User's Manual

Redialing
1. Press T.
2. Wait until you hear a dial tone, and then press R
to redial the number last dialed (up to 32 digits).
Note: You can also press R/DELETE first to
display the number and then press T
to dial the
number displayed.
Additional Options
20
BASIC OPERATION
Making Calls
1. Pick up the handset from the base and press T.
2. Wait until you hear a dial tone, and then dial the
number you wish to dial.
3. When you are finished talking, press the T
key or
place the unit back into the base to end the call.
Note: The CHARGE light on the base will illuminate
when the line is active.
Receiving Calls
When you hear the phone ring:
1. If the handset is in the base, lift the handset from the
base. The handset will turn on. There is no need to
push the T
key if the unit is on the base when the
call comes in. This auto-answer feature can be
programmed off (see “Settings,” page 27).
2. If the handset is off the base, you will need to press
T
to answer the call. The display will show the
Caller ID information after the first ring.
3. When you are finished, push T
or place the handset
back on the base.
BASIC OPERATION
CID Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
CID Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
To: Do This:
Adjust the volume in the Press during a call until the desired volume level
earpiece is reached.
Switch to temporary tone Press the <
key after the phone is in use. The phone
dialing will remain in tone dialing mode for the duration of the call.
Receive a call waiting call Press E
to go to the new caller.
Press E again to go back to the original caller.
Mute a call Press the L
key.
Press L
to continue speaking to the caller.
00 04
MIN
SEC
TALK
00 04
MIN
SEC
TALK
00 04
MIN
SEC
TALK
RING
9:45 10/11 0 11
NEW
TOTAL
AM
CID Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
19