User's Guide and Operating Information REF1000 e.One Series ™ Mono Audio Power Amplifier Bel Canto Design, LTD. 212 Third Avenue North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 www.belcantodesign.com Info@belcantodesign.
The Bel Canto Design e.One Series REF1000 is a perfect example of what can be accomplished when elegant engineering and depth of empirical knowledge are combined. All components are selected for high sound quality, precision, technical performance, and material quality. Bel Canto’s circuit designs and component quality will provide superb performance and years of listening satisfaction. ™ REF1000 Mono Audio Power Amplifier T A B L E O F C O N T E N T S Bel Canto Design Statement . . . . . . . . . . .
Get Closer Bel Canto Design audio products are designed to bring you closer to the power and beauty of your music. Our goal is simply to provide the most expressive and powerful musical experience outside of the live event and bring some of the greatest musicians and their performances into the intimacy of your home. We design equipment which is easy to own, use and live with.
Design Features The e.One Series REF1000 is a mono amplifier designed to deliver over 500 watts into 8 ohm loads and 1000 watts into 4 ohm loads. The REF1000 has current drive capability for virtually any loudspeaker load down to 2 ohms. This is achieved in a compact and elegant product through our adaptation of the latest analog switching amplifier and power supply technology from the ICEpower group. analog switching amplifier architecture liberates your loudspeakers to perform at their best.
Unpacking Unpacking The REF1000 box contains: 1 – REF1000 User's Guide 1 - Power Cable for connection to utility power [1.85m, 6' long] 1 – REF1000 Amplifier. 1 - Owner's Warranty / Registration Sheet Carefully inspect your new unit and check for shipping damage. If there is any damage, or if any piece is missing, please contact your dealer, distributor or Bel Canto Design. Save all packing materials as the packing is specially designed to protect the amplifier for shipping or transporting it.
Rear Panel Connections REF1000 Rear Panel Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact! Connecting any Speaker Output on the REF1000 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty. 1) Power Switch: Power is on when the switch is toggled to the I position and off in the O position.
What to do if there is hum or ground noise: 1) Check that the RCA/XLR switch is in the correct position for the type of connection being used. 2) Insure that the preamplifier or any source components are not producing hum by setting the preamplifier to a MUTE or Standby setting.
Specifications Power Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >1000W into 4 ohms, >500W into 8 ohms Minimum Load: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ohms Frequency Response: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +/-0.5dB 20Hz-20KHz, all loads THD+N: . . . . . . . .
Bel Canto Design, LTD. 212 Third Avenue North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 www.belcantodesign.com Info@belcantodesign.com ©2005 Bel Canto Design, LTD e.
