Increase extractor fan speed. 6 - Enable extractor fan turbo speed.
7 Solving problems Symptoms Cause Repairing method No symbol is shown on the display, the The touch control is probably hood does not respond to pressing the suspended. control fields. Disconnect the hood from the power supply for about 15 sec. and switch it on again. The hood has very poor vapor suction. Probably cause is dirty filters. The grease filter must be cleaned in the dishwasher or replace with a new one. The carbon filter (if present) must be replaced with a new one.
8 Legal Information 8.1 The Manufacturer • Is not responsible for any failure to observe the instructions given in this manual and current safety regulations for the correct use of the equipment. • Reserves the right to make any modications to the equipment or this manual without prior notice. Contact our ocial distributor should you require technical assistance or additional information on our products. www.beko.
