User's Manual

3
Written By: Belco International Co., Ltd. PAGE: 13 of 24
2.6.2 Base unit:
# Function User Interface Note
1 Page Press PAGE key to page the B/S. Ring the H/S for 15
second. Paging will be terminated by pressing PAGE button
on the base again.
Pressing the “talk“key on the hand set will establish RF link.
If handset is off hook, softer ring on handset will alert paging
from Base unit.
2 T/P Switch
Set Tone or Pulse dialing depending on the position of the switch.
Mechanical 2 position
switch.
3 Talk LED
OFF – neither is the telephone line in use, nor is an incoming ring
detected
Turn on – Telephone is in use
Fast blinking – When the unit is receving an incoming ring.
Ring Cadence - Shall indicate the cadence of the ring signal, by
blinking only when ringing voltage is present on line.
Fast blinking followed by off -> When the handy unit is placed on
its cradle of base unit for id handshaking, For a normal operation
the Talk LED shall be "off" status after fast-blinking
4 Charge/
Page LED
OFF – No charge
ON – Charging of battery in H/S in progress.
Fast blinking per ring sound shall occur during paging.