Installation Manual

24
USA
8. INSTALLER CHECKLIST
Your nstaller must have completed and
checked the followng:
• The dishwasher is square and level.
• The dishwasher is fastened securely
to the cabinetry.
• The dishwasher door opens and closes
freely. The dishwasher door must
close without hitting any cabinetry or
counter top.
• The inlet water supply is turned on
and checked for leaks.
• The drain hose has been connected
and checked for leaks. There must be
no kinks or obstructions in the drain
hose.
• The drain hose must be installed with
a 28" (710mm) high drain loop for drain
hook-ups without any air removed.
• If the dishwasher drain is hooked up to
a garbage disposal, the drain hopper
plug must be removed.
• The spray arms are free and rotate
freely.
• The rinse cycle has been run.
• The water level will be below the
filter screen after the end of the wash
program. It is normal to find some
water in the drain filter area.
9. SELF HELP HINTS:
The screen does not come on:
• Check to make sure the breaker to the
dishwasher is in the on position.
• Check to make sure that the Supply
cord is plugged.
No Water is coming into the
dishwasher:
• Check to make sure the hot water
shut-off is in the ON position.
Water does not drain:
• Make sure drain hose is not kinked or
comes out of air gap next to the sink.
• Remove drain hose from disposal
making sure plug is removed.
NOTICE :
• If your dishwasher is not operating
properly after following these steps:
Contact your dealer to schedule an
authorized service agent to inspect
your new dishwasher for any function
related failure.
• The manufacturer warranty does
not cover installation, conversion or
customer education service visits.
You wll fnd the model and seral number
nformaton on the label located on the
rght-hand sde of the nner door of your
dshwasher, as shown above.
NOTICE :
Please make a copy of your nvoce and
keep t wth ths manual and regster your
dshwasher on-lne.