Owner Manual

52 / English
Front-Loading Automatic Washer
Preparation
Adding or taking out laundry
This is only possible under the following conditions:
During time delay,
C
CAUTION
Washer allows adding more laundry during a future step only if
the water level is low enough to open the loading door or if the
temperature in the washer is low
1. Press the Start / Pause button to switch the product to pause
mode. The programme follow-up light of the relevant step during
which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened if the water level is low
enough.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed
settings if necessary.
6. Press the Start / Pause button to then restart the product.
Cancelling the program
To cancel the programme, turn the Programme Selection knob to
select another programme. Previous programme will be cancelled.
End / Cancel light will flash continuously to notify that the programme
has been canceled.