Datasheet
RS20-0400T1T1SDAEHH04.0.
Industrial Networking:Industrial Ethernet:OpenRail System:Compact:Switches Software
Release 4.0
Hirschmann Automation and Control GmbH
Lieferinformationen
Lieferstatus bestellbar
Dokument erstellt am 20.08.2008
Produktbeschreibung
Beschreibung 4 Port Fast Ethernet-Switch, managed, Software Layer 2 Enhanced, für DIN
Hutschiene Store-and-Forward-Switching lüfterloses Design
Port-Typ und Anzahl 4 Ports gesamt; 1. Uplink: 10/100BASE-TX, RJ45; 2. Uplink: 10/100BASE-TX,
RJ45, 2 x Standard 10/100 BASE TX, RJ45
Typ RS20-0400T1T1SDAEHH04.0.
Bestell-Nr. 943 434-007
Weitere Schnittstellen
Versorgung/Meldekontakt 1 x steckbarer Klemmblock, 6-polig
V.24 Zugang 1 x RJ11 Buchse
USB-Schnittstelle 1 x USB zum Anschluß des Autokonfigurationsadapters ACA21-USB
Netzausdehnung-Leitungslängen
Twisted Pair (TP) 0 - 100 m
Netzausdehnung-Kaskadiertiefe
Linien-/Sternstruktur beliebig
Ringstruktur (HIPER-Ring) Anzahl Switche 50 (Rekonfigurationszeit kleiner 0,3 sec.)
Versorgung
Betriebsspannung 12/24/48 V DC (9,6-60) V und 24 V AC (18-30) V (redundant)
Stromaufnahme bei 24 V DC 221 mA
Stromaufnahme bei 48 V DC 111 mA
Leistungsabgabe in Btu (IT) h 18,1
Software
Management Serielle Schnittstelle, Web-Interface, SNMP V1/V2, HiVision Filetransfer SW
HTTP/TFTP
Diagnose LEDs, Log-File, Syslog, Meldekontakt, RMON, Portmirroring, Topology Discovery
802.1AB, Disable Learning
Konfiguration Comand Line Interface (CLI), TELNET, BootP, DHCP, DHCP Option 82,
HIDiscovery, Autokonfigurationsadapter (ACA11, ACA21-USB), Watchdog
Konfiguration
Sicherheit Port Security (IP und MAC), SNMP V3 (no encryption)
Redundanzfunktionen HIPER-Ring (Ringstruktur), MRP (IEC-Ringfunktion), (Release 4.0: RSTP 802.1w,
Release 4.1: RSTP 802.1D-2004), redundante Netz-/Ringkopplung,Dual Homing,
redundante 24 V Einspeisung
Filter QoS 4 Klassen, Portpriorisierung (IEEE 802.1D/p), VLAN (IEEE 802.1Q),
Multicast (IGMP Snooping/Querier), Multicast Detection unknown Multicast,
Broadcastlimiter, Fast Aging
Industrial Profiles EtherNet/IP und PROFINET kompatibel, Konfiguration und Diagnose mit
Automatisierungssoftware tools wie z.B STEP7, oder Control Logix
Realtime SNTP Server
Flow Control Flow Control 802.3x, Port Priority 802.1D/p, Priority (TOS/DIFFSERV)
Voreinstellungen Standard
Zulässige Umgebungsbedingungen
Betriebstemperatur 0º bis +60ºC
Lager-/Transporttemperatur -40º bis +70ºC
rel. Luftfeuchte (nicht kondensierend) 10% bis 95%
Seite 1 von 2