English (United States)

24 / English
Front-Loading Automatic Washer
Installation Instructions
Installation Checklist
• Water inlet hoses and accessory bags must be removed from the
wash drum.
• Transportation/shipping bolts must be removed.
• Washer must be properly leveled by using the adjustable feet.
• Water inlet hoses are connected to the water faucets, secured and
checked for any leaks by turning on both faucets.
• Drain installation is done properly and drain hose is checked and
secured to prevent any flooding.
• Washer is connected to a properly grounded live wall power outlet.
• Be sure that power outlet, water faucets and drain outlet must be
always accessible to the user.
Transportation
Before you transport the washer, you should carry out the following:
1.Turn off both water faucets.
2.Before you disconnect the water inlet hoses, decrease the pressure
inside hoses by turning on the washer choosing any wash program.
As soon as the Start/Pause/Cancel led starts blinking, turn off the
appliance. You may securely disconnect inlet hoses without any
water gush.
3.Disconnect the drain hose and hang it on the back plate by inserting
into the holder plastic brackets.
4.Unplug the power cord and hang it on the back plate by inserting
into the holder plastic brackets.
5.Remove bolt hole covers and reinstall shipping bolts to their places.
You can apply the procedure in chapter “Removing shipping bolts”
in reverse to accomplish this.
6.Be sure that rubber bushes are properly located in holes and bolts
are screwed back tightly for secure transportation of the appliance.