User Manual

Owner’s Guide & Installation Instructions
53 / English
Preparation
Your machine will end the programme when you turn the Programme
Selection knob; however, it does not drain the water inside. When you
select and start a new programme.
C
CAUTION
• Depending on the step where the programme was canceled
in, you may have to put detergent and softener again for the
programme you have selected anew.
• If you want to open the loading door after you have cancelled the
program but it is not possible to open the loading door since the
water level in the product is above the loading door opening, turn
the Program Selection knob to the Pump+Spin program and
discharge the water in the product.
Re-spinning the laundry
If you want to re-spin the clothes:
1. Rearrange the previously placed clothes in the drum.
2. Select the spin program.
3. Adjust the spin speed.
End of program
“End” warning appears on the display when the program is
completed.
If you do not press any button for 10 minutes, The display and the
program follower indicators will turn off.