Automatic washing machine WMA 747 W WMA 747 S
Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference. This operation manual will… …help you use your machine in a fast and safe way. • Please read the Operation Manual before installing and starting your machine.
TABLE OF CONTENTS 1 Your Washing Machine 4 Overview Specifications 4 5 2 Warnings 6 General Safety First Use Intended use Safety instructions If there are children in your house... Electrical connection 6 6 6 6 7 7 3 Installation 9 Removing packaging reinforcement Opening the transportation locks Appropriate installation location Adjusting the feet Connecting to the water supply.
1 Your Washing Machine Overview Figure 1 1 3 2 5 6 4 1 Top Lid 4 Height-adjustable Feet 2 Detergent Drawer 5 Door 3 Control Panel 6 Filter Cap 4 EN
Specifications WMA 767 W WMA 767 S Maximum dry laundry capacity (kg) 7 7 Height (cm) 84 84 Width (cm) 60 60 Depth (cm) 59 59 Net Weight (kg) 73 73 Electricity (V/Hz.) 230 V / 50hz 230 V / 50hz Total Current (A) 10 10 Total Power (W) 2200 2200 Spinning cycle (rpm max.) 1600 1600 Models Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.
2 Warnings Press “Start/Pause/Cancel” button for 3 seconds to cancel the program set in your machine before calling the authorized service. Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. First Use General Safety • • • • • • • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below your machine may cause electrical parts to overheat.
• • • • • • • • always be securely fastened and remain in an undamaged state. Fit the draining hose to a washbasin or waste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water.
cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
3 Installation Removing packaging reinforcement 3. Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”) Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
to the tap and the elbowed end must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts. 2. Adjust them until the machine stands level and firm. 3. Important: Tighten all lock nuts up again. Connecting to the water supply. Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa).
• • secured in all types of connections. Your house may be flooded if the hose falls out of its housing during water discharging. The hose should be attached to a height of at least 40 cm, and 100 cm at most. In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet. Therefore, the heights described in the figure should be followed.
4 Initial preparations for washing Sorting the laundry • • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. • • Washing water Wash with Non machine- Do not wash temperature sensitive, short washable programs.
Detergent, softener and other cleaning agents Add detergent and softener before starting the washing program. Never open the detergent dispenser drawer while the washing program is running! When using a program without prewash, no detergent should be put into the pre-wash compartment (Compartment no. I). A program without pre-wash should not be selected if a detergent bag or a dispensing ball is going to be used.
for prewashing for main washing with hard water for washing machines and always follow the instructions on the package. Detergent quantity 1/2 measure 1 measure an additional 1/2 measure Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used.
5 Selecting a program and operating your machine Control panel Figure 2 7 13 9 8 11a 11b 11c 11d 10 14 12 7 – Spin Speed Adjustment Button 8 - Time Delaying Button (+/-) 9 - Temperature Adjustment Button 10 - Start/Pause/Cancel Button 11 - Auxiliary Function Buttons a- Prewash b- Quick Wash c- Rinse Plus d- Anti-creasing 12 - Program Selection Knob 13 - Display 14 - On / Off Button 15 EN
Display symbols Figure 3 13.a - Spin Speed Indicator 13.b – Temperature Indicator 13.c – Spinning Symbol 13.d – Temperature Symbol 13.e – Remaining Time and Delaying Time Indicator 13.f – Program Indicator Symbols (prewashing/main washing/rinsing/ softener/spinning) 13.g – Economy Symbol 13.h – Time Delaying Symbol 13.i – Door Locked Symbol 13.j – Start Symbol 13.k – Standby Symbol 13.l – Auxiliary Function Symbols Turning the machine on Plug in your machine. Turn the tap on completely.
is recommended at this program. It washes the laundry with very tender washing movements without wearing your clothes out. •Woollens You can wash your machine-washable woollen garments at this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. •Delicates You can wash your delicate clothes at this program.
program appears on the temperature indicator (13b). To change the temperature, press the temperature button (Figure 2-9). Temperature falls with 10° decrements. Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. 90˚C Normally soiled, white cottons and linens. (Ex.
Water Consumption (l) Prewash Quick Wash Extra RinseRinse Plus Anti-Creasing Rinse Hold 90 80 70 60 50 40 30 Cold Cottons 90 7 162 153 49 2.72 max. • • • • • • • • • • • • • Cottons 60** 7 148 139 49 1,33 max. • • • • • • • • • • • • • Cottons 40 7 133 124 49 0.72 max. • • • • • • • • • • • • • A Class Super 40 7 168 159 49 0.84 max.
Auxiliary functions Auxiliary function selection keys 11a • • • • 11b 11c 11d Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d. Select the required auxiliary functions before starting the program. Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a) and Quick Wash (Figure 2-11b). Symbol of the selected auxiliary function (Figure 3-13l) will light up.
Time delay With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill with detergent. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press “Time delaying” buttons “+” and “-” (Figure 2-8) to set your desired time delay. Time delaying symbol (Figure 3-13h) will flash. 4. Press “Start/Pause/Cancel” button (Figure 2-10).
Prewash When “Prewash” auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step. Main wash Main wash symbol will light up to indicate that the main wash cycle has started. Rinse Rinse symbol lights up at the beginning of the rinse step. Softener Softener symbol lights up at the beginning of softener step. Spin Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs.
Program in rinse hold mode • This process is shown with the flashing Spin Symbol (Figure 3-13c) and the lit up Standby Symbol (Figure 3-13k). If you wish to spin when the machine is in this mode: Adjust the spin speed. Press “Start/ Pause/Cancel” button (Figure 2-10). The program continues, pumps out the water and spins. Standby Symbol (Figure 3-13k) fades out and Start Symbol (Figure 3-13j) lights up.
6 Quick instructions for daily use Preparation 1. Turn the tap on completely. Check if the hoses are connected tightly. 2. Place the laundry in the machine. 3. Add detergent and softener. Starting 1. Press the “On/Off” button (Figure 2-14). 2. Select the program and the temperature. 3. If desired (according to your machine’s model): – select any auxiliary function, – adjust the spin speed, – set the time delay, 4. Close the loading door. 5. Press “Start/Pause/Cancel” button (Figure 2-10).
After the program is finished Program indicator symbols (Figure 3-13f) on the screen will remain lit after the program is finished. “End” will appear on the screen. 1. Open the loading door and take out the laundry when the door locked symbol on the display (Figure 3-13i) fades out. 2. Press the “On/Off” button (Figure 2-14). 3. Turn the water tap off. 4. Remove any folds in the rubber seal on the loading door and check for debris. 5. Leave the loading door and detergent drawer open to dry.
7 Cleaning and care Detergent drawer • Remove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. Open the hole in the bellow with the aid of a toothpick if it is clogged. C Foreign metal substances in your machine can cause rust stains. In such cases: Clean the drum with a stainless steel cleaning agent. Never use steel wool or wire wool.
• • • If the filters are very dirty, you can pull them out by means of pliers and clean them. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. Replace the gaskets and filters carefully and tighten the hose nuts by hand.
If your product is not supplied with an emergency drain hose, do the following as shown in the figure below: • • • • • Place a large container in front of the filter to receive water flowing from the filter. Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water.
8 Troubleshooting Problem Program cannot be started or selected. Water in the machine. There is water coming from the bottom of the machine. Machine does not fill with water. Machine does not discharge water. Machine vibrates or shakes. Machine stopped shortly after the program started. Cause Explanation / Suggestion Machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.).
The water being taken in is directly discharged. No water can be seen in the machine during washing. Improper position of the drain hose. Connect the water draining hose as described in the operation manual. This is not a problem. The water level is not visible from the outside of the machine. The door is jammed. Water level might be above the lower level of Run either the “Pump” or “Spin” program. the door. Machine might be heating up the water or it may be Wait until the process is over.
In the case of a paused countdown while taking in water: Timer will not countdown until the machine is filled with the correct amount of water. In the case of a paused countdown at the heating It continuously step: Time will not count washes. down until the selected Remaining for the time does not temperature program is reached count down. In the case of a paused countdown at the spinning step: There may be an imbalance of laundry in the machine. It continuously spins.
- Using insufficient amount of detergent for a long time, - Washing at low Washing temperatures for a long performance is time, poor: - Using insufficient Laundry turns amount of detergent for gray hard waters (soil can stick to the laundry), - Using excessive amount of detergent (detergent can stick to the laundry). Insufficient amount of detergent used. Washing Excessive laundry loaded performance is into machine poor: Stain could not Wrong program and be removed, temperature might have not cleaned.
The amount, brand and storage conditions of the detergent used might not be appropriate. Store detergent in a closed and dry place. Do not keep them under high temperatures. Detergent might have been put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. Machine filter may be Check the filter. clogged. Drain hose may be folded. Check the drain hose.
Detergent may have been Dry the detergent drawer before putting in put in wet dispenser detergent. drawer. Detergent may have gotten damp. Detergent residue in the dispensing drawer. Store detergent in a closed and dry place. Do not keep them under high temperatures. Water pressure might be low The detergent in the main wash compartment might have gotten wet while taking in the prewash water.. Detergent might be mixed with the bleaching agent. Excessive laundry might have been loaded in.
10 Service agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge. Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. You should also complete the details below; it will help us assist you when requesting service.
