Electric Range User manual IMPORTANT Installer should leave these instructions with appliance. Consumer should read these instructions before using the appliance and should retain them for future reference.
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS WARNING: Read all safety Instructions before using the product.
TG PREVENT TIPPING: If the information in this manual is not followed exactly, a fire or explosion may result causing properly damage, personal injury of death. WARNING: "A child or adult can tip the range and be killed. Install the anti-tip device packed with range to the structure floor.” “Engage the range 10 the anti-tip device hy sliding range so that rear foot of the range slides in to the bracket as Shawn in figures.
Explanation of symbols Throughout this User Manual the following symbols are used [Doreen information or useful hints about usage. wring for hazardous situations with regard to life and properly. a Warning for electric shock. Bsn for risk of fire. A Warning for hot surfaces, DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
ZA Please read these instructions before installation or using your appliance! Dear Customer, We would like you to obtain best performance with your product that has been manufactured in modern facilities and passed through strict quality control procedures. Therefore, we advise you to read through this user manual carefully before using your product and keep it for future reference.
Safety Instructions Read before use Basic safety instructions .. Safety for children... Safety when working with el Intended use Disposal. Packaging material Future transportation Installation 18 Installation and connection... Connection to the main supply E Preparation 26 Rigs for saving energy First leaning of the appliance Ini REHANG core E How to use the hob 28 General information about cooking 26 6 26 Using the perambulates 3 Using the hobs. 31 Turning on the COOKING 20N8S c.
satiety instruction DN Basic safety instructions « This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction conceding use of appliance by a person responsible for their safety. «Children should be supervised to ensure that they do not play with the appliance.
BEN A WARNING: Utensil handles should be turned inward and not extend over adjacent surface units to reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units. The appliance is not intended to be operated by means of an textual timer or separate cremate-control system. A WARNING: Accessible parts may become hot during use.
hotter than with standard use, Keep children away. £\ WARNING: Metallic objects such as knives, forks, spoons and lids should net be placed on the hob surface since they can get hot. AN CAUTION: Only use the temperature probe recommended for this oven. ZI CAUTION: Use cave when opening door let hot air or steam escape before removing or replacing food. A CAUTION: Placement of oven racks -always place oven racks in desired location while ovarian cool.
» AN CAUTION: if a wet spangle or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, Some cleaners can produce noxious fumes if applied to a hot surface. Utensil handles should be turned inward and not extend over adjacent surface units.
De not use the oven fora storage area. Items stored in an oven can ignite. A WARNING: Storage in or on Appliance Flammable materials should not be stored in an oven or near surface units. ZN WARNING: Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors. A WARNING: Do nat use water on grease fires. Never pick up a flaming pan. Turn the controls off.
« fear surface of the oven gets hot when it is in use. Electric connection should not touch the rear surface, otherwise the main cable may get damaged. Do rot trap the main cable between the hot oven door and frame. Do not route the main cable over the hot cooking section. Otherwise, cable insulation may melt and cause fire as a result of short circuit, o£ WARNING: Use this appliance for its intended purpose as described in this owner's manual.
use. Electric connection should nat touch the rear surface, otherwise the mains cable may get damaged. Do not trap the mains cable between the hot vane door and frame. Do not route the mains cable over the hot cooking section. Otherwise, cable insulation may melt and cause fire as a result of short circuit. e Check all controls on the appliance are switched off after use. » [EJ IMPORTANT: Cal the authorized service for Installation of the appliance ta be used.
this appliance to satisfactorily meet the application needs must be made by a qualified technician. « Before performing any service, unplug the range or disconnect the power supply at the household distribution panel by removing the fuse or switching off the circuit breaker, + Ensure that the fuse rating is correct. « Do not operate the appliance barefooted. «Never touch the appliance with wet hands or feet. Intended use oD WARNING: Use this appliance only for its intended use as described n this manual.
NOTICE: [Jo not place other items on the top of the appliance. The appliance must be transported upright. Store the appliance’s original box and transport the appliance in its original carton.
installation The stagehand floor must be able to carry the weight of the appliance plus the additional weight of cookware and bake ware and food » {fan appliance hood is io befitted, refer to the manufacturer's instructions regarding fixing height. ® Any kitchen furniture next to the appliance must be heat-resistant min).
Clearances & Dimensions Dimensions that are shown in figure must be used. Given dimensions provide minimum clearance. There needs to be a 30-inch (782mm) minimum clearance between the top of the rebuking surface and the bosom of unprotected wood or metal cabinets or a 24-inch {£09 minimum when bottom of wood or metal cabinets are protected by not ess than a cinch Gn) flame retardant billboard covered with not less their no. 29 meg shes-stesl, (38mm stainless steel, 0.024 inch 0.6mm; main or & copper.
Anti-Tip stability device installation instructions 1. Fix the bracket 1 to the floor with 4 screws (5) in accordance with the dimensions and direction indicated in Picture 1. 2. Measure dimension A of the product indicated in Picture 2 according the height of counter, Decide the hole on bracket 1 10 which the PICTURE NUMBER} BRACKET 20/EN bracket 2 will be secured. Complete the installation by tightening parts and 4. 3. Position fhe appliance on iis place after completing the installation. 4.
How to move the appliance Movement of your appliance is mast easily achieved by lifting ihe front as indicated in the drawing. Open the oven door sufficiently to avow a comfortable and safe grip on the underside of the oven roof avoid causing any damage to the rail element or any internal parts of the oven. Do nat move by pulling on the door handle or knobs, Move the appliance a bit at a time until placed in tr red ARMING: Tip Over Hazard CA child or adult can tip the range and be dist.
fornicator to publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure ta such substances. “WARNING: This product can expose your fo chemicals including Nickel Metallic) which is known to the Slate of California to cause cancer.
This range must be electrically grounded in accordance with local codes, of in felt absence, with the National Electrical Cote EXPANSION No. 70-latest edition in United States. Installation should be made by a Licensed electrician. isk of electric shock, short circuit er fire by| damage of the main power supply! “The main power supply lead must not be clamped, bent or trapped or come info contact with hot parts of the appliance.
Loosen the screws on rear access cover and lake off the terminal block cover. After completing connections put terminal block cover fo the original location and tighten the SENS.
4-wire connection rr 2 Taming! black 2 Power nonconductor plate 4 Washer 4 Nut 5 Sou Connect Ltr comma, BK Black WH White AD Red GR Green 3-wire connection Ga ne Terminal block Power nonconductor plate Washer Net Sower 25/EN
El Preparation Tips for saving energy the cooking time. When you use the The following information will help you to use residual heat, you can save your appliance In an ecological way, and fo save | electricity. i} energy: First cleaning of the appliance » Use dark colored or enamel coated cookware in the oven since the heat transmission will be healer » While cooking your meals, perform a preheating operation if iris advised in the user manual or cooking instructions.
5. Operate ihe oven about 30 minutes. 6. Tum off your oven. Broil 1. Take all baking trays and the wire grill out of the oven, 2. Select the broil function, 3. Set ihe brill level to "H 3. Operate the broil about 30 minutes. 4, Turn off your oven, Shirker and syn all may emit for i couple of hours yardage tha initial aeration. This is quits animal. Ensure that the room is wed ventilated 10 teammate the smoke and slam. Avoid directly inhaling the snake and the smell that emits.
ANGER Risk of fire over by overheated oil! Hainan you heat of, to not leave it unattended “A WARNING D0 not use water on egress Ever dick yup a flaming pan. Tum thi controls off Maratha a faring pan an a surface unit by covering the pan completely with a well Fitting iid or a fire blanket, cookie shear or flat ray. Use a multi-purpose dry chemical ar foam type fire extinguisher. ARMING o not place oe store tiaras thi can melt or catch fre an the glass cook to, even when i is not zing used.
WARNING Glazed cooking utensils + only certain types of ‘glass, glass/ceramic, care, earthenware, or gather glazed utensils are suitable for range: wp service without breaking due to the sudden change In temperature. = For foods containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cook top to cool down slightly. Then, while wearing oven mitts, remove the spills while the surface is still warm.
vessels with non-magnetic aluminum bottom should not be used, Saucepan recognition-focusing system Ini induction cooking, only the area covered by the vessel on the relevant cooking zone is energized. The vessel's bottom is recognized by the system and only this area is heated automatically. Cooking spats if the cooking vessel is lifted from the cooking zen during cooking. Selected caning zone and “F symbol flashes alternately.
Using the perambulates wih broken gb ox our Shook, fire or cats may Do not let any objects fall onto the plate, Even small objects (8.0. salt shaker) may damage the burner/ plate. Turning off the cooking zones: The hob contra knob is turned from the locked “OFF position to switch a cooking zone on as wall as when the hab control knot is turned back to the OFF position to switch a cooking Zane off. 4% DANGER: 71ND vot ust glass su may ent into the circuit ce with cracks.
High Power {Booster} Booster is a function which facilitates cooking. All cooking zones indicated with *P* symbol in the Technical Specifications table are equipped with Booster function. Turning on High Power (Booster): 1. Push and tum the related hob control koh counter clockwise fo i 2. Tum the hob control knob in the left over wind position to activate High power (Booster “P” will appear on related cooking zone display, The nob will drop to level © after several minutes optional} automatically.
Turning off Quick Heating Function: The hob control knob is turned from the locked “Oi position to tum aff the Quick Heating function, Table: Quick Heating pe Times is a timer assigned to the cooking zone, the timer display will also turn off later. Operation time limit depends on the selected temperature level. Maximum operation time is applied at this temperature level.
fee) from overflowing even if it was just about to overflow Operating noisy Some noises may arise from he induction hob. These sounds are normal and a part of induction cooking. « Noise becomes prominent in high temperature levels. * Alloy of the saucepan can cause noise. ® In low levels, a regular on/off sound can be heard because of the operating principles » Noise can be heard if an employ saucepan is bested. When you put water or food in it, this sound will clear away.
B How to operate the oven General information on baking, roasting and 1d broiling A WARNING ¥ Hot surfaces cause bums! duct may be hot when iris 13, § putting in or removing dishes info/from the hol oven, CE DANGER: Be careful wham opening the oven door as steam may escape. Exiting steam van scald your hands, face landlord suss, Tips for baking Use non-sticky coated appropriate metal plates or aluminum vessels or heat-resistant silicone molds.
TO Function nol 2 Hemostat hook 1. Set the Function knot to the desired operating mode. 2. Set the Temperature knob to the desired temperature, » {ven heats up to the adjusted temperature and maintains it. During heating, signal lamp stays on. Switch off the electric oven 1. Turn the function and thermostat knobs to off {upper} position Cooking Functions Bake Only bottom heat is an. The bake mode can be user for a variety of food items, from cakes to casseroles.
The igh © When using the Broil mode, preheat the oven 56 minutes for best results. Turn foods once during the recommended cook time. The size, weight, thickness, starting temperature amid personal preference of oneness wil affect broiling times. Sabbath Only bottom heat is on. Cook food on a single rack with the pans are positioned In the middle of the oven.
Cooking times table 15f rok of the oven is the bottom rack. he timings in {his chart are meant as a ide, Timings may vary due fo temperature f food, thickness, tune and your own preference of cooking Baking and roasting Cooking re imbiber | Rack Fines pair Hoo. LB. J of Racks. | Position... min). I Sizes Type.
EET Fol oan iol er Lm bai said ae never beh ed ad How to operate the broil EARNING Hot surfaces may cause burns! Keep Switch off broil handrail away from the product, 1. Tum the function and thermostat knobs to off Close oven door during grilling. {upper position The broil is operated by the function and thee hemostat knob. In off position {op} the gas supply For equipment with a cooling fan is locked, The pooling fan cools the front of the products 2 Thermostat knob Swishing on Broil .
General information Service life of the product will extend and the possibility of problems will decrease If the rotund is cleaned at regular intervals. DANGER: \ Risk of electric shock! Switch off the electricity before cleaning appliance to avoid an electric shock, \: DANGER: ; Hot surfaces may cause burns! "Allow the appliance to cool down before vou clean it IMPORTANT: The surface might get damaged by some tee gents or cleaning malarial Do rot use aggressive detergents, caning preponderance of any sharp
Self-cleaning function WARNING: f the oven is hot.self cleaning mods ‘can not he operated until the oven is clad, If the self cleaning mod contradistinctions, turn hie oven off and disconnect the power supply, and call the service 1 Function knob 2 Thermostat knob +f 1X00 not clean the door gasket. wineglass gasket is highly sensitive and can get damaged easy.
Clean oven door To clean the oven door, uss warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth, ant use any harsh abrasive cleaners or sharp mural scrapers fur cleaning the oven Junior, They could pastorate the surface and Removing the oven door {oie EO fore 1 40 50 ing the road. Ale, do not ro clews on sharp a cannot fall over. Oven door can be removed in order to clean the inside of oven easy 1. Open the oven door completely. 2.
# your oven is equipped with a square lamp: The oven lights can be illuminated with lamp button. The Bights are switched on when the door is opened or when the oven is In a cooking cycle. The oven lights are not illuminated during self lean. Each light assembly consist of a removable lens, a fight bulb as well as a light socket housing that is fixed in place. Light bulb replacement is considered to he a routing maintenance item. The oven lights are not fulminated during self clean. 1.
[i General informs Overview 1 Splashy 5 Front door 2 Boilerplate [I 3 Control panel 7 Lower part 4 Handle 1 Cut lamp bunion 6 Thermostat kno 2 Induction cooking plate Hear Left 7 induction cooking plate Front Right 4 Induction cooking plate Front Left 8 Hear Eight Oven signal lamp 9 § Faction knoll A4/EN
Package contents AN WARNING: Pu the oven rack to the stop-sack passion en loading and unloading frail from the oven, This helps prevent bums from ouch hut surfaces of fs door and oven walls. AUCTION: When you are using a rack in fhe lowest position (4), you will need to use caution when] ruling the rack out. We recommend that you put the rack out several inches and then, : using two pot holders, pull is rack out by . Placing the wire shelf and tray onto the holding the sides of it.
operate. » The mains fuse is defective or has tripped, >> Check fuses in the fuse bax, If necessary, replace or reel thee. » Product is not plugged into the (grounded) socket. Check the plug connection. o Buttonsknabs/keys on the control panel do not function. >> Locke may be enabled. Please disable Jt (See. using the key lock. page Rx Oven lamp is defective. Replace oven lamp. Power 1s cul. Check if there is power. Check the fuses in the fuse box. If necessary, replace or reset the fuses.
Bl Removing the Package | [1 Anne 1 #ribbon 4 fie move nylon bag on the product. Remove Styrofoams of the front door, 2 J tipper Fame Ry Reese wne A: 18340 Wooden support Remove upper frame and rear and front MD's. Remove cut-out Styrofoams and bite tapes. Remove girl Styrofoam and shrink packaging.
Remove upper pet and blue tapes on it female blue tapes on the edges of cast grill. For Lade i Remove styrofaams on pet and the lower pet. + Remove 3 screws an each of the 4 L rackets. + Remove rear connection plate by removing 6 screws an the palette and 3 screws on the product and take the product out. its bottom after separating it from the palette. Place the product to the desired location.
