Owner Manual

64 / English
Front-Loading Automatic Washer
Troubleshooting
Problem Reason Solution
Washing takes
longer than
specified in the
manual.(*)
Water pressure is low. * Product waits until taking
in an adequate amount
of water to prevent poor
washing quality due to the
decreased amount of water.
Therefore, the washing time
extends.
Supply voltage might be low. * Washing time is prolonged to
avoid poor washing results
when the supply voltage is
low.
Input temperature of the water
might be low.
* Required time to heat up
the water extends in cold
seasons. Also, washing time
can be lengthened to avoid
poor washing results.
Number of rinse cycles and/
or amount of rinse water might
have increased.
* Product increases the
amount of rinse water when
good rinsing is needed and
adds an extra rinsing step if
necessary.
Excessive foam might have
occurred and the automatic
foam absorption system might
have been activated due to too
much detergent.
* Use the recommended
amount of detergent.
There may be an imbalance of
load in the drum.
* The automatic spin
correction system might have
been activated due to the
unbalanced distribution of
the laundry in the drum.