We are proud and excited to present to you the BLACK system by Bel Canto. This system is the result of our passion for the ultimate realism in audio playback. It represents over 20 years of research and development. BLACK is a highly-tuned, highly-optimized audio system with more than a dozen proprietary designs and circuits that ensure near perfect signal transfer. Bel Canto BLACK is a promise to deliver a compelling musical experience from any source. We wish you many years of musical enjoyment.
TABLE OF CONTENTS Safety Information Certifications/Standards Warranty Unpacking Power Connection Setup and Placement The System System Connections Controlling the ASC1 ASC1 Display and Control Functions ASC1 Display Modes ASC1 Programming Programming Options Controlling the MPS1 Specifications Declaration of Conformity 2 3 4 4 5 5 6 7-9 10 11 12 13 14 – 16 17 18 - 19 20 Copyright © 2014 Bel Canto Design Ltd.
Important Safety Instructions Explanation of symbols used in this manual or on the rear/underside of the apparatus: The Lightning Flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.
In the U.K. Fuse replacement: This appliance is fitted with a non-rewireable 10 amp mains plug. The plug contains a 10 amp fuse. If the fuse has blown it can be replaced as follows: a) Pull out the black fuse cover/carrier. b) Remove and dispose of the blown fuse. c) Fit a new 10 amp BS1362 approved fuse into the carrier and push the carrier back into the plug. Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug.
Warranty Information Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online (http://www.belcantoblack.com/Bel-Canto-Black-Support.html) within 30 days of purchase from an authorized dealer to automatically extend your warranty for 5 years starting from the date of purchase. If you do not have web access, please contact your dealer for assistance.
Power Connection The power supplies for the ASC1 and MPS1 are preset for the proper power voltage. The power cable should have the correct plug for your local power system. If you believe this to not be true, please contact your dealer immediately. This product, like any electrical component, can be dangerous and cause injury unless correct handling procedures are observed and used. Before powering this product, it is necessary to read and follow proper setup and procedures.
The System Bel Canto BLACK consists of one ASC1 Asynchronous Stream Controller and two MPS1 Mono PowerStreams. The ASC1 controls the input from all of your sources and sends the digital signal to each MPS1. The signal is decoded by each MPS1 and is then sent to your speakers. This creates the purest path to the loudspeaker, maintaining true high dynamic range and breathtaking musical performance.
System Connections o Ethernet Input: Adheres to the UPnP/DLNA Media Renderer standard. Can be connected to any Ethernet network for streaming audio. Compatible with FLAC, WAV, ALAC, AIFF, DSD, MP3 files and Internet Radio sources. Can stream up to 24/192 and uses true Asynchronous operation mode to eliminate any source jitter. o USB 2.0 Audio Input: Uses Bel Canto Asynchronous technology for direct computer streaming from MAC computers using OSX 6.x.x or later.
System Connections o The BLACK NextGen loudspeaker connectors are optimized for sound quality with any good spade or NextGen banana connector. Note that the NextGen connector is clutched to insure optimum pressure on the contact. - Do not over tighten- The NextGen connector creates a tight and damped contact preventing chatter and contact noise at the connection to the loudspeaker. o The MPS1 Stream input is used for connection to the ASC1 for optimum system dynamic range and performance.
System Connections The BLACK System uses low loss StreamLink ST Fiber to connect the ASC1 Controller front end to the MPS1 Monoblocks. This allows the MPS1s to reside near the loudspeakers while the ASC1 can be located near the source components or listening chair as desired. The system ships with a set of 2 meter StreamLink cables that will work well if the 3 components are located within the same rack. Contact your Bel Canto dealer for custom length StreamLink cables as needed for your system.
Controlling the ASC1 The ASC1 can be operated by using the control wheel on top of the unit, the IR remote, or by using the iOS or Android Application.
ASC1 Display and Control Functions
ASC1 Display Modes
ASC1 Programming
Menu Options
Menu Options
Controlling the MPS1
Specifications ASC1 Asynchronous Stream Controller Maximum Data Input Rates: 24bits at 192KS/s: AES XLR, SPDIF1/2, ST Fiber, TOSLINK 24bits at 192KS/s and DSD64: UPnP/DLNA Ethernet ULN Master Clock Phase Noise: <40femtoSeconds RMS, 100Hz-1Mhz FIR Filter Options: Filter OFF: Standard Linear Phase Filter 1: Minimum Phase Apodizing Flat to 20Khz Filter 2: Minimum Phase Apodizing -3dB at 20Khz Filter 3: Minimum Phase Apodizing -9dB at 20Khz Analog Input: Maximum Input: 2.
Specifications MPS1 Mono PowerStream Power Output: 1200W-2ohm, 600W-4ohm, 300W-8ohm Minimum Load: 2 ohms Peak Output Current: 40 amperes Frequency Response: -3 dB 0Hz-50KHz, all loads THD+N: <0.001% 1W, 1KHz, 4 ohms IMD (CCIF): <0.001%, 1W, 18.5:19.
Declaration of Conformity We, the offerer, Bel Canto Design, Ltd.
R 1.