Item # Model # - USE AND CARE GUIDE 8 LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-446-9092 THANK YOU We appreciate the trust and confidence you have placed in. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents ............................................................2 Safety Information...........................................................2 Warranty ...........................................................................2 Pre-Installation ..................................................................3 Planning Installation...................................................................3 Tools Required............................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installation. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Keep your receipt and these instructions for proof of purchase. TOOLS REQUIRED Safety glasses Ladder Electrical tape Phillips screwdriver Flat blade screwdriver Pliers Wire strippers HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation Pre-Installation (continued) (continued) PACKAGE CONTENTS A B C D E Part Description Quantity A 1 B Light fixture Canopy C Long downtube with coupler 4 D E Short downtube with coupler Long downtube 4 2 1 4 Please contact 1-800-446-9092 for further assistance.
Installation 1 Assembling the light fixture Screw together the desired amount of downtubes (C,D,E). Feed the power cables through the downtubes (C,D,E). Screw the downtube assemblies to the light fixture (A). Remove pre-installed pipe nipple from one side of the canopy (B). Screw pipe nipple onto the one downtube assembly. Screw the remaining downtube assembly (C,D,E) to the remaining pre-installed pipe nipple still secured onto the canopy (B).
Installation (continued) 4 Installing the light fixture B Secure the canopy (B) to the junction box by placing it over the pre-installed pipe nipple on the mounting unit (AA) and securing with the pre-installed finial. AA 5 Installing the light bulb Install eight 60-watt max. medium-base incandescent bulbs or eight 13-watt max. CFL bulbs (not included). A 6 Please contact 1-800-446-9092 for further assistance.
Operation 1 Turning the light on Turn the light switch on to activate the fixture. Care and Cleaning Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is On. There is a faulty wire connection. Check the wiring. The circuit breaker is off.
Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-446-9092 Retain this manual for future use.