Operation Manual

35 - EN
selectionprocess,themachinewillswitch
to"Stand-by"modeandtheillumination
levelofthetemperature,speedanddoor
indicatorswilldecrease.Otherlightsand
indicatorswillturnoff.Incaseofturning
theprogramselectionknoborpressingany
button,lightsandindicatorswillturnon.
Progress of program
Progressofarunningprogramisshownthrough
theprogramfollow-upindicator.Atthebeginning
ofeveryprogramstep,therelevantindicatorLED
willlightupandlightofthecompletedstepwill
turnoff.
Youcanchangetheauxiliaryfunctions,speed
andtemperaturesettingswithoutstoppingthe
programflowwhiletheprogramisrunning.
However,thechangetobemademustbe
compatiblewiththeprogramstepthemachine
iscurrentlyin.Ifthechangeisnotcompatible,
relevantlightswillflashfor3times.
C
Ifthemachineisnotspinning,theprogram
maybeinrinseholdmodeortheautomatic
spincorrectionsystemhasbeenactivated
duetoanexcessiveunbalanceddistribution
oflaundryinthemachine.
Changing the selections after the
program has started
Switching the machine to standby mode
Pressthe“Start/Pause”buttontoswitchthe
machinetopausemodewhileaprogramis
running.Thelightofthestepwhichthemachine
isinstartsflashingintheprogramfollow-up
indicatortoshowthatthemachinehasbeen
switchedtothepausemode.Also,whenthe
doorisreadytobeopened,"Door"lightwillalso
illuminatecontinuouslyinadditiontotheprogram
steplight.Ifnecessaryconditionstoopenthe
doorarenotmet,the"Door"lightwillremainoff.
Changing the speed and temperature
settings for auxiliary functions
Auxiliaryfunctionscanbecancelledorselected,
orthespinspeedandtemperaturesettingscan
bechangedinaccordancewiththestepthe
programisin.Ifthechangecannotbemade,
relevantlightwillflashfor3times.
Adding/removing laundry in pause mode
Ifthe"Door"lightflasheswhilethemachineisin
pausemode,itmeansthattheconditions(low
waterlevel,etc.)toopenthedoorhavebeen
metandtheperiodofapprox.1or2minutesto
openthedoorhasstarted.“Door”lampwilllight
upcontinuouslywhenthedoorisunlocked.Door
canbeopenedtoloadorunloadthelaundry
afterthismoment.Ifthefrontdoorcannotbe
openedbecauseofasafetyreasonafterthe
machinehasbeenswitchedtothepausemode
bypressingthe"Start/Pause"button,the"Door"
lightwillcontinuetoremainoff.Nevertheless,the
follow-uplightoftherelevantprograminwhich
themachinewastakento"Pause"modewillflash.
Door lock
Theloadingdoorcanbeopenedoncethe
“Door”lampstopsflashingandstartslightingup
continuously.
Child-proof lock
Protecttheappliancefrombeingtamperedby
childrenbymeansofthechild-prooflock.Inthis
case,nochangecanbemadeintherunning
program.
Toactivatethechildprooflock:
1.Pressthe1
st
and2
nd
auxiliaryfunctionbuttons
for3sec.Thelightsontheauxiliaryfunction
buttons1and2flashwhileyoukeepthebuttons
pressed.
Todeactivatethechildprooflock:
Presstheauxiliaryfunctionbuttons1and2for
3sec.whileanyprogramisrunning.Inaddition
totheabovemethod,child-prooflockcanalso
bedeactivatedbyturningtheprogramselection
knobto"On/Off"positionandselectinganother
programwhennoprogramisrunning.Child-proof
lockwillnotbedeactivatedincaseofpower
failuresorwhenthemachineisunplugged.To
deactivatethechild-prooflock,pressthe1stand
2ndauxiliaryfunctionbuttonsfor3sec.
C
Ifyouturntheprogramselectionknobwhen
thechild-prooflockisactivated,thelightson
theauxiliaryfunctionbuttons1and2flash
for3timestoindicatethatthechild-proof
lockisactivated.Inthiscase,anychangein
temperature,speedandauxiliaryfunctions
whicharealreadyselectedfortheprograms
isnotallowed.
C
Iftheprogramselectionknobisturnedto
"On/Off"positionandthenanotherprogram
isselectedwhileaprogramisrunning,the
previouslyrunningprogramwillresume
operating.
Ending the program through canceling
Whenanotherprogramisselectedinsteadofa
runningprogrambyturningtheprogramselection
knob,thepreviousprogramiscancelled.The
“End/Cancel”lightflashescontinuouslytoindicate
thattheprogramiscancelled.Ifconditionsto
openthedooraremetduringcancellation(if
waterlevelissuitable,etc.),the"Door"lightwill
flashforabout1-2minutes.Whenthe"Door"light
becomessolidafter1or2minutes,itmeansthat
thedoorcannowbeopened.
“Stand-By” mode
“Stand-By”modewillallowtosaveenergywhile
yourmachineisnotrunning.Unnecessarylights
andindicatorswillbeturnedoffinthismode.
Thus,maximumenergysavingisprovided.
Downloaded From WashingMachine-Manual.com Manuals