User's Manual

Call transfer
When you wish to transfer an external call to another extension
)Press INT and the desired number during call
)The external call is put on hold and the destination party is ringing for 10 seconds.
)When the destination party does not answer, the origination party is ringing for 10 seconds
)When the origination party does not answer, the all of the parties are ringing for 10 seconds
)If the any handset does not pick up, the external call is dropped.
Internal call
)Press INT in standby mode
)Enter the number of internal handset (0 to 3, 0 is base call)
)If you drop the internal call, press TEL
)If answer the internal call, press TEL
Call switching
When received Incoming ring from CEL/TEL during TEL/CEL talk mode, user can select the choice the following
methods
3. Press CEL/TEL, and hold the current talk and seize the new call
4. Press TEL/CEL, and drop the current talk and seize the new call
If user want to toggle conversation between CEL and TEL, than can select the choice the following methods,
5. Press CEL to seize the held cellular call, and the tel call goes to hold mode and connect the cellular call.
6. Press TEL to seize the held tel call, and the cellular call goes to hold mode and connect the tel call
7. Press CEL to seize the held tel call, and the cellular call is dropped and connect the tel call
8. Press TEL to seize the cellular call, and the tel call is dropped and connect the cellular call
)If cellular call is dropped by external party , tel call is connected directly.
Call waiting(type II) -TBD
Press FLASH to pick up the second call. (The first call is put on hold)
Press FLASH again to go back to the first call.
*The LEDs show which service it is coming from when it receives a second call.(The service user is using is shown with
solid light and the service the second call is using is shown with blinking LED. If the both calls are using the same service,
then only its service:LED blinks)
Voice mail from Cellular (TBD)
Check voice mail
)Press and hold 1 for 1 sec. It connects to voice mail of the cellular phone directly.
)If a cellular phone is not docked in, it doesn’t dial out and generate an error tone.
*Once a cellular phone is docked, read the number of unit and memorize it automatically. The voice mail number is the same