User Manual

18
REVIEWING CALLER ID INFORMATION
When the NEW symbol is appeared on the display, you have received new incoming calls.
Next to the NEW symbol is the total number of new calls.
1. Make sure that the telephone is not in use, Press the Review Up or Review Down
Button to review the incoming stored calls.
2. You will see total new calls number and total calls number “NEW 03 TOTAL 08 ”
3. The reviewed number can be stored by pressing ‘MEMORY” button and press the desired
keypad dialing key(0-9) for memory location.
Press ‘MEMORY’ button again, then displayed number on the LCD will be stored.
4. If the NEW symbol is still displayed when the display goes back to the Stand-By
screen, there are new calls that you have not yet reviewed.
5.When you have reached the end of the call records, the display will indicate
“ END OF LIST “ confirming there are no more calls stored in memory.
ERASING CALLS
Erasing individual calls: When reviewing calls, you can delete individual calls by
pressing the Erase button and holding it for one second. The contents of the LCD
display will be erased line by line and the rest of the Caller –ID records will be
re-numbered.
Erasing all calls : When reviewing calls, you can erase all calls by pressing and holding
the Erase button for more than 3 seconds until ‘ALL ERASED’ appears in the LCD display.