User Manual

13
ADJUSTING THE HEADSET
Put on the headset, and adjust the band until it rests with almost no pressure on your ear and the top of your
head. (See Figures 12 and 13)
1. If the headset is too loose, remove it and gently push the headset band inward slightly to tighten it. If the
headset is tight, gently pull the headset band out to loosen it.
2. The microphone boom can be swiveled to position the headset on either your right or left ear.
3. Use one hand to hold the headset in place. Adjust the microphone boom until it is about 1 inch from your
mouth. Do not twist the mic on the end of the boom as this may damage the internal wiring.
4. Use the clothing the clip to attach the headset cord to your lapel or collar and out of your way.
5. Leave enough slack in the headset cord so that you can move your head freely.
6. When you are not using the headset, always place it on the base unit headset holder.
Figure 12
Figure 13