Front-Loading Automatic Washer Owner’s Guide & Installation Instructions To prevent accidents and machine damage, read these instructions before installation or use. Use the washer only as instructed in this owner’s guide and installation instructions included with your washer. Keep this guide for future reference As an ENERGY STAR® partner, BEKO has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. BWM7200X EN Document Number= 2820526917_EN/23-01-19.
Please read this guide first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this document carefully before using your product and keep it for future reference. This guide will… …help you use your washer in a fast and safe way. • Please read the guide before installing and starting your washer.
Explanation of symbols Throughout this guide the following symbols are used: C CAUTION A WARNING B WARNING • Important information or useful hints about usage. • Warning for hazardous situations with regard to life and property. • Warning for electrical shock Please contact your authorized Beko dealer or visit www.beko.us to locate and get information for the closest authorized Beko service center Please fill in the information below for future reference. Model no.: Serial no.
TABLE OF CONTENTS 1 Your Washer 6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Important Safety Instructions 8 3 Installation Instructions 13 The Right Location of Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installation Clearances . . . . . . . . . . . . . .
TABLE OF CONTENTS 5 Selecting a Program and Operating Your Washer 36 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Program selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Program and consumption table . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Your Washer Overview 1 2 8 3 4 5 6 7 1- Power cable 2- Top panel 3- Control panel 4- Drain hose 5- Loading door 6- Filter cap 7- Adjustable feet 8- Detergent drawer 6 / English Front-Loading Automatic Washer
Your Washer Specifications Front Loading Automatic Washer Models BWM7200X Height (in) / (cm) 33.1 / 84 Width (in) / (cm) 23.6 / 60 Depth (in) / (cm) 23.22 / 59 Net Weight (lbs) / (kg) 149.91 / 68 Electricity (V/Hz.) 120 / 60 Total Current (A) 10 Total Power (W) 1100 Water pressure (psi) / (bar) (15-145) / (1-10) Drain height (ft.) / (m.) 4.9 / 1.5 Wash capacity (cu. Ft.) 1.94 Dry Load Capacity (lbs)/(kg) 15.
2 Important Safety Instructions B WARNING • To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: • Read all instructions before using the washer.
Important Safety Instructions • Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out. • This appliance must only be used for the purpose of washing, rinsing and spinning machine-washable items using laundry additives that are suitable for use in washers .
Important Safety Instructions • Store laundry detergents and additives in a cool, dry place out of children’s reach due to danger of chemical poisoning and skin irritation. Follow the manufacturers’ instructions when using laundry products. • Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in following cycles and may lead to skin irritation. • Do not wash items stained with vegetable oil, cooking oil or petroleum.
Important Safety Instructions • Make sure that shipping bolts are removed before you operate the washer. If service is required as a result of not removing the bolts, it will not be covered by the warranty. • Make sure that the wash drum is empty before you load the washer. • Do not store and use any flammable and combustible substances such as lint, paper and chemicals near the appliance. • Always follow the manufacturer’s instructions when you are using a descaling agent.
Important Safety Instructions • Do not use fabric softeners or products to reduce static unless recommended by the manufacturers of the fabric softener product. • Check the drain pump filter occasionally to remove coins, buttons and such small objects. • Always drain off the water completely before cleaning the pump filter, before transporting the washer, when there is a danger of frost and when there is a power failure (For emergency draining, See User maintenance instructions).
3 Installation Instructions Read this first ! This washer can be individually installed in free-standing and built-in installations. You can also install your washer with your dryer as a free-standing or built-in pair. Before you install your appliance, read the following instructions completely and carefully: • Save these instructions for future reference.
Installation Instructions • It is not recommended to install and operate the washer on a wooden floor or soft floor. If you have to install your washer on a wooden or frame construction floor, the floor must be reinforced properly and the washer must be located in the corner of the room if possible. • Never place your washer on a carpet. This prevents air circulation. The electrical components of the machine may overheat and cause damage. • Do not stand appliance on the power cable.
Installation Instructions Allowable Clearances for Undercounter Installation The dimensions are for the recommended spacing. Counter depth should be 23.5-24.5”(60-62 cm). Custom undercounter installation – Washer only Minimum counter width should be 50” (127 cm) for a pair of Beko washer & dryer.
Installation Instructions Allowable Clearances for Closet Installation When installed in closet (washer only/washer dryer stacked) : Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm) Closet door ventilation requirement: A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) from the bottom of closet door. Stacked Installation You can stack your Beko washer and dryer by using a special stacking kit.
Installation Instructions Removing shipping bolts B WARNING • Shipping bolts must be removed before operating the washer! Otherwise, the appliance will be damaged seriously! 1.Loosen all the bolts with a spanner wrench until they rotate freely. 2.Remove the shipping bolts by turning them gently. 3.Bolt hole covers (supplied in the bag with the owner’s guide) are fitted into the holes on the rear panel with a special lock mechanism.
Installation Instructions Leveling the washer B WARNING • Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1.Manually (by hand) loosen the lock nuts on the feet. 2.Adjust them until the washer stands level and firmly. 3.Important: Tighten all lock nuts up again. Electrical Connection Grounding Instructions This appliance must be grounded.
Installation Instructions B WARNING • Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. • Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. • Be sure that the power cord is always accessible by the user after the appliance is installed.
Installation Instructions Power supply and circuit Connect the clothes washer to an earthed outlet protected by a fuse of suitable capacity. Important: • Wall power connection should comply with national regulations. • The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a Groud Fault Circuit Interrupter (GFCI) is recommended. • The voltage and maximum total current are specified in the section “Specifications”.
Installation Instructions Water Supply Connection Your washer comes with both cold and hot water connections. Connect the blue marked cold water supply hose to the cold water inlet valve/faucet and the red marked hot water intake hose to the hot water inlet valve/faucet. Screw the connecting bolts by hand and tighten the connection properly using a plier. Over tightening may cause damage on bolted connection.
Installation Instructions The water pressure must be between 15-145 psi (1-10 bar) for the proper operation of this washer. 1 bar corresponds to more than 2.1 gallons (8 liters) per minute flow rate with a fully open faucet. Water inlet hoses and valves should withstand a water pressure of 145 psi (10 bar) at maximum. If the pressure is higher than 145 psi, a pressure-reducing valve must be installed before the water inlet.
Installation Instructions Drainage B WARNING • Drain hose should not be bent. Be sure that there are no kinks or cuts on it. • Drain hose outlet must not contact the drained water. Drain hose may be connected into a sink, into the drain of a sink, to a standpipe and floor drain. • When connecting into a sink, the drain hose should be placed at the edge of the sink and secured with the hose guide supplied by the manufacturer.
Installation Instructions Installation Checklist • Water inlet hoses and accessory bags must be removed from the wash drum. • Transportation/shipping bolts must be removed. • Washer must be properly leveled by using the adjustable feet. • Water inlet hoses are connected to the water faucets, secured and checked for any leaks by turning on both faucets. • Drain installation is done properly and drain hose is checked and secured to prevent any flooding.
Installation Instructions Disposal Information Packing Disposal A WARNING C CAUTION • Packing materials of the appliance are potentially dangerous for children. Materials such as plastic bags, films or wrappings must be kept away from children or disposed properly to prevent the danger of suffocation. • Packing materials are made of biodegradable and recyclable substances. You should consult your local authority or dealer about the environmental-friendly disposal of the packaging of your appliance.
4 Operating Instructions First Use A WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Before the first use, • Be sure that the washer is installed properly by a qualified installer or service technician in accordance with all national and local codes and requirements. • Read all instructions carefully before using the washer. • Check that shipping bolts are completely removed.
Operating Instructions A WARNING • Be sure that siiica gel package, which is located inside the drum, has been removed from the washer before the first use. Granules in this package do not contain poisonous or harmful materials. It is not a detergent and it is not adible. Do not swallow. Do not use for any purpose. Throw into the recycle bin together with this package before the first usage of the washing machine.
Operating Instructions C CAUTION C CAUTION • Wash the items which are care labeled as “machine-washable”. Do not machine wash items that are having symbol on fabric care label. • Sort the laundry according to the following fabric types, color groups and wash them separately: • White and color fast fabrics • Non-fast, colored fabrics • Permanent press items(mens shirt, dress pants, poly-cotton blends) • Delicate fabrics (silk, rayon etc.
Operating Instructions • Place small items of laundry (e.g. tights) in a cloth bag, pillow case or something similar. This can also help you to avoid searching for lost socks. • Handle curtains special care. Remove non-stainless curtain runners and lead tape. Place runners that can’t be removed in a cloth bag, pillow case or something similar. • Heavy stains should be pretreated with soapy water appropriately before washing (Do not rub or scratch the stained area).
Operating Instructions • Before washing a single or a few items such as a pillow, a teddy bear, a single or a pair of shirts, sweat shirts etc, put some additional items in the drum for better load distribution and spinning. • Make sure that there is no clothing obstructing the door or caught between the door and rubber seal. • Push the loading door firmly and make sure that the door has been closed properly (especially if you load the washer with full load or big items).
Operating Instructions C CAUTION • The detergents labeled as “HE compatible” may also lead to high sudsing and inefficient tumble action. Don’t use such detergents. Always follow the instructions and information given by laundry detergent manufacturers when using these products. A WARNING • Store laundry detergents and additives in a cool, dry place out of children’s reach due to danger of chemical poisoning and skin irritation.
Operating Instructions Light soiling No visible stains or soiling Normal soiling A few visible light stains or soiling Heavy soiling Highly visible stains or soiling Detergent Dispenser Detergent dispenser of your washer has three separate compartments for main wash detergent, fabric softener and liquid bleach. Each of these laundry additives are automatically dispensed at appropriate time during wash program. C CAUTION • Do not put laundry additives directly in the wash drum.
Operating Instructions (II) Main Wash Detergent Compartment Add HE (High efficiency) powder detergent to this compartment numbered as “II” before starting the wash program. Use the detergent manufacturer’s dosing cup and follow the instructions on the package. If you use a liquid detergent, be sure to use a HE (High efficiency) detergent and add detergent directly to main wash compartment before operating your washer.
Operating Instructions Liquid Fabric Softener Compartment Add the recommended amount of liquid fabric softener to the middle compartment marked as “” and dilute it with warm water to the maximum fill line. C CAUTION • Especially concentrated fabric softeners must be diluted with warm water otherwise siphon may be clogged in time. Do not fill the fabric softener above the maximum fill line as any excess amount will mix into the wash water and you will have to re-fill the compartment.
Operating Instructions (I) Liquid Chlorine Bleach Compartment Add liquid chlorine bleach to the right compartment numbered as “I”. Measure 1/3 cup (80 ml) of bleach and pour it into the special container located in the right compartment of the dispenser. This container ensures dispensing and dilution of bleach during the first rinse of wash cycle. There is a maximum fill line on the container. Do not exceed the maximum fill line to prevent early dispensing. Early dispensing may damage your clothes.
5 Selecting a Program and Operating Your Washer Control panel 1 2 3 4 8 7 6 5 1 - Program selection knob (Uppermost position On / Off) 2 - Duration information display 3 - End Time Setting button 4 - Program Follow-up indicator lights 5 - Start / Pause button 6 - Auxiliary function buttons 7 - Spin speed adjustment button 8 - Temperature adjustment button 36 / English Front-Loading Automatic Washer
Selecting a Program and Operating Your Washer Programs • Heavy Duty Use to wash your heavily soiled, durable cotton and linen laundry. Heavy Soil option is automatically selected for a perfect cleansing. Heavy Soil option prolongs heating step. • Cottons / Normal You can wash your durable white and colorfast items with this cycle. Washes with vigorous tumbling movements.
Selecting a Program and Operating Your Washer • Allergen Applying a steam step at the beginning of the programme allows to soften the dirt easily. Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) that requires an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to the steam application before the programme, long heating duration and additional rinsing step.
Selecting a Program and Operating Your Washer • Mixed Fabric Use to wash your cotton and synthetic clothes together without sorting them. • Cool Clean Use to wash your moderately soiled and durable cotton/synthetic laundry. An effective and energy efficient washing is provided thanks to the intense washing action. • Down Wear Use this programme to wash your coats, vest, jackets etc. containing feathers with a “machine-washable” label on them.
Selecting a Program and Operating Your Washer Program selection 1 Determine the program suitable for the type, quantity and soiling level of the laundry in accordance with the “Program and consumption table”. C CAUTION • Programmes are limited with the highest spin speed appropriate for that particular type of fabric. • When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. Always select the relevant lowest required temperature.
Program and consumption table Cottons/ Normal 00:43 03:07 Hot-cold 167/75 Hot Hot-cold 86/30 Hot-cold 81/27 Hot-cold 77/25 Tap Cold Cold 60/15 Extra Hot Hot-cold 167/75 Hot Hot-cold 118/48 Hot-cold 104/40 Hot-cold 86/30 Cold 60/15 Hot-cold 153/67 Hot-cold 111/44 Cold Hot-cold 86/30 Extra Hot Hot-cold 167/75 Hot-cold 153/67 Hot-cold 104/40 Hot-cold 86/30 Warm • • - - Warm * - - • Cold Tap Cold Organic Wash Allergen Hot 03:05 03:44 Warm Hot Warm -
Hot Perm Press 01:29 Warm Cold - • • • Tap Cold Sports Wear Warm 01:15 Cold - - - - Tap Cold Mixed Fabric Warm 01:30 Cold - • - • Tap Cold Delicates / Dark Warm 01:20 Cold - - - - Tap Cold Hand Wash / Wool Warm 01:02 Cold - - • - Tap Cold Hot Down Wear 01:38 Warm Cold Tap Cold - • • - "Wash Water "Max Spin Temperature Speed °F / °C" (rpm)" Hot-cold 140/60 Hot-cold 110/43 Hot-cold 86/30 Cold 60/15 Hot-cold 95/35 Hot-cold 86/30 Cold 60/15 Hot-cold
Quick Wash 00:35 AntiWrinkle+ - - - Hot-cold 167/75 Extra Hot Hot-cold 167/75 Hot Hot-cold 140/60 Hot-cold 104/40 Hot-cold 86/30 Cold 60/15 Hot-cold 86/30 Cold 60/15 90 Warm - - • • Cold Tap Cold CoolClean 02:00 "Wash Water "Max Spin Temperature Speed °F / °C" (rpm)" Cold Tap Cold - - - • Low Load Capacity Extra Rinse - Water Intake Soak Extra Hot Heavy Soil Tub sanitize 02:48 Wash Cycle Default Duration Program and consumption table - Extra High Full Ex
Selecting a Program and Operating Your Washer Temperature selection Whenever a new programme is selected, the recommended temperature level for the selected programme appears on the temperature indicator. C CAUTION • If the programme has not reached the heating step, you can change the temperature without switching the product to Pause mode. To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
Selecting a Program and Operating Your Washer Spin speed selection Whenever a new programme is selected, the recommended spin speed level of the selected programme is displayed on the spin speed indicator. C CAUTION • If the programme has not reached the spinning step, you can change the spinning speed without switching the product to Pause mode. To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Selecting a Program and Operating Your Washer Auxiliary function selection Select the desired auxiliary functions before starting the programme. The chosen auxiliary function indicator will light up. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
Selecting a Program and Operating Your Washer Auxiliary functions • Heavy Soil This function increases washing times for heavily soiled items for better wash results. • Extra Rinse When this function is selected, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remaining detergent on the clothes will be decreased. • Soak This function is used for heavily soiled items when you want to pretreat them before washing.
Selecting a Program and Operating Your Washer End Time With the End Time function, the endup of the programme may be delayed up to 19 hours. After pressing the End Time button, the program’s estimated ending time is displayed. 19 1 Open the loading door, place the laundry inside and add detergent, etc. 2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3 Set the end time of your choice by pressing the End Time button. 4 Press Start / Pause button.
Selecting a Program and Operating Your Washer C CAUTION • When the End Time selection is completed, the time that appears on the screen is the total of the end time chosen with the duration of the selected program. • Do not use liquid detergents when you activate the End Time function! There is a risk of staining the clothes. Changing the selections after program has started After the programme has started you can make the following changes.
Selecting a Program and Operating Your Washer Child Lock Use the Child Lock function to prevent children from tampering with the product. You can also avoid any changes being made in a running program. C CAUTION • You can switch the product on and off with the On / Off button when the Child Lock is active. When you switch on the product again, the program will resume from where it has stopped. To activate the Child Lock: Press and hold the 2nd auxiliary function button for 3 seconds.
6 Preparation 1. Turn on both hot and cold water faucets fully. Check and be sure the water connection is tight. 2. Place the laundry in the drum. 3. Add laundry additives (e.g. detergent, fabric softener,bleach). Starting the program 1. Close the door 2. Press the Start / Pause button to start the program. 3. The program follow-up light showing the startup of the program will turn on. 4. The door locks and the door led will light up. 5.
Preparation Adding or taking out laundry This is only possible under the following conditions: • During time delay, C CAUTION • Washer allows adding more laundry during a future step only if the water level is low enough to open the loading door or if the temperature in the washer is low 1. Press the Start / Pause button to switch the product to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2.
Preparation Your machine will end the programme when you turn the Programme Selection knob; however, it does not drain the water inside. When you select and start a new programme. C CAUTION • Depending on the step where the programme was canceled in, you may have to put detergent and softener again for the programme you have selected anew.
Preparation Energy saving mode After you switch on your machine with program selection knob, if no programme is started or no other procedure is performed at the selection step or no action is taken within approx. 10 minutes after the selected programme ends, your machine will switch to energy saving mode automatically and the display and program follower indicators will be completely turned off.
7 User maintenance instructions A WARNING • Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock. Cleaning detergent dispenser Remove any powder/liquid residue buildup in the dispenser drawer. To do this; 1. Press the dotted point on the siphon of the softener compartment and pull towards yourself until the it is removed from the dispenser.
User maintenance instructions Cleaning the door seal Be sure to check the rubber door seal after unloading your washer. Pull the seal back to search for any foreign objects. Residual metal objects such as pins and coins may form rust stains on rubber seal, and cause the seal to leak. Wipe the stained areas with soapy water using a damp cloth. Then wipe with a dry cloth properly. Do not use an abrasive scrubbing agent when cleaning rubber seal.
User maintenance instructions Cleaning the outer cabinet and control panel When necessary: • Wipe the exterior panels of your washer with soapy water or mild detergent. Dry it with a soft cloth. • Use only a soft and damp cloth to clean the control panel. C CAUTION • Never use a sponge or scrubbing material. These will damage the painted and plastic parts.
User maintenance instructions Cleaning the drain pump filter Filter system in your washer prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharging of the washing water. Thus, a good water discharge is achieved and the pump life is extended. • If your washer fails to drain the water, the pump filter may be clogged. You may have to clean it occasionally to prevent any clogging. Water must be drained completely to clean the pump filter.
User maintenance instructions 3. Follow the below procedures in order to drain water. Product has an emergency water draining hose, in order to drain the water: a Pull the emergency draining hose out from its seat b Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of the hose by replacing the plug.
User maintenance instructions Descaling the washer Hard water can cause scale build-up inside the drum and other parts of your washer in time. Scaling may lead to some serious problems such as clogging in hoses, heater or pump failure eventually. To prevent scaling, wash drum should be cleaned frequently. Do not use abrasive materials such as metal wool while cleaning the drum. Take the manufacturer’s instructions into account if you are using a descaling agent.
8 Troubleshooting Problem A program cannot be started or selected. Reason Solution The product may have * To cancel the programme, switched to self protection turn the Programme mode due to a supply problem Selection knob to select (line voltage, water pressure, another programme. etc.). Previous programme will be canceled. (See "Canceling the program") There is water Some water might have * This is not a failure; water is remained in the product due to not harmful to the product.
Troubleshooting Problem Reason Product vibrates Product might be standing or makes noise. unbalanced. A hard substance might have entered into the pump filter. Transportation safety bolts are not removed. Laundry quantity in the product might be too little. Excessive laundry might be loaded in the product. Solution * Stablize the product by adjusting the feet. * Clean the pump filter. * Remove the transportation safety bolts. * Add more laundry to the product.
Troubleshooting Problem Loading door cannot be opened. Reason The cover lock is activated due * to the water level inside the product. Washer might be heating up the water or it may be at the * spinning cycle. Due to electrical safety mechanism, the door can only * be opened a few minutes after the program has stopped. Child lock is engaged. Door lock will be deactivated a * couple of minutes after the programme has come to an end.
Troubleshooting Problem Washing takes longer than specified in the manual.(*) Reason Water pressure is low. * Supply voltage might be low. * Input temperature of the water * might be low. Number of rinse cycles and/ * or amount of rinse water might have increased. Solution Product waits until taking in an adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
Troubleshooting Problem Reason Programme Timer may stop during water intake. time does not countdown. (On models with display) (*) * Timer may stop during the heating step. * Timer may stop during spinning step. * Product does There might be an unbalanced * load in the product. not switch to spinning step. (*) Solution Timer indicator will not countdown until the product takes in an adequate amount of water.
Troubleshooting Problem Washing performance is poor: Laundry turns Grey. (**) Washing performance is poor: Stains persist or the laundry is not whitened. (**) 66 / English Reason Solution Insufficient amount of * Use the recommended detergent has been used over amount of detergent a long period of time. appropriate for water hardness and type of laundry. Washing was made at low * Select the proper temperatures for a long time. temperature for the type of laundry to be washed.
Troubleshooting Problem Washing performance is poor: Stains could not be removed. Laundry could not be whitened. Reason Wrong program cycle and temperature might have been selected. * * Using insufficient amount of detergent. * Using wrong type of detergent. Mixing different sorts of items. * * Mixing different types of laundry additives. Detergent residue left on the laundry. * Excessive laundry may be * loaded into washer. Excessive laundry might have * been loaded in.
Troubleshooting Problem Washing performance is poor: Oily stains appear on laundry. Washing performance is poor: Clothes smell unpleasant. (**) Reason Oily accumulations of prior * wash cycles on the drum may have stuck to the laundry. The detergent may have been placed into the wrong * compartment; the detergent may be mixed with the softener. Odours and bacteria layers are * formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes.
Troubleshooting Problem Rinsing performance is poor. Reason * Intermediate spins may be skipped. * The amount and storage conditions of the detergent used might not be appropriate. Not using HE detergent Using excessive amount of detergent Drain hose may be folded. * * * * Drain pump filter or drain itself may be clogged. Laundry became Insufficient amount of detergent is used. stiff after washing. (**) Detergent is put in the wrong compartment. * * Detergent might be mixed with * the softener.
Troubleshooting Problem Reason Laundry does Detergent is put in the wrong not smell like the compartment. softener. (**) * Detergent might be mixed with * the softener. Softener might have been released early. * * * Detergent residue in the detergent drawer. (**) Detergent is put in a wet drawer. Detergent has gotten damp. * Water pressure is low. The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked.
Troubleshooting Problem Reason Solution Too much foam Not using HE detergent * Use HE detergent. forms inside the Excessive amount of detergent * Use only a sufficient amount is used. of detergent. product. (**) Detergent was stored under * Store detergent in a closed improper conditions. and dry location. Do not store in excessively hot places. Some meshed laundry such * Use smaller amounts of as tulle may cause too much detergent for this type of foam because of their texture. item.
Troubleshooting Problem Laundry remains wet at the end of the programme. (*) Washer fills with water when a process is cancelled. Time delay function does not work. Reason Solution Excessive foam might have * Use the recommended occurred and automatic foam amount of detergent. absorption system might have been activated due to too much detergent. Unbalance detection due to * Add more laundry (e.g.
Troubleshooting Problem Reason Solution (*) The product does not switch to the spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surroundings. Laundry should be rearranged and re-spun. (**) Regular drum cleaning is not performed. Clean the drum regularly.
9 WARRANTY STATEMENT FOR THE BEKO CLOTHES WASHERS The warranties provided by Beko in these statements only apply to Beko washers sold to the original purchaser or homeowner in the US and Canada. The warranty is not transferable. To obtain warranty service, please contact our nearest distributor as listed by state. You will need your washer model number, serial number, retailer name and address, where purchased and purchase date / installation date.
10 HOW TO GET SERVICE Please contact your local authorized Beko dealer, or call our Toll Free Customer Hotline number at 1-888-352 BEKO (2356) for direction to an Authorized Beko Service Agent or contact via http://www.beko. us . You can also look up for authorized dealer list at “Where To Buy” section at the website for further reference.
www.beko.
