Operation Manual

26
EN
• Place the dishes.
• Check if the upper and lower
impellers rotate freely.
• Put sufficient amount of detergent
in the detergent dispenser and
close its lid.
• Press On/Off button.
• Check if the salt and rinse aid
warning indicators (9,10) light and
add salt and/or rinse aid if needed.
• Determine your washing program
with the aid of the Program
Data and Table of Average
Consumption Values.
• You can select the determined
washing program by pressing
program selection button (4).
• You can see the program time in
the Remaining Time Indicator (11).
• If necessary, you can change your
washing program as you prefer
by means of the Add Function
Buttons (5, 6).
• Start the program by pressing the
Start / Pause / Cancel button (2).
WARNING:
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start /
Pause / Cancel button (2) if you have
to open the door. Then, open the door
of your machine. There may be a rush
of vapor when you open the door of
your machine; be careful. Close the
door and press Start/Pause/Cancel
button (2) again. Program will resume
running.
• End of Program indicator (15 c)
will light up.
• Turn off your machine by pressing
On / Off button (1).
• Close the tap.
• Unplug the mains plug from the
wall socket.
• Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of your
machine.