Data Sheet

TECHNICAL DATA SHEET

code

70006E

version

2x2xAWG 22 (QUAD)

date

2009-12-04

page

1/2

ã Belden Wire & Cable B.V.

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner

CONSTRUCTION

1. Conductor 0.65 mm (22AWG) bare copper wire

2. Insulation

Material PE

Diameter over insulation 1.50 ± 0.05 mm

Colour of insulation White,Blue and Yellow,Orange

3. Filler

4. Bedding

Material PVC

Nom. Diameter 3.90 mm

5. Foil + Braid

Material Aluminium / Polyester

Coverage of braided screen > 85%

6. Sheath

Material PVC

Colour Green RAL 6018

Nominal diameter over jacket 6.50 +/- 0.20 mm

5. Foil + braid

4. Bedding

6. Sheath

1. Conductor

3. Filler

2. Insulation

PAGE 1
TECHNICAL DATA SHEET 2x2xAWG 22 (QUAD) code version date page 70006E 3 2009-12-04 1/2 CONSTRUCTION 1. Conductor 2. Insulation 3. Filler 4. Bedding 5. Foil + braid 6. Sheath 1. 2. 3. 4. 5. 6. Conductor Insulation Material Diameter over insulation Colour of insulation Filler Bedding Material Nom. Diameter Foil + Braid Material Coverage of braided screen Sheath Material Colour Nominal diameter over jacket 0.65 mm (22AWG) bare copper wire PE 1.50 ± 0.05 mm White,Blue and Yellow,Orange PVC 3.
PAGE 2
TECHNICAL DATA SHEET 2x2xAWG 22 (QUAD) code version date page 70006E 3 2009-12-04 2/2 REQUIREMENTS AND TEST METHODS Electrical: ISO/IEC 11801 ed. 2.0, Cat.5e Max. operating voltage Maximum conductor DC-resistance @ 20˚C Transfer impedance @ 10MHz Nom. velocity of propagation Delay Impedance @ 1 – 100 MHz Frequency Nom. (MHz) Attenuation (dB/100m) 1 2.1 4 4.1 10 6.5 16 8.3 31.25 11.7 62.5 17 100 22 Min. Next (dB) 65.3 56.3 50.3 47.2 42.9 38.4 35.