Droogautomaat Dryer DCU 7330 X DCU 7330 XS DCU 7330 XB
Lees deze handleiding grondig door voor u het product in gebruik neemt! Geachte Klant We hopen dat uw product, dat in een moderne fabriek werd geproduceerd en dat de strengste kwaliteitscontroles heeft ondergaan, u zeer goede resultaten geeft. We adviseren u deze handleiding grondig door te lezen voor u het product voor het eerst gebruikt en deze bij te houden voor later gebruik. Deze gebruikershandleiding zal u helpen uw machine snel en veilig te gebruiken.
1 Belangrijke veiligheidsinformatie Deze sectie bevat veiligheidsinformatie die zal helpen om de risico’s op persoonlijke verwondingen of materiële beschadigingen te beperken. Indien u deze instructies niet opvolgt, vervalt elke garantie en vervalt de productaansprakelijkheid van de fabrikant. • • • • Algemene veiligheidsvoorzorgen • • • • • • • • • • • • • • • Plaats de machine nooit op een vloer die met tapijt is bedekt.
• Voor storingen die niet kunnen worden opgelost door de informatie in de veiligheidsinstructies op te volgen: Schakel de machine uit, trek de stekker uit het stopcontact, draai de waterkraan dicht en neem contact op met een erkend onderhoudsbedrijf. • Stop de droogautomaat nooit voor de droogcyclus is beëindigd, tenzij u alle wasgoed snel uit de droogautomaat verwijdert om het uit te spreiden en de hitte te verspreiden.
2 Installatie Neem contact op met uw dichtstbijzijnde erkend servicepunt voor installatie van uw product. C Voorbereiding van de locatie en elektrische installatie voor het product is de verantwoordelijkheid van de klant. B Installatie en elektrische aansluitingen moeten worden uitgevoerd door gekwalificeerd personeel. A Controleer voor de installatie visueel of het product defecten heeft. Laat het in dat geval niet installeren. Beschadigde producten kunnen uw veiligheid in gevaar brengen.
1. Verwijder de slang op de machine door aan het uiteinde ervan te trekken. Gebruik geen gereedschappen om de slang te verwijderen. 2. Sluit de speciale afvoerslang die hij de machine geleverd is aan op de slangbevestiging. 3. Het andere einde van de afvoerslang kan rechtstreeks worden verbonden op de afvalwaterafvoer of op de wasbak. De plaatsing moet altijd vastgemaakt worden in alle types aansluiting.
Technische specificaties FL 2 Hoogte (aanpasbaar) 84.6 cm Breedte 59.5 cm Diepte 53 cm Capaciteit (max.) 7 kg Gewicht (netto) 36 kg Voltage Aangeduid gebruikt vermogen Zie typeplaatje Modelcode Typeplaatje bevindt zich achter de vuldeur.
3 Initiële voorbereidingen voor het drogen Dingen die u kunt doen om energie te besparen: • • • • • • • • • • • • Zorg ervoor dat u het product volledig gevuld gebruikt, maar let op dat u het niet te zwaar belaadt. Centrifugeer uw wasgoed op de hoogst mogelijke snelheid bij het wassen. Zo wordt de centrifugetijd verkort en neemt het energieverbruik af. Let op dat u dezelfde soorten wasgoed samen droogt. Volg de instructies in de gebruikershandleiding voor programmaselectie.
• • materiaal met rubberen versterking en rubberen schuimkussentjes mogen niet in de droogautomaat worden gedroogd. Gebruik geen wasverzachters of producten om statische elektriciteit te verwijderen tenzij ze zijn aanbevolen door de fabrikant van de wasverzachter of het product. Droog ondergoed verstevigd met metalen onderdelen niet in de droogautomaat. Als deze metalen verstevigingen tijdens het drogen losraken en breken, beschadigen ze uw droogautomaat.
4 Een programma selecteren en uw machine bedienen Bedieningspaneel 1 9 2 8 7 3 6 4 1. Centrifugeersnelheid wasmachine*/ Selectie timerprogramma Centrifugesnelheid gebruikt om het wasgoed in de wasmachine te centrifugeren / Geeft de tijd voor timerprogramma’s aan. 2. Display Geeft de status van de machine aan. 3.Starten/Pauze/Annuleren-knop Wordt gebruikt om het programma te starten, te pauzeren of te annuleren. 4. Programmaselectieknop Wordt gebruikt om een programma te selecteren. 5.
De machine klaarmaken voor gebruik 1. Steek de stekker van de machine in het stopcontact. 2. Plaats het wasgoed in de machine. 3. Druk eerst op de Aan/Uit-knop. C Drukken op de knop “Aan/Uit” betekent niet noodzakelijkerwijze dat het programma gestart is. Druk op de knop "Start/Pauze/Annuleren" van de machine om het programma te starten. Programmaselectie Zoek het geschikte programma in de onderstaande tabel die de droogtemperatuur in graden aangeeft.
U kunt een van de timerprogramma’s 10 min., 20 min., 30 min., 40 min., 50 min., 60 min., 80 min., 100 min., 120 min., 140 min. en 160 min. selecteren om het gewenste droogteniveau bij lage temperaturen te verkrijgen. Het programma droogt op de geselecteerde tijd ongeacht de droogtemperatuur. Tijddisplay Dit display toont de tijd die resteert voor het programma voltooid is terwijl het programma bezig is. De tijd wordt weergegeven in uren en minuten als “02:30”.
Programmaselectie en verbruikstabel Programmatabel FL Programma’s Capaciteit (kg) Centrifugeersnelheid in wasmachine (tpm) Hoeveelheid resterende vochtigheid bij benadering Droogtijd (minuten) Katoen/Gekleurde was A Extra droog 7 1000 % 60 124 A Kastdroog 7 1000 % 60 116 A Strijkdroog 7 1000 % 60 90 2 1200 % 50 35 1.5 1200 % 50 40 4 1200 % 50 80 Xpress 35 Hemden Jeans Fijne was 1.
Hulpfunctie Waarschuwingslampjes C Audiowaarschuwing Audiowaarschuwing Audiowaarschuwing Audiowaarschuwing Audiowaarschuwing annuleren niveau 1 niveau 2 niveau 3 Uw droogautomaat geeft een audiowaarschuwing wanneer het programma ten einde is. Als u deze waarschuwing niet wilt horen of u wilt het volumeniveau veranderen, moet u op de knop “Volumeniveau” indrukken. Er wordt geen audiowaarschuwing gegeven als “x” op het scherm verschijnt. C U kunt deze functie selecteren voor of nadat het programma start.
Met de functie “Startuitstel” kunt u de start van het programma tot 24 uur uitstellen. 1. Open de vuldeur en voeg wasgoed toe. 2. Stel het droogprogramma en de centrifugeersnelheid in en selecteer indien nodig de hulpfuncties. 3. Druk op de knoppen “startuitstel” “+” en “-” om het gewenste startuitstel in te stellen. Het startuitstelsymbool knippert. 4. Druk op de “Starten/Pauze/Annuleren”-knop. Vervolgens begint de startuitstel af te tellen. Het startuitstelsymbool gaat branden.
2. Open de deur in de pauzepositie en sluit deze opnieuw nadat u wasgoed hebt toegevoegd of verwijderd. 3. Druk op de knop “Start/Pauze/Annuleren” om het programma te starten. C Alle wasgoed dat toegevoegd werd nadat het droogproces al gestart was, kan de reeds droge kleding in de machine doen vermengen met de natte kleding en het resultaat zal nat wasgoed zijn nadat het droogproces beëindigd is.
5 Onderhoud en reiniging Filter-cartridge / Binnenoppervlak deur De pluizen en vezels die in de lucht vrijkomen van het wasgoed tijdens de droogbeurt, worden verzameld in de “filter-cartridge”. Sensor C Zulke pluizen en vezels worden meestal gevormd tijdens het dragen en wassen. C Reinig de filter en het binnenoppervlak altijd na elke droogbeurt. C U kunt de filter en het filtergebied reinigen met een stofzuiger. Om de filter te reinigen: 1. Open de vuldeur. 2.
Waterreservoir; Het vocht in het natte wasgoed wordt uit het wasgoed gehaald en gecondenseerd. Maak het waterreservoir na elke droogbeurt of tijdens het drogen leeg wanneer het waarschuwingslampje “Waterreservoir” begint te branden.
4. Reinig de condensor door gebruik van een douchekop met water onder druk en wacht tot het water is weggelopen. 5. Plaats de condensor terug in de behuizing. Bevestig de twee vergrendelingen en controleer dat deze stevig vast zitten. 6. Plaats de beschermplaat terug.
6 Voorgestelde probleemoplossing Het droogproces duurt te lang • De netstructuur van de filter kan verstopt raken. Met water wassen. Het wasgoed is nat aan het einde van de droogbeurt. • • De netstructuur van de filter kan verstopt raken. Met water wassen. Mogelijk werd er teveel was in de machine geladen. De droogautomaat niet overladen. De droogautomaat gaat niet aan of het programma start niet. De droogautomaat is niet geactiveerd wanneer ingesteld.
Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will • Help you use your machine in a fast and safe way. • Read the User Manual before installing and starting your product.
1 Important safety information This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void. General safety • Never place the machine on a carpet-covered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.
• • • • occurs without applying heat to ensure that the items are left at a temperature that will not damage them. Fabric softeners or similar products should be used as specified by the fabric softener instructions. Underwear that contains metal reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying. Check all garments for forgotten lighters, coins, metal pieces, needles, etc. before loading.
2 Installation Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’s responsibility. BInstallation and electrical connections must be carried out by a qualified personnel. A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety.
CNever unscrew the adjustable feet from their housings. Electrical connection Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table. Our company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding. • Connection must comply with national regulations.
Disposing of the old machine Dispose of your old machine in an environmentally friendly manner. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine. Before disposing of your old machine, cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children. Technical specification EN 2 Height (adjustable) 84.6 cm Width 59.5 cm Depth 53 cm Capacity (max.
3 Initial preparations for drying hings to be done for energy saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased. • Pay attention to dry same types of laundry together. • Follow the instructions in the user manual for programme selection.
• Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer. • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.
Loading the laundry 1. Open the loading door. 2. Place the laundry in the machine without compressing. 3. Push the loading door to close. Ensure that no items are caught in the door.
4 Selecting a Programme and Operating Your Machine Control panel 1 9 2 8 7 3 4 5 6 1. Washing machine spin speed*/ Timer programme selection Spin speed used to spin the laundry in the washing macthine / Indicates the time for timer programs. 2. Display Indicates the status of the machine. 3. Start/Pause/Cancel button Used to start, pause or cancel the programme. 4. Programme selection knob Used to select a programme. 6.
Preparing the machine 1. 2. 3. C •Xpress 35 You can use this programme to dry your cotton laundry that you have spun at high speeds in your washing machine.This program dries 2 kg cotton laundry (2 Shirts / 5 T-shirts) in 35 minutes. C To obtain better results from your dryer, your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine. Plug in your machine. Place the laundry in the machine. Press the “On/Off” button.
•Ventilation Only ventilation is performed for 10 Tminutes without blowing hot air. You can air your clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme. •Timer programs You can select one of the 10 min., 20 min., 30 min., 40 min., 50 min., 60 min., 80 min., 100 min., 120 min., 140 min. and 160 min. timer programmes to achieve the desired final drying level at low temperatures.
Programme selection and consumption table Programme table EN Programs 2 Capacity (kg) Spin speed in washing machine (rpm) Approximate amount of remaining humidity Drying time (minutes) Cottons / Coloreds A Extra dry 7 1000 % 60 124 A Cupboard dry 7 1000 % 60 116 A Iron dry 7 1000 % 60 90 Xpress 35' 2 1200 % 50 35 Shirt 1.5 1200 % 50 40 Jeans 4 1200 % 50 80 Delicates 1.75 600 % 40 40 Mixed 4 1000 % 60 83 Sport 4 1000 % 60 90 Wool Refresh 1.
Auxiliary function Audio Warning Cancel audio warning Audio warning level 1 Audio warning level 2 Audio warning level 3 Your dryer will give an audio warning when the programme comes to an end. If you do not want to hear this buzzing or want to change the volume level, you need to press the “Volume level” button. No audio warning will be given when “x” appears on the screen. C You can select this function either before or after the programme starts.
Canceling the time delay Door open If you want to cancel the time delay countdown and start the programme immediately: 1. Press “Start/Pause/Cancel” button for 3 seconds to cancel the programme. 2. Then, press “Start/Pause/Cancel” button to start the desired programme. Starting the programme Dryer door open symbol lights up. 1. Press “Start/Pause/Cancel” button to start the programme. 2.
Changing the programme after the programme has started Child-proof lock You can use this feature to dry your laundry in a different program after your machine has started to run. For example; Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra Dry” programme instead of “Iron Dry” programme. Select the “Extra Dry” program by rotating the program knob. Press “Start/ Pause/Cancel” button to start the program.
C If you change the position of programme selection knob while your machine is running, then the machine stops, current programme is cancelled and new programme information is displayed. End of programme “Filter cleaning” and “Water tank” warning symbols light up and “End” label appears on the screen in the programme follow-up indicator when the programme ends. The door can be opened and the machine becomes ready for a second cycle. Press “On/Off” button to turn off the dryer.
5 Maintenance and cleaning Filter Cartridge / Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”. C Such fibre and lint are generally formed during wearing and washing. C Always clean the filter and the inner surfaces of the cover after each drying process. C You can clean the filter and filter area by vacuum cleaner. To clean the filter: 1. Open the loading door. 2.
Water tank; The moisture in the damp laundry is taken from the laundry and condens ed. Drain the water tank after each drying cycle or during drying when “Water tank” warning light turns on. A Condensed water is not drinkable! A Never take out the water tank when the programme is running! If you forget to drain the water tank, your dryer will stop during the following drying cycles when the water tank is full and the “Water tank” warning light will turn on.
4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover.
6 Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not load the dryer in excess. Dryer does not switch on or the programme does not start. Dryer is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in. • The loading door may be ajar.