User Manual

19
1. Press the “ERASE’ button again for one second to confirm.
2. “ NO CALLS “ will appear in the LCD display confirming that there are no
calls stored in memory.
USING THE CALL BACK FEATURE
The BE-900MHZCID can call back any telephone number in the LCD display
when connected to a touch tone line. BE-900MHZCID has programmed to set
“1” as the LDS(long distance) code when you use this unit in USA or Canada.
When reviewing received calls, there are two ways to dial the number shown on the
LCD display by pressing the Callback button.
1. If you have reviewed the calls at on-hook mode, press the Callback button and the
“PRESS TO TALK” will appear in the LCD display.
Press the Talk button, then displayed number will be dialed immediately.
Important : To enter Local Distance Code ‘1’, press Callback button again before
pressing Talk button.
UNKNOWN CALLS
When the telephone company is unable to provide the caller’s telephone number,
“UNAVAILABLE” and their name will alternately be displayed on the LCD screen
when this information is received.
1. When the telephone company is unable to provide the caller’s name,
“UNAVAILABLE” and their phone number will be displayed on the screen.