INTEGRATED DIGITAL FULL HD COLOUR TELEVISIONS 37WLU550FHID Operation Instructions
TABLE OF CONTENTS 1 2 3 4 5 6 7 8 9 10 11 1-Important Information................................................................1 1.1-Cleaning the screen and cabinet........................................................... 1 1.2-Disposing of your TV at the end of service life....................................... 1 1.3-Superior features of your integrated digital television............................. 1 1.4-Receiving digital broadcasting channels................................................
1 Important Information LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage. 1.2-Disposing of your TV at the end of service life...
1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriatte wiring information below for your particular cable.
2 Features of your new television We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, please read this entire manual carefully before you use your TV and keep it in a safe place for future reference. 2.1-Special Features • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Full HD HDCP feature MHEG 1.
3 Important Safety Instructions This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV. 1) Please READ the operating instructions before using the TV for the first time. 2) Please observe the instructions contained in the Operating Instructions. 3) Please consider all warnings.
10) Never operate your TV close to water. Operating your TV, for example, near a bathtub, washbasin, kitchen washbasin, washing basin, wet basement and swimming pool can cause fire or electric shock. 13) Make sure that the power cable is not stepped on and that there is no bending at the plug sections, plug heads and TV output point. • Do not allow your TV to get wet. Never pour any liquids onto the TV. Do not operate your TV if any solid or liquid substance enters into it.
18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC power cable from the socket when cleaning the TV. Otherwise, there is the risk of electric shock.
4 Start Remove your television carefully from its box. You can keep the packaging of your television to use in future. Not 1: Your TV will switch to the STANDBY mode in five minutes if there is no broadcast signal from the aerial. Note 2: Your TV is equipped to operate with TV buttons in case your remote is broken or the batteries are exhausted. 3. To power on your television, press any numerical key or PR+ or PR- keys on the remote control. For this process, you can also use the buttons on your TV.
5 Your new television 5.1-TV Control Panel Program Down/Up button or or or or or Stand by indicator Menu button / Source selection button or or On-Off / Standby button Volume Level Down/Up button Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power Cable is not connected. 5.
5.
6 Performing the initial power-on settings 6.1.5-Temporary sound mute (MUTE) 6.1-TV controls 6.1.1-Temporary on/off (STAND-BY) To temporarily mute the sound of your television, press the MUTE button on your remote control. In that case, MUTE symbol will appear on the screen. When you press the same button a second time, the sound will be restored. If you press the VOL+ button while in the Mute mode, the sound level is increased and the Mute function is aborted.
6.2-Turning on the TV and Setting the Channels SETUP AUTO TUNING MANUEL TUNING FIRST TIME INSTALLATION When you turn on your television for the first time, FIRST TIME INSTALLATION CHECK AERIAL CABLE IS CONNECTED. PRESS OK KEY TO CONTINUE message is displayed. If the antenna connections are correct, press OK button to continue. COUNTRY SELECTION menu will be displayed. Select the country by using Up/ Down, Left/Rightmovement buttons and press OK button to start the auto programming.
Highlight the Channel tab by means of Up/Down buttons and directly enter the frequency number of the channel you want to search, if you know, by using the numeric keys on the remote control. If you don’t know the frequency number, you can scan frequencies by using the Left/Right movement buttons.
6.3.4.2-Creating favorite channels list 6.3.4-Program Table With the program table, you can see the stored channels in a list, switch between TV channels and Radio channels or create your favorite channels list for 6 TV and Radio channels according to your preference. Select the PROGRAM TABLE item from the main menu by means of Up/Down movement buttons to access program table and press OK button to confirm. Program Table will be displayed.
You can select the channel by using the Up/Down movement buttons and navigate through the program data with Right movement button. To get further information about the program press INFO button and detailed information about the selected program will be displayed. Press the GREEN button to display next day’s program information, press the RED button to display previous day’s program information and press OK button to add Reminder to any program.
Note 2: The password for both of these features has been set as 0000 at the factory. You can change the password as you wish under Change PIN item in the Access Control menu. desire by means of the Program Table. Press AV button on your remote control, select ANALOG TV tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Your TV will switch to Analog mode. Press the MENU button on your remote control.
AUTOPROGRAM SEARCHING 6.4.2.2-If you do not know the channel number % 20 STOP To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete. 6.4.2-Manual tuning of channels and storing in the memory 6.4.2.1-If you already know the channel number Press the MENU button.
6.4.4-Program Table After setting is complete, press the EXIT button to exit the menu. Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed. 6.4.4.3-Skipping a stored channel In the event that you do not wish to see certain programs while navigating through the channels using the PR+/PR- buttons, then you can use this function.
7 Settings of Your New Television 7.1- Sound Menu Settings 7.1.4-AVL (Automatic Volume Limiting) You may perform volume settings by using the VOL+ or VOL- buttons on your television or the VOL+/VOLbuttons on your remote control. You can perform other Sound settings by entering the Sound menu. For this, press the MENU button on your remote control. Select SOUND by pressing the Up/Down movement buttons from the main menu and press the OK button. The Sound menu is displayed.
7.1.6.2-Dialog Clarity This feature enhances the understandability of the speeches in dialogues. Note:When the SRS is set to ON, AVL and EQUALIZER functions will automatically be set to Off. PICTURE BRIGHTNESS CONTRAST COLOUR SHARPNESS DNR COLOUR TEMP. MPEG NR ACTIVE CONTRAST BACKLIGHT 7.1.7-Equalizer Select the EQUALIZER tab in the Sound menu and confirm with the OK button. The Equalizer menu is displayed.
7.2.6-Backlight 7.2.9.1-Auto With this feature, you can adjust the intensity of light reflected to the LCD Panel. Select Backlight by pressing the Up/Down movement buttons and adjust the desired level by pressing the right/left movement buttons. Some movie channels may broadcast in the 16:9 format. If you would like to see this format automatically, then select AUTO. In that case, AUTO 16:9 appears on your screen.
7.2.9.6-Subtitle 7.3.1-Timer If the subtitles are transmitted in the “16:9 formatted” broadcast, then this setting will push the picture upwards in order to ensure the entire written text to be seen. Your television is equipped with the feature of being able to be turned off and on at periods that you specify. Select TIMER by pressing the Up/Down movement buttons and press the OK button in order to have your TV turned off at the end of a desired period. The Timer menu will be displayed. TIMER 7.2.9.
PIP screen when HDMI1 is displayed on the main screen. Note 3: Right and left movement buttons do not control the volume in PIP, PAP and PAT modes. They can only be used to change the source. 7.3.4-Auto Scart When this feature is set to On and when you operate an external device that is connected to your LCD television via scart, TV will automatically switch to AV mode where the device is connected. When it is set to Off, your TV does not switch to the external device automatically. 7.4.3.
8 Teletext To be able to receive a quality teletext broadcast, a good aerial system and a broadcast signal that is not weak, with no reflections and interference from other channels are required. Even in a very clear reception, it is normal for some characters or tabs to be lost. Such conditions will automatically be improved in a short time under normal circumstances. 8.3-Teletext image in the TV picture (MIX) With this feature, you can watch the teletext information and the TV broadcast together.
8.7-Temporary TV Picture (UPDATE) 8.9-Clock The Clock function of the SIZE button; press the SIZE button when you want to check the time while watching any television channel. In that case, a clock will appear for a few seconds on the lower right corner of the screen. This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search.
9 External Equipment Connections: Your TV is equipped with 10 inputs including aerial input, which allows for the external device connection. These inputs are: 1-Aerial input 2-SCART1 input 3-SCART2 input 4-AV input 5-S-Video input 6-PC input 7-HDMI1 input 8-HDMI2 input 9-YPbPr Component input 10-CI input You can connect your external device to your TV via these inputs. By pressing the AV button on your remote control, select the external source input to which you connected your device. 9.
9.3-Connecting external equipment via AV connection Side view of TV CAMERA DECODER DVD AV : To watch the picture of the broadcast SATELLITE RECEIVER device connected using the Phono input, select AV option from the Source menu and press OK button. Your TV will switch to the selected source. GAME CONSOLE 9.
9.6-Connecting an external equipment via HDMI connection DVD Side view of TV SATELLITE RECEIVER GAME CONSOLE HDMI: When a connection is made via HDMI socket, select the HDMI input you connected through from the Source menu and press the OK button to be able to display these pictures. Your TV will switch to the selected source.
9.7-PC VGA connection Picture connection Sound connection Rear view of TV 9.7.1-PC Connection: Connect the D-Sub15 connector to the PC-IN socket at the back of your television by using an appropriate cable (not supplied with your television). Again, by using an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at the back of your television to listen to sounds from your PC and you can adjust the volume level of your source by using VOL+/VOL- buttons. 9.7.
Side or Rear view of TV 9.8- How To Connect CI (Common Interface) Card 1- To wiew the scrambled (pay) services in digital TV mode. TO INSERT A CI CARD (NOTE: The card on its own cannot be used on this tv. A cam must be purchased and a the card is inserted into the cam. The cam / card holder is then inserted into the ci slot on the tv.) Insert the Cam / card holder card into the slot in the direction of the arrow until it fully located.
10 Help and tips Failure The television does not function Poor picture quality (analogue TV) Shadow and reflection in the picture.(analogue TV) No picture Possible cause Solution Is the power cord connected to the mains supply? Check the power cord. Is the On/Off button on? Check if the On/Off button is on. Is the aerial cable connected? Check the aerial cable. Aerial may be affected by two connected external devices. Try disconnecting one of the devices. It may need fine tuning.
11 Technical specifications chart SCREEN SIZE Panel type Sound output 37” 37”, 16:9 Active matrix TFT 2 x 10 W Power consumption 180 W Stand by power value <1 W Teletext page Loudspeaker impedance: 250 8 Ohm Scart 1 STD Scart 2 STD Audio/Video PHONO(Input) STD S-Video socket STD YUV (Video/Sound) Component Input STD HDMI 1 STD HDMI 2 STD VGA Input STD PC Audio Input STD SPDIF Digital sound output STD Headphone socket Dimensions (WxDxH) Weight (Kg) STD 930x251x671 19,6 STD: Stan
12 MAIN UK TRANSMITTER STATIONS Regional Main stations North West Caldbeck Winter Hill Douglas (IOM) North Belmont Emley Moor North East Bilsdale West Moor Chalton Pontop Pike Midlands (West) Ridge Hill Sutton Coldfield The Wreckin Mindlands (East) Waltham South West Beacon Hill Caradon Hill Huntshaw Cross Redruth Stockland Hill Channel Islands Fremont Point West Mendip South Hannington Midhurst Rowbridge UHF CHANNELS BBCI BBC2 ITV CH4 CH5 30 55 68 34 62 66 28 59 48 32 65 56 56 48 56 12 15 45 22
13 Guarantee - Television Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials,defective components or manufacturing detect. • The cost of all functional replacement parts,excluding remote control batteries • The labour costs of a Beko approved repairer to carry out the repair • You may be offered a replacement instead of repair under guarantee.
13 HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality stadards to give you many years of use.To get the best out of it,please take a few moments to read the instruction book. Your television is supplied with a full 12 months guarantee,covering parts and labour.
V7P.
