Dishwasher User manual DDT36430X DDT36430XIH USA Document Number : 15 9266 01 00_AA_BEKO_E9_USA/ 03-08-18.
Dishwasher User manual DDT36430X DDT36430XIH USA Document Number : 15 9266 01 00_AA_BEKO_E9_USA/ 03-08-18.
To prevent accidents, which could cause serious injury or death, as well as machine damage read these instructions before installation and / or use. CONTENTS 1. IMPORTANT SAFETY INSTRUCTIONS 1 3. GETTING TO KNOW YOUR DISHWASHER 4. LOADING THE DISHWASHER 4 5 2. RECYCLING 3 4.1 UPPER RACK 4.2 LOWER RACK 4.3 PROPER AND IMPROPER LOADING OF DISHWARE 7 10 16 5. WHAT SHOULD NOT BE WASHED IN YOUR DISHWASHER 6. OPERATING THE PRODUCT 17 18 6.9 RINSE AID INDICATOR ( ) 6.10 END OF PROGRAM 6.
1. IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION Please read this user manual and particularly the safety instructions completely and carefully. They will save you time and effort and help to ensure optimum dishwasher performance. Be sure to observe all listed warnings and cautions. Look particularly for the icons with exclamation marks inside. The information icon will also provide important references.
•• •• •• •• •• •• •• •• •• •• •• Do not operate your dishwasher unless all the enclosure panels are properly in place. Do not tamper with the controls. Do not abuse, sit on, stand in or on the door or dish rack of the dishwasher. The cup racks are designed to support cups, glasses and kitchen utensils. When the cup racks are in the dishwasher do not lean on or use the cup racks to support your body weight. To reduce the risk of injury, do not allow children to play in, on or near the dishwasher.
•• •• •• This appliance produces ozone within the washing compartment during normal operation. Long-term exposure to ozone or exposure at elevated levels may result in respiratory problems, especially for the infirmed, elderly and children. Chidren should not operate this machine without adult supervision. Be Careful to not leave the door fully open when not being loaded or unloaded to prevent someone from tripping on the unit. A A unit, “tripping” the circuit breaker or removing the fuse.
3. GETTING TO KNOW YOUR DISHWASHER 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Cutlery basket 5. Door 6. Model and Serial Tag 7. Control panel 8. Detergent and rinse agent dispenser 9. Lower basket 10. Filters 11. Salt container (Select Models) 12. Upper basket rail 13. Upper cutlery basket (Select Models) 14. Tabletop (Select Models) 15.
4. LOADING THE DISHWASHER 1. 2. 3. Upper rack (International Pattern) Pull the handle to open the door. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will continue. Remove coarse food leftovers from tableware. Now you can load the dishwasher.
Upper cutlery basket (Select Lower rack (Select Models) Models) Additional Loading Pattern – Bottom rack (10 place settings) International Loading Pattern – Upper cutlery basket (12 place settings) Upper cutlery basket (Select Upper rack (Select Models) Models) Upper cutlery basket (MODEL DEPENDING) Additional Loading Pattern – Top rack (10 place settings) International Loading Pattern – Upper cutlery basket (10 place settings) 6 USA
A A A C •• •• •• •• •• •• CAUTION:Large knives and other utensils with sharp tips and edges must be placed horizontally into the upper rack due to risk of injury. Other smaller knives and sharp utensils should be placed with sharp side down in the cutlery basket. •• Do not overload your dishwasher and pay attention to manufacturer instructions regarding dishes which are appropriate for use in for a dishwasher.
COLLAPSIBLE UPPER BASKET WIRES (Select Models) You can use collapsible wires when you need a larger space for your dishes in the upper basket of your machine. To bring the collapsible wires into horizontal position, grab the wire from the middle position and push them in the direction of arrow in the figure. Place your larger dishes into the area created. To bring the wires back to vertical position, just lift them up.
To lower the basket, while it is in the uppermost position; 1. Hold the upper basket wires with both hands, slightly lift up the basket and simultaneously push and release the latches shown in the figure (B). 1 2. Lower the basket from its current position to the lower one. 2 3. Release the basket after it has reached one 3 level down. Repeat the process if the height is not sufficient.
HEIGHT SETTING (Select Models) In certain models, the height setting of the upper rack may be changed using the wheels which are present at two height levels. A 1. 2. CAUTION:Make sure that the rack is empty. Changing the height setting while the rack contains tableware could cause the contents to dislodge, causing personal injury or damage to the tableware. 3. Place the rack into the tracks again at the desired height C. 4. Push the latches back into the correct position. 4.
COLLAPSIBLE LOWER BASKET TINES (Select Models) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once. COLLAPSIBLE LOWER BASKET TINES (Select Models) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc.
SILVERWARE BASKET (Select Models) Silverware basket is designed to wash your dishes such as knife, fork, spoon, etc. in a cleaner manner. Since the cutlery basket can be moved (A, B), you can create a wider space while placing your dishes to the lower basket and free up space for your dishes in different sizes. C SILVERWARE BASKET (Select Models) Silverware basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner.
TRAY WASH SUPPORTS (Select Models) Use the supports to wash trays in the bottom basket. See the Auxiliary functions section for appropriate program and function selection. SOFTTOUCH ACCESSORY (Select Models) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. LOWER BASKET GLASS HOLDER (Select Models) Lower Basket Glass Holder found in the lower basket of your machine enables a safe washing for your oversized and tall glasses.
LOWER BASKET MULTIPURPOSE / HEIGHT ADJUSTABLE SERVICE RACK (Select Models) This accessory located at the lower basket of your machine allows you to easily wash pieces such as extra glasses, long ladles and bread knives. C A You may use the racks as required by moving them to lower or upper position, or close them to create a wider space in your lower basket. Make sure that the impeller does not touch the dishes you placed on the racks.
CEILING CUTLERY BASKET (Select Models) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. on the tray. When the side trays lean on two side walls, the handle can be pulled to allow the central tray to rise and the system to be locked.
4.
5. WHAT SHOULD NOT BE WASHED IN YOUR DISHWASHER •• •• •• •• •• •• •• •• •• •• Do not wash sponges or dish cloths in dishwasher. Do not wash art and craft articles in dishwasher. Disposable plastics and disposable aluminum cannot withstand high temperatures; do not wash them in the dishwasher. •• Rust-sensitive steel parts like iron and cast iron that can rust and stain other utensils and damage the interior stainless steel liner of the dishwasher and void the warranty.
6. OPERATING THE PRODUCT 2 1 8 7. 5 Function Selection Keys F1 Fast Function F2 SteamGloss Function F3 Sanitize Function F4 Half Load Function 8. Programme Selection Keys 10 11 19 18 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 4 7 1. On / Off Key 2. Menu Key 3. Time Delay Selection / Menu Direction Selection Keys 4. Selection / Confirmation Key 5. Display 6.
On/Off Key PROGRAMME SELECTION 1. When you press the On/Off key, the indicator lights illuminate on the display for ON position. The lights turn off in OFF position. PROGRAMME SELECTION / PROGRAMME CANCEL KEY Select the desired programme using the “programme selection keys” and press the button. To cancel the running programme, open the door of the machine and press and hold the Programme Start/Pause/Cancel key for 3 seconds.
20 USA Medium + + 25-40 High + + 40 (°C) (°F) 15 ml 15-25 ml + 5 ml + + + + 100-135 8,8-21,2 2,32-5,60 + + + 122 20,2 5,34 Main wash Dry Sanitize Duration (minutes) Water (liters) Water (gallons) 3,17 12 65 - + + + 3 15 3-5 15-25 5 25 - + - Few 149 65 118 48 Delicate 3 2,70 10,4 58 - + + - 3-5 15-25 5 25 5-8 25-40 + + - Few - Medium 160 71 116,6 47 Quick&Shine 4 3,10 11,6 35 - - + - 3 15 3 15 3-5 15-25 - - + Few 131 55 113
6.4 AUXILIARY FUNCTIONS Washing programs of your dishwasher are designed to obtain the best cleaning effect, considering the type of the soiling, soiling degree and properties of the dishes to be washed. Auxiliary functions allow you save from time, water and power. Auxiliary functions may cause changes in the program duration. C C Auxiliary functions are not suitable for all washing programs. Indicator of the auxiliary function that is not compatible with the program will not be active.
Functions Under the Settings Menu (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Use <- and +> to proceed to the desired function or setting. Use the selection key to change the desired function or setting and press the Menu key to exit the Settings menu.
Interior Lighting (Select Models) Some models have interior lighting to illuminate the interior when the door is opened. Changing the interior lighting setting 1. After switching on your machine, press the Menu key for 1 second. 2. Press <- and +> to proceed to “L:” on the display. Select the position you want with the Selection key. Interior lighting is off in “L:0” position and on in “L:1” position. 3. Press the Menu key to exit the settings menu. Your setting will be saved automatically.
Floor illumination Illuminates to show program is still running. (Select Models) Your machine reflects a light to the floor during the washing process. This light turns off after the washing process is complete. C Floor illumination cannot be cancelled by the user. 6.5 SCHEDULING THE WASHING TIME Time Delay If an economical electricity tariff is applied in your region, you can use the Time Delay function to wash your dishes during appropriate hours.
C C C C Pay attention not to open the door of the machine when it is running. There may be a rush of vapour when you open the door of your machine; be careful. The machine will be switched off if no button is pressed within 5 seconds after opening the door while the machine is running. C There might be residues of detergent or rinse aid in the machine and/or on the pieces being washed depending on the step the program you have cancelled was in. 6.
3 doses of rinse aid are dispensed in P:3 position. 4 doses of rinse aid are dispensed in P:4 position. washing program is paused and the water inlet is checked regularly by the machine; when the water is restored E:02 icon will disappear after a while and the washing program resumes. 6.10 END OF PROGRAM C When the program you have selected comes to an end, an audible warning signal will warn you to turn off your machine. This audible signal will warn you with certain intervals before it turns off.
7. DETERGENT You can use powder, liquid/gel or tablet detergents in the machine. Only use in the machine the detergents produced particularly for use with dishwashers. We recommend you not to use detergents that contain chlorine and phosphate as they are harmful for the environment. A C 7.1 ADDING DETERGENT C A Pay attention to the warnings on the detergent packaging to get better washing and drying results. Contact the manufacturer of the detergent for further questions.
3. Push the lid of the detergent dispenser to close it. A "click" will be heard when the lid is closed. 1 if the water hardness level is above the mentioned level. The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. C 2 3 C C C Use powder or liquid/gel detergent in short programs without prewash since the solubility of the tablet detergent changes depending on the temperature and time. 7.
7.3 RINSE AID C 1. 4. If there are stains on tableware items after washing, level must be increased and if there is a blue trace after wiping them by hand, it must be decreased. This is set to position 3 as factory default. The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items.
8. ADJUSTING THE WATER SOFTENING SYSTEM (Select Models) Cleaning, rinsing and drying performance of your dishwasher will increase when water softening system is adjusted properly. Adjust the new water hardness level according to the Water hardness level instruction in this booklet. Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. a b 1 min. c d e f 1 Second 1 Minute Remove the test strip from the packet.
If the hardness level of the supply water is below 22 gpg, there is no need to use salt in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously on the panel of your machine. If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the Salt indicator will not illuminate.
1. Firstly, take the lower basket out to add softening salt. 2. Turn the salt reservoir lid counterclockwise to open it (A, B). C You can put about 4.4 Pounds of softening salt into the salt reservoir. C You need to add salt right before starting the machine. Thus, the overflowing salty water will be flushed immediately, preventing the risk of corrosion in machine. In cases where you would not start washing immediately, run your machine empty in the shortest program. 5.
10. CARE AND MAINTENANCE A A A Cleaning the control panel: Use only soft cloth that is lightly dampened with mild detergent. Clean the control panel only with a moist cloth and clear water. WARNING:Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug and turn off the water tap. Cleaning the colored doors: Use only soft cloth that is lightly dampened with mild detergent.
10.3 CLEANING THE FILTERS Clean the filters at least once a week in order for the machine operates efficiently. Check if food residues are left on the filters. If there are food residues on filters, take them out and clean well under running water. 1. Turn the micro filter (1) and coarse filter (2) assembly counterclockwise and pull it out from its seating. 3. Press the two pawls on the coarse filter inwards and separate the coarse filter from the assembly. 4.
10.4 CLEANING THE HOSE FILTER Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary. 1. Turn off the tap and remove the hose. 2. After taking out the filter, clean it under running tap water. 3. Place the cleaned filter back to its seat in the hose. 4.
UPPER WASH ARMS Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the wash arms. Turn its nut to left to remove the upper wash arms. Make sure that the nut is tightened well when installing the upper wash arms.
11. TROUBLESHOOTING Machine does not start. •• Power cable is unplugged. >>> Check if the power cable is plugged in. •• Cicuit Breaker is blown. >>> Check the Cicuit Breaker in your house. •• Water is cut. >>> Make sure that the water inlet tap is open. •• Door of the machine is open. >>> Make sure that you have closed the door of the machine. •• On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button.
•• •• •• Machine is unloaded right after the program is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level. Start unloading process from the lower basket. Thus, dropping of water remained on a piece at upper basket onto the pieces at lower basket is prevented. Selected program is unsuitable.
There is a different odor in the machine •• C A new machine has a peculiar odor. It will fade out after a couple of washing. Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”. •• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the machine right after you have put the dishes into it, remove the remnants on the dishes and run the Prewash program without detergent every 2 days.
•• Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers. •• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents. •• Wash Arm holes are clogged.
Foam forms in the machine. •• Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Removing the coarse soil on the dishes under tap water, with a sponge or towel. •• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the machine when you are filling it.
12. TECHNICAL FEATURES Load capacity Permissible water pressure Electrical connection Total power Heater power C 16 place settings 4.35 - 145 psi (0.3 - 10 bars) 120 V (volts), 12 A (amps), 60Hz (hertz) 1400 W (watts) 1100 W (watts) NOTICE: Because we continually strive to improve our products, we may change our specifications and design without prior notice. This device corresponds to the following directives: UL 749 Household Dishwasher directive.
13. WARRANTY STATEMENT FOR THE BEKO DISHWASHERS The warranties provided by Beko in these statements only apply to Beko dishwashers sold to the original purchaser or homeowner in the US and Canada. The warranty is not transferable. To obtain warranty service, please contact our nearest distributor as listed by state and province. You will need your dishwasher model number, serial number, retailer name and address, where purchased and purchase date / installation date.
to product failure, unauthorized service work or work. This product is fully tested and went through official quality assurance inspections before leaving the original manufacturing site. Warranty terms for this Beko household appliance is not valid if the product is altered, tampered, modifed, additional parts assembled, fixed and re-packed by an authorized distributor, servicer, a third party retailer, reseller or by any other unauthorized person(s).
