Geschirrspüler
Bitte lesen Sie zuerst diese Anleitung! Lieber Kunde, Wir wünschen uns, dass Sie mit Ihrem neuen Gerät, das in modernsten Werken gebaut und strikten Qualitätskontrollen unterzogen wurde, voll und ganz zufrieden sind. Lesen Sie daher bitte die gesamte Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät verwenden. Bewahren Sie die Bedienungsanleitung am besten gut auf, damit Sie später darin nachlesen können.
INHALT 1. Geschirrspüler 3 2. Wichtige Hinweise zu Ihrer Sicherheit 5 Sicherheit allgemein 5 Bestimmungsgemäßer Gebrauch 6 Sicherheit von Kindern 6 3. Installation/Aufstellung Der richtige Aufstellungsort Wasseranschluss Wasserablauf anschließen Füße einstellen Aquasafe+ Elektrischer Anschluss Erste Inbetriebnahme Verpackungsmaterialien entsorgen Gerät transportieren Altgeräteentsorgung 7 7 7 8 9 9 9 10 10 10 10 4.
1 Geschirrspüler Überblick � �� �� � �� �� � � � � � � � �� 1.Abschlussplatte (je nach Modell) 2.Oberer Sprüharm 3.Unterer Korb 4.Unterer Sprüharm 5.Filter 6.Bedienfeld 7.Tür 8.Spülmittelbehälter 9.Unterer Sprüharmsteckplatz 10.Besteckkorb 11.Salzbehälterdeckel 12.Obere Korbschiene 13.Oberer Korb mit Gestell 14.
Technische Daten Dieses Produkt erfüllt die folgenden EU-Direktiven: Bei der Entwicklung, Produktion und beim Vertrieb dieses Produktes wurden die Sicherheitsrichtlinien der zutreffenden Regulierungen der Europäischen Gemeinschaft eingehalten.
2 Wichtige Hinweise zu Ihrer Sicherheit In diesem Abschnitt finden Sie Hinweise, die für Ihre und die Sicherheit anderer Personen unerlässlich sind. Halten Sie sich unbedingt an diese Hinweise, damit es nicht zu Verletzungen oder Sachschäden kommt. Bei Nichteinhaltung dieser Anweisungen erlöschen sämtliche Garantieansprüche. • Teppichen, Teppichböden oder ähnlichen Unterlagen auf: Durch mangelnde Luftzirkulation unterhalb des Gerätes kann es ansonsten zur Überhitzung elektrischer Komponenten kommen.
Bestimmungsgemäßer Gebrauch • Dieses Produkt wurde für den • • • • • reinen Hausgebrauch entwickelt, darf daher auch nur zum Reinigen von Haushaltsgeschirr eingesetzt werden. Es dürfen nur ausdrücklich für Spülmaschinen geeignete Reinigungsmittel, Klarspüler und sonstige Zusätze verwendet werden. Der Hersteller haftet nicht bei Schäden, die durch falschen Gebrauch oder unsachgemäßen Transport entstehen. Die Einsatzzeit Ihres Gerätes beträgt 10 Jahre.
3 Installation/Aufstellung Lassen Sie Ihr Gerät vom autorisierten Kundendienst in Ihrer Nähe installieren. Wenn Sie Ihr Gerät betriebsbereit machen, achten Sie darauf, dass sich Wasserzulauf und Wasserablauf in einwandfreiem Zustand befinden, ehe Sie sich an den Kundendienst wenden. Falls dies nicht der Fall sein sollte, lassen Sie die nötigen Arbeiten durch einen qualifizierten Klempner und/oder Techniker ausführen.
installieren Sie zusätzlich einen Filter, damit keine Fremdkörper in das Gerät eindringen können. 1009 ● A Nach dem Anschluss öffnen Sie die Wasserzufuhr vollständig und prüfen auf Undichtigkeiten. Schließen Sie den Wasserzulauf aus Sicherheitsgründen nach jedem Einsatz des Gerätes. Wasserablauf anschließen 8 DE ��� �� �� �� � �� �� �� �� ������� �� ��������� �� ���� ���������� ��� Der Wasserablaufschlauch kann direkt an den Ablauf in der Wand oder am Spülbecken angeschlossen werden.
Wasserablaufschläuche mit einer Länge von mehr als 4 m können zu Verschmutzungen führen. Achten Sie darauf, dass der Wasserablaufschlauch auf dem Weg zum Ablauf nicht geknickt oder stark gebogen wird. Fixieren Sie den Wasserablaufschlauch so am Ablauf, dass er sich im laufenden Betrieb des Gerätes keinesfalls lösen kann. C Der Wasserablauf sollte direkt in die Kanalisation führen; das Abwasser darf nicht in das Oberflächen- oder Grundwasser gelangen.
● B B Schließen Sie das Gerät nicht über Verlängerungskabel oder Mehrfachsteckdosen an. Beschädigte Netzkabel müssen durch den autorisierten Kundendienst ersetzt werden. Bei Fehlfunktionen darf das Gerät erst dann wieder in Betrieb genommen werden, nachdem es durch den autorisierten Kundendienst repariert wurde! Es besteht Stromschlaggefahr! eine ordnungsgemäße, getrennte Entsorgung der Materialien. Entsorgen Sie das Verpackungsmaterial nicht mit dem normalen Hausmüll.
4 Vorspülen Tipps zum Energiesparen mit dem mitgelieferten Teststreifen; halten Sie sich dabei an die entsprechenden Anweisungen. Anschließend stellen Sie das System auf die ermittelte Wasserhärte ein. Wenn Sie die folgenden Hinweise beachten, können Sie Ihr Gerät besonders ökologisch und Energie sparend einsetzen. • Wischen Sie grobe Speisereste vom Geschirr ab, ehe Sie es in den Geschirrspüler geben. • Starten Sie das Gerät erst, wenn es komplett gefüllt ist.
Salz hinzugeben Das Wasserenthärtungssystem muss von Zeit zu Zeit regeneriert werden, damit die Reinigungsleistung des Gerätes nicht nachlässt. Dazu wird spezielles Salz für Geschirrspüler benötigt. C Verwenden Sie ausschließlich spezielles Salz zur GeschirrspülerWasserenthärtung in Ihrem Gerät. C Wir empfehlen Wasserenthärtungssalz in Granulat- oder Pulverform.
5. Lassen Sie das Gerät anschließend einmal leer arbeiten (kürzestes Programm); so löst sich das Salz schneller auf, außerdem werden Salzreste aus dem Gerät entfernt. C Je nach Partikelgröße der unterschiedlichen Salze, die es auf dem Markt gibt, Wasserhärte und sonstigen Eigenschaften des Salzes kann es einige Stunden dauern, bis sich das Salz komplett im Wasser gelöst hat. Daher kann es vorkommen, dass die Salzanzeige nach dem Einfüllen des Salzes noch ein Weilchen leuchtet.
C Falls das Geschirr schon etwas länger schmutzig herumstand, Speisereste bereits angetrocknet sind, füllen Sie das 5 cm³-Fach ebenfalls mit Spülmittel (5). 3. Schließen Sie den Spülmittelbehälter mit leichtem Druck. Der Deckel rastet ein, wenn er richtig geschlossen ist. C Bei Programmen mit Vorreinigung und hoher Temperatur achten Sie insbesondere bei TabSpülmitteln darauf, dass der Deckel des Spülmittelbehälters fest � ist.
� Ihre örtliche Wasserversorgung ein. 4. Passen Sie die Klarspülerdosierung entsprechend an. C Je nach Modell sollten Sie die Salz- und/oder Klarspüleranzeige unbedingt wieder einschalten, falls diese zuvor ausgeschaltet wurde. Klarspüler C Der Klarspüler, der in Geschirrspülern verwendet wird, besteht aus einer speziellen Kombination von Inhaltsstoffen, die das Trocknen des gespülten Geschirrs unterstützen und Wasser- oder Kalkflecken verhindern.
Gegenstände im Geschirrspüler. Solche Gegenstände können in Windeseile rosten und den Rost auf andere Gegenstände übertragen. • Reinigen Sie kein Besteck mit Holz- oder Horngriffen, keine verleimten Gegenstände und keine Dinge, die nicht hitzebeständig sind - dazu zählen auch Gegenstände aus Kupfer und verzinnte Artikel. C Das Dekor von Porzellan sowie Gegenstände aus Aluminium und Silber können sich – wie bei der Reinigung von Hand – auch bei der Reinigung im Geschirrspüler verfärben oder anlaufen.
Beispiele zu alternativen Korb-Platzierungen Falsche Platzierung Unterer Korb Oberer Korb 17 DE
Besteckkorb (je nach Modell) Im Besteckkorb reinigen Sie Besteck wie Messer, Gabeln, Löffel besonders gründlich. Einklappbare Geschirrhalter am unteren Korb (2-teilig) (je nach Modell) Mit dem einklappbaren Geschirrhalter am unteren Korb lässt sich größeres Geschirr (z. B. Pfannen, Schüsseln etc.) in vielen Fällen deutlich einfacher platzieren (1, 2). � 1029_redaksiyon 1018 � � Sie können mehr Platz schaffen, indem Sie die Halterungen einzeln oder alle auf einmal umklappen.
Höhe des leeren oberen Korbes anpassen (je nach Modell) Sie können die Höhe des oberen Korbes je nach Platzbedarf des Geschirrs anpassen. Die Höhe stellen Sie mit den Rollen ein. 1. Drehen Sie die Stopper an den Enden der Korbschienen zur Seite (A). 2. Ziehen Sie den Korb heraus (B). 3. Setzen Sie ein anderes Rollenpaar in die Schienen, schieben Sie den Korb wieder ganz hinein, schließen Sie die Stopper (C).
Höhe des beladenen oberen Korbes anpassen (je nach Modell) Der Verstellmechanismus am oberen Korb sorgt bei Bedarf für mehr Platz im oberen und unteren Bereich des Gerätes: Sie können den beladenen Korb nach oben und unten verstellen, ohne den Korb zuvor aus dem Gerät nehmen zu müssen. So heben Sie den Korb an: 1. Heben Sie eines der oberen Korbgitter (links oder rechts) an (A). So senken Sie den Korb ab: 1. Zum Absenken des Korbes (B) drücken Sie den Hebel am Verstellmechanismus (links oder rechts). 2.
5 Programmauswahl und Bedienung � � � � 1. 2. 3. 4. Ein/Aus-Taste Start/Pause/Abbrechen-Taste Display Programmauswahltaste � 5. 6. 7. � �� � 8. 9. 10. 11. 12. 13. �� � �� � � � Halbe-Beladung/Tab-SpülmittelTaste Verzögerter-Start-Taste Griff �� �� � �� Programmanzeige Salz-Anzeige Klarspüler-Anzeige Restzeit-/Verzögerungszeitanzeige Start-Anzeige Verzögerter-Start-Anzeige 14. Halbe-Beladung/Tab-SpülmittelAnzeige 15.
Tasten und Tastenbeschreibungen Ein/Aus-Taste (1) Wenn Sie die Ein/Aus-Taste betätigen, schaltet sich das Gerät mit dem zuletzt genutzten Programm ein. Beim Ausschalten des Geschirrspülers wird das Display abgedunkelt. Falls die Funktion Halbe Beladung (5) beim letzten Programm aktiv war, bleibt diese Funktion auch beim Ausund Wiedereinschalten des Gerätes aktiv. Wenn Sie Funktionen nach dem Wiedereinschalten des Gerätes abschalten möchten, drücken Sie dazu die entsprechenden Tasten. (3).
Zum Einsatz der Tab-Spülmittel-Funktion schalten Sie die Maschine zunächst mit der Ein-/Austaste ein. Wählen Sie das gewünschte Programm, drücken Sie anschließend die Halbe-Beladung/TabSpülmittel-Taste, bis die Tab-SpülmittelAnzeige aufleuchtet. Drücken Sie nun die Start-/Abbrechen-Taste, schließen Sie die Gerätetür.
b) Trocknen (15 b) c) Programmende (15 c) Während das ausgewählte Programm ausgeführt wird, zeigt das Gerät die Programmschritte Spülen 15 a und Trocknen 15 b an. Die ProgrammendeAnzeige 15 c leuchtet erst nach Abschluss des Spülprogramms auf. In der Restzeitanzeige (3) wird „0:00“ angezeigt. Programm abbrechen Sie unterbrechen ein laufendes Programm, indem Sie die Start/Pause/ Abbrechen-Taste (2) drei Sekunden lang gedrückt halten. Lassen Sie die Taste los, wenn das Symbol (12) im Display blinkt.
Salzmangelanzeige Stromtarif nutzen können. Wenn Sie das Programm oder Funktionen ändern möchten, wenn die Verzögerter-Start-Funktion bereits aktiv ist, halten Sie das Gerät zunächst mit der Start/Pause/Abbrechen-Taste (2) an. Der Countdown wird gestoppt. Die Verzögerter-Start-Anzeige beginnt zu blinken. Wählen Sie ein neues Programm und/oder wählen Sie Zusatzfunktionen gemäß der Tabelle „Programmauswahl und durchschnittliche Verbrauchswerte“ aus.
· · Sekunden lang gedrückt. Die Klarspülermangelanzeige (10) leuchtet auf, der Betriebszustand der Klarspülermangelanzeige wird im Display angezeigt: „ON“ (EIN) oder „OFF“ (AUS). Mit der Start/Pause/AbbrechenTaste (2) können Sie den Betriebszustand zwischen „ON“ (EIN) und „OFF“ (AUS) umschalten. Wenn Sie „ON“ (EIN) auswählen, leuchtet die Klarspülermangelanzeige auf, wenn das Gerät im Betrieb feststellt, dass sich nur noch wenig Klarspüler im Behälter befindet.
27 DE Mini 30' 35°C Vorspülen - Reinigen ▼ Kaltspülen ▼ Klarspülen ▼ Ende 30 10 0,70 15 4 - Programmdauer (min) Wasserverbrauch (I) Stromverbrauch (kWh) Wenig Vorspülen ▼ Ende - A 60°C 0,83 9 194 Vorspülen ▼ Reinigen ▼ Kaltspülen ▼ Klarspülen ▼ Trocknen ▼ Ende A+B Mittel 1,12 9,6 58 Reinigen ▼ Kaltspülen ▼ Klarspülen ▼ Trocknen ▼ Ende A+B Mittel 1,2 15,2 143 Vorspülen ▼ Reinigen ▼ Kaltspülen ▼ Klarspülen ▼ Trocknen ▼ Ende A+B Viel Für stark verschmutztes Geschirr, für Töpf
6 Reinigung und Pflege Bei regelmäßiger Reinigung hält Ihr Gerät länger; auch kommt es seltener zu störenden Problemen. A Ziehen Sie den Netzstecker und drehen Sie das Wasser ab, bevor Sie mit der Reinigung beginnen. C Verwenden Sie zur Reinigung keinerlei Scheuermittel. C Reinigen Sie Sprüharme und Filter mindestens einmal pro Woche. vorhanden sind, nehmen Sie die Filter heraus und reinigen diese gründlich unter fließendem Wasser. 1.
3. Drücken Sie die beiden Sperren am Grobfilter nach innen, lösen Sie den Grobfilter von der Baugruppe (C). 1. Drehen Sie das Wasser ab, lösen Sie den Schlauch. 2. Nehmen Sie den Filter heraus, reinigen Sie ihn anschließend unter fließendem Wasser. 3. Setzen Sie den gereinigten Filter wieder wie zuvor in den Schlauch ein. � � � � � 4. Reinigen Sie alle drei Filter mit einer Bürste unter fließendem Wasser. 5. Setzen Sie den Metall-/ Kunststofffilter wieder ein. 6.
Sprüharme reinigen Damit Ihr Gerät stets einwandfrei arbeiten kann, sollten Sie die Sprüharme mindestens einmal pro Woche reinigen. Unterer Sprüharm Vergewissern Sie sich, dass die Öffnungen im unteren Sprüharm (1) nicht verstopft sind. Falls diese verstopft sind, nehmen Sie den Sprüharm heraus und reinigen ihn gründlich. Zum Abnehmen ziehen Sie den unteren Sprüharm nach oben (A, B). Oberer Sprüharm Vergewissern Sie sich, dass die Öffnungen im oberen Sprüharm (2) nicht verstopft sind.
7 Problemlösung Das Gerät arbeitet nicht. • Der Netzstecker ist nicht eingesteckt. >>> Prüfen Sie nach, ob der Netzstecker eingesteckt ist. • Die Sicherung ist durchgebrannt. >>> Überprüfen Sie Ihre Haussicherungen. • Das Wasser ist abgestellt. >>> Überzeugen Sie sich davon, dass der Wasserzulauf geöffnet ist. • Die Gerätetür ist offen. >>> Vergewissern Sie sich, dass die Tür des Geschirrspülers geschlossen ist. • Die Ein-/Austaste wurde nicht gedrückt.
Das Geschirr wird nicht richtig trocken. • Das Geschirr wurde nicht richtig im Gerät platziert. >>> Platzieren Sie das Geschirr so, dass sich kein Wasser darauf sammeln kann. • Zu wenig Klarspüler. >>> Prüfen Sie die Klarspüler-Anzeige, geben Sie bei Bedarf Klarspüler hinzu. Erhöhen Sie die Klarspülermenge. • Das Geschirr wurde sofort nach Programmschluss aus dem Gerät genommen. >>> Lassen Sie das Geschirr nach Abschluss des Spülprogramms noch eine Weile im Geschirrspüler.
Kalkflecken bleiben am Geschirr zurück, Gläser werden milchig • Zu wenig Klarspüler. >>> Prüfen Sie die Klarspüler-Anzeige, geben Sie bei Bedarf Klarspüler hinzu. Erhöhen Sie die Klarspülermenge. • Wasserhärteeinstellung zu gering oder zu wenig Salz >>>Ermitteln Sie die Wasserhärte Ihrer Wasserversorgung, prüfen Sie die Wasserhärteeinstellung. • Salz tritt aus. >>> Sorgen Sie dafür, dass beim Einfüllen kein Salz verschüttet wird.
Das Geschirr zeigt Rostflecken, Verfärbungen oder Veränderungen der Oberflächen • Salz tritt aus. >>> Salz kann metallische Oberflächen oxidieren und somit angreifen. Sorgen Sie dafür, dass beim Einfüllen kein Salz verschüttet wird. Achten Sie darauf, dass der Deckel des Salzbehälters nach dem Befüllen fest geschlossen wird. Entfernen Sie versehentlich verschüttetes Salz, indem Sie das Vorspülen-Programm durchlaufen lassen.
Spülmittelrückstände im Spülmittelbehälter. • Der Spülmittelbehälter war beim Einfüllen des Spülmittels nicht vollständig trocken. >>> Achten Sie darauf, dass der Spülmittelbehälter komplett trocken ist, bevor Sie Geschirrspülmittel einfüllen. • Spülmittel wurde lange Zeit vor dem Spülgang eingefüllt. >>> Geben Sie Spülmittel erst kurz vor Programmstart in den Behälter. • Der Deckel des Spülmittelbehälters konnte sich beim Spülen nicht öffnen.
Bei Gläsern bleibt ein milchiger Belag zurück, der sich nicht abwischen lässt. Gläser zeigen bläuliche oder schillernde Verfärbungen, wenn man sie gegen das Licht hält. • Zu viel Klarspüler. >>>Vermindern Sie die Klarspülerdosierung. Wischen Sie beim Einfüllen verschütteten Klarspüler auf. • Bei weichem Wasser traten Beschädigungen an Gläsern auf. >>> Ermitteln Sie die Wasserhärte Ihrer Wasserversorgung, prüfen Sie die Wasserhärteeinstellung.
DE 17 9227 02 00_AU_sTM