User's Manual

5. Recharge only the battery type that is provided with or identified for use with this product. If a
different type of battery is used, it may leak or explode.
6. Do not attempt to rejuvenate the battery provided with or identified for use with this product by
heating them. Sudden release of the battery electrolyte may occur, causing burns or irritation to
eyes or skin.
7. When inserting the battery into this product, the proper polarity or direction must be observed.
Reverse insertion of battery may result in leakage or explosion.
8. Remove the battery from this product if the product will not be used for a long period of time
(several months or more) since during this time they could leak in the product.
9. Discard the "dead" battery as soon as possible since "dead" battery are more likely to leak in a
product.
10. Do not store this product, or the battery provided with or identified for use this product, in high-
temperature areas. Battery that are stored in a freezer or refrigerator for the purpose of
extending shelf life should be stabilized at room temperature prior to use after cold storage.
11. Always disconnect all telephone line cords from the wall modular jacks before installing or
replacing the battery.
"
""
"
CARTON CONTENT S
❏
S4200 BASEUNIT and HANDSET &CELLULAR CRADLE units
❏
120V / 60Hz DC 9V 500mA/ 150mA Dual ADAPTOR
❏
120V / 60Hz DC 9V 100mA ADAPTOR *option
❏
EAR-PHONE with MICROPHONE * option
❏
User’s Manual, Warranty and Safety Information
❏
NI-MH 3.6V/ 600mA BATTERY
❏
TELEPHONE LINE CORD