Handtools
Tooling multi-functional hand tools 2980019-01-B Professional handtool for use with hardened die sets. The combi die set for shielded plugs also accepts ferrule crimping dies. For the longterm and large cable assembly. Platens: A B C * * Suitable dies for tool 2980019-01: *combi die set 2980021-01 accepts ferrule inserts, order ferrule inserts seperately to suit cable O/D (e.g. 2980035-01 for 6mm O/D cable) combi die 8 STP part-no. 2980021-01 ferrule insert outer cable-O 2980034-01 max.
Tooling multi-functional hand tools 2980070-01 & 2980075-01 Professional Handtool for the assembly of shielded Cat 6 plugs. This is a real One-Step tool: contacts and shield is crimped at the same time.
multi-functional hand tools 2980028-01-B Ferrule Handtool for the assembly of shielded SCS plugs (CAT3/CAT5/CAT5+). The ferrule insert can be easily exchanged for the individual cable diameters. Outer cable-Ø part-no. max. 3,7 mm 2980029-01 max. 4,5 mm 2980030-01 max. 5,2 mm 2980031-01 max. 6 mm 2980032-01 max. 6,5 mm 2980065-01 Suitable dies for tool 2980028-01: 2980050-01 & 2980055-01 Professional Handtool for the assembly of shielded Voice-Series™ plugs ( V-P-88-S).
Tooling multi-functional hand tools Die Platens Loaded 2980027-01 & 2980033-01 Contacts A Outer Jacked Strain Relief C Note:- The above tools do not crimp the inner conductor strain relief situated immediately after the contact blade platen 2980027-01 simple and cheap multi-functional hand tools including stripper and cutter to assemble 4-, 6-, MMJ 6- and 8- pole modular plugs. 2980033-01 same as tool above but with 10-pole instead of 8-pole insert.
Bench-Mount Press Tooling 2980100-01 This table mount tool is a low-cost alternative for semi quantity assemblies.
Puch-Down Tool 298HT900 Punch-Down Tool for use together with our VoiceSeries PunchDownBlocks (e.g. V-PDB-8). Supplied together with a belt-case.
ECP1500 Crimp-Press Tooling - The electric Crimp-Press is an extremly versatile crimp machine. - The ECP1500 is deliverable with and without a tester for conductivity and short circuit. - It is able to use the standard die sets. - Fast cycle time allows approx. 800 pieces per hour. - The connecting cables can be crimped together in one operation with simultaneous test for conductivity and short circuit. - The crimping cycle including test takes approx. 1,3 sec.
