Vented Sensor Dryer DVSC711W
Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will • Help you use your machine in a fast and safe way. • Read the User Manual before installing and starting your product.
TABLE OF CONTENTS 1 Your Dryer Progress of programme......................18 Changing the programme after it has started................................................19 Adding/removing laundry in standby mode..................................................19 Child-proof lock..................................19 Finishing by canceling the programme.20 End of programme.............................20 4 Overview....................................... 4 2 Important safety information 6 General safety......
1 Your Dryer Overview 5 1 2 3 4 1- Rating label 4- Adjustable Feet 2- Control Panel 5- Power Cord 3- Fluff filter 4 EN
Technical Specifications EN 2 Height (adjustable) 85.0 cm Width 59.5 cm Depth 54 cm Capacity (max.) 7 kg Weight (net) 31 kg Voltage Rated power input See rating label Model code Type label is located behind the loading door. Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.
2 Important safety instructions This section includes safety information that will help protection from risks of personal injuries or damages. Failure to follow these instructions shall cause any warranty to become void. General safety • Never place the machine on a carpetcovered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.
drum is spinning. • Unplug the machine when it is not in use. • Never wash down the appliance with water! There is the risk of electric shock! Always disconnect by unplugging from the mains before cleaning. • Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out by grabbing the plug only. Do not operate the machine if the power cable or plug is damaged! • Never attempt to repair the machine yourself, otherwise, you will be putting your life and others’ lives in danger.
3 Installation be minimum 10 cm. Maximum hose and pipe lengths are given in the table below. Hose Pipe Maximum length 4m 5m 1 elbow 45° -1.0 m -0.3 m 1 elbow 90° -1.8 m -0.6 m 1 elbow 90° short -2.7 m Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’s responsibility. B Installation and electrical connections must be carried out by a qualified personnel.
or gas stove. Airflow may cause the chimney to flare up. Adjusting feet In order to ensure that your product operates more silently and vibrationfree, it must stand level and balanced on its feet. Front feet of your product can be adjusted. Balance the machine by adjusting the feet. Disposing of packaging material Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children.
4 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability. For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.
5 İnitial Preparations For Drying Things to be done for energy saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased. • Pay attention to dry same types of laundry together. • Follow the instructions in the user manual for programme selection.
dryer. • Items cleaned or washed with gasoil/ fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor. • Do not dry items cleaned with industrial chemicals in the dryer. • Do not dry your unwashed laundry in the dryer.
Following weights are given as examples. Home articles Approximate weights (g) Cotton quit covers (double) Cotton quit covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Small tablecloths Tea napkins Bath towels Hand towels 1500 1000 500 350 700 250 100 700 350 Approximate Garments weights (g) Blouses 150 Cotton shirts 300 Shirts 200 Cotton dresses 500 Dresses 350 Jeans 700 Handkerchiefs (10 pieces) 100 T-Shirts 125 Loading • Open the loading door.
6 Selecting a Programme and Operating Your Machine Control panel 1 2 3 4 6 5 1. Filter cleaning warning light Warning light turns on when the filter is full. 2. Programme follow-up indicator Used to follow-up the progress of the current programme. 3. Cancel audio warning Used to cancel the audio warning given at the end of the programme. 4. On/Off button Used to turn on and off the machine. 5. Programme selection knob Used to select a programme. 6.
Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Off” button. C Pressing the “On/Off” button does not necessarily mean that the programme has started. Press "Start/Pause/ Cancel" button of the machine to start the programme. Programme selection Decide the appropriate programme from the table below which includes drying temperatures in degrees. Select the desired programme with the programme selection button.
•Freshen up Only ventilation is performed for 10 minutes without blowing hot air. You can air your clothes that have been kept at closed environments for a long time thanks to this programme to deodorize unpleasant odors. •Timer programs You can select one of the 10 min., 20 min., 40 min. and 60 min. timer programmes to achieve the desired final drying level at low temperatures. Programme dries at the selected time regardless of the drying temperature.
Programme selection and consumption table EN Programmes 2 Capacity (kg) Washing machine spin speed (rpm) Approximate amount of remaining humidity Drying time (minutes) 1200-1000 900-800 1200-1000 60% 70% 60% 140 150 75 Cottons / Coloreds 7 A Cupboard Dry 3.5 7 A Ready to Wear B Ready to Iron 3.5 7 3.5 900-800 70% 90 1200-1000 900-800 1200-1000 900-800 1200-1000 900-800 1200-1000 900-800 60% 70% 60% 70% 60% 70% 60% 70% 150 160 85 100 100 115 60 75 Rapid Dry 1,2 kg 1.
Auxiliary function Cancel audio warning Your dryer will give an audio warning when the programme comes to an end. If you do not want to hear the audio warning, press “Cancel Audio Warning” button. The relevant light will turn on when this button is pressed and an audio warning will not be given when the programme comes to an end. C You can select this function either before or after the programme starts. Warning indicators C Warning indicators may differ according to the model of your dryer.
Adding/removing laundry in standby mode In order to add or remove laundry after the programme starts: 1. Press the “Start/Pause/Cancel” button to switch the dryer to “Pause” mode. Drying process will stop. 2. Open the door at “Pause” position and close it again after adding or taking out laundry. 3. Press “Start/Pause/Cancel” button to start the programme.
End of programme The “End/Anti-creasing”, “Filter cleaning” and “Water tank” warning lights on the programme follow up indicator will turn on when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle. Press “On/Off” button to turn off the dryer. CFinal step of the drying cycle (cooling step) is performed without heat application in order to keep the items at a temperature that would not harm them.
7 Quick instructions for daily use Preparation and starting 1. Press the “On/Off” button. 2. Place the laundry in the machine. 3. Select the programme. 4. Close the loading door. 5. Press “Start/Pause/Cancel” button. Cancelling a programme A new programme can be selected and started after “Programme cancel” is activated in order to change the drying programme. In order to cancel the selected programme, press “Start/Pause/Cancel” button for about 3 seconds.
8 Maintenance and cleaning Fluff filter Sensor (models equipped with a sensor) Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Fluff Filter”. There are humidity sensors in your machine that detect whether the laundry is dry or not. For sensor cleaning; C Such fibre and lint are generally formed during wearing and washing. C Always clean the filter after each Drying process. C You can clean the filter and filter area by vacuum cleaner.
9 Solution suggestions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry come out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not overload the machine. Machine does not switch on or the programme does not start. Machine is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in. • The loading door may be ajar.
10 Door Reversal 1. Unplug the dryer. 2. Open the door. 3. Turn the contact pin in the upper part of door by 90° in the anti-clockwise direction and remove it. 4. Unscrew the 2 screws of each door hinge and remove the door. 5. Removing the door lock: Using a flat screwdriver release the snap-fitted door lock. 6. Remove 2 plugs for the hinges and one for the door-lock on the opposite side. 7. Insert the door lock system on the opposite side of the hinge and be sure it is properly fitted. 8.
11 Guarantee Important notes Your new product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect. • The cost of functional replacement parts, but excluding consumable items. • The labour costs of a approved repairer to carry out the repair. What is not covered? • Transit, delivery or accidental damage or misuse and abuse.
12 Service Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. You should also complete the details below; it will help us assist you when requesting service.
EN