Datasheet

ManualsBrandsBELDEN ManualsIndustrial Data CablesNetwork cable CAT 5e U/UTP 4 x 2 x 0.205 mm² Grey Sold per metre

Belden 1583E

Product Datasheet

P/N 46077

Page 1 of 2

Rev. 4/ 2003-03-12

Cat 5 enhanced UTP PVC

ã Belden Wire & Cable B.V. Netherlands Tel. +31-(0)77-3878-555 - Fax. +31-(0)77-3878-488 - E-mail: sales.info@belden-europe.com

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.

All printing errors are subject to correction. Technical specifications are subject to change without notice.

· Horizontal and building backbone cable.

· Support current and future Category 5 enhanced applications, such as:

100 Base TX, 100 Base VG AnyLan, 155 ATM and 1000 Base-T (Gibabit Ethernet), FDDI.

· General standards: ISO/IEC 11801 2

edition (2002), EN 50173 2

edition (2001),

ANSI/TIA/EIA 568-b.2 (2002)

· Construction: 4 unshielded twisted pairs

· Conductor: Solid bare copper

· Conductor diameter: AWG 24 (0,51 mm)

· Conductor insulation material: Polyolefine

· Diameter over insulation: 0.90 mm

· Jacket material: Flame retardant PVC

· Outer diameter: 5.0 mm

Nominal mutual capacitance at 1 kHz 50 nF/km

Maximum conductor DCR 93.5 Ohm/km

NVP - Nominal Velocity of Propagation 0.70 c

SKEW – Propagation delay difference (100 MHz)

typical £ 15 ns/100m

Mean Characteristic Impedance 4-100 MHz

100 ± 5 Ohm

: According to cable requirements of ISO/IEC 11801 category 5E, Sept. 2002.

Temperature range - operation/storage -20°C - +60°C

Temperature range – installation +0°C - +50°C

Minimum bending radius – operation 20 mm

Minimum bending radius – installation 40 mm

Maximum pulling tension 80 N

Flame retardancy IEC 60332-1

Caloric value 305 kJ/m

Weight (approx.) 28 kg/km

Maximum operating voltage 72 V rms

Maximum continuous current per conductor (25°C)

1.4 A

Construction & Dimensions

lication

features and Standards

Electrical characteristics

(

at 20 ºC

)

General and environmental characteristics

Pair 1 White-Blue/Blue

Pair 2 White-Orange/Orange

Pair 3 White-Green/Green

Pair 4 White-Brown/Brown

Colour identification according to

IEC 60304

Summary of content (2 pages)

PAGE 1
Product Datasheet P/N 46077 Page 1 of 2 Rev. 4/ 2003-03-12 Belden 1583E Cat 5 enhanced UTP PVC Application · · Horizontal and building backbone cable. Support current and future Category 5 enhanced applications, such as: 100 Base TX, 100 Base VG AnyLan, 155 ATM and 1000 Base-T (Gibabit Ethernet), FDDI. Key features and Standards · nd nd General standards: ISO/IEC 11801 2 edition (2002), EN 50173 2 edition (2001), ANSI/TIA/EIA 568-b.
PAGE 2
Product Datasheet P/N 46077 Page 2 of 2 Rev. 4/ 2003-03-12 Belden 1583E Cat 5 enhanced UTP PVC Electrical characteristics (at 20 ºC) Attenuation Frequency 1) Spec. (Max.) Typical 4 4.1 3.9 10 6.5 6.2 16 8.3 7.9 20 9.3 8.9 31.2 11.7 11.2 62.5 17.0 16.0 100 22.0 19.8 MHz dB/100m dB/100m NEXT (Near end crosstalk) Frequency 1 4 1) Spec. (Min.) 56.3 Typical [73] 64 10 50.3 58 16 47.3 55 20 45.8 54 31.2 42.9 51 62.5 41.4 47 100 35.3 44 MHz dB/100m dB/100m Power sum NEXT Frequency 1 1) Spec.