Data Sheet

TECHNICAL DATASHEET

code

72002NH

PRELIMINARY

version

date

2009-04-14

2 PR CAT5E SF/UTP PATCH 26AWG

FRNC

page

1/3

ã Belden Wire & Cable B.V.

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner

STANDARDS

· ISO/IEC 11801 and ISO/IEC 24702

· EN 50173 – 1

· TIA/EIA-568-B.2

CABLE CONSTRUCTION

Conductor:

Material Stranded PACW

Construction 7X0.16 mm (26 AWG)

Insulation:

Material PP

Diameter 0.98 mm +/- 0.05

Pair

Pair 2 twisted insulated conductors

Number of pairs 2 all twisted together Left hand lay.

Colour code pair 1 White / Blue & Blue

Colour code pair 2 White / Orange & Orange

Filler PP

Tape (optional)

Material Polyester tape

Foil-Screen

Material Al/Polyester (Al side outside)

Braided Screen:

Material tinned copper

Coverage >80%

Sheath:

Material FRNC oil resistant & UV stabilised

Diameter 6.0 +/- 0.3 mm

Wallthickness 0.8 mm

Colour Black

PAGE 1
TECHNICAL DATASHEET PRELIMINARY 2 code 72002NH version 1 date 2009-04-14 2 PR CAT5E SF/UTP PATCH 26AWG FRNC page 1/3 STANDARDS · ISO/IEC 11801 and ISO/IEC 24702 · EN 50173 – 1 · TIA/EIA-568-B.2 CABLE CONSTRUCTION Conductor: Material Stranded PACW Construction 7X0.16 mm (26 AWG) Insulation: Material PP Diameter 0.98 mm +/- 0.05 Pair 2 twisted insulated conductors Number of pairs 2 all twisted together Left hand lay.
PAGE 2
code 72002NH version 1 date 2009-04-14 TECHNICAL DATASHEET PRELIMINARY 2 2 PR CAT5E SF/UTP PATCH 26AWG FRNC page 2/3 ELECTRICAL CHARACTERISTICS Low frequency and D.C. D.C. resistance conductor < 140 Ω/km Resistance unbalance <2% D.C. insulation resistance > 5000 MΩ.km Dielectric strength cond. – cond. (2 sec.) 2.5 kV D.C. Mutual capacitance < 56 nF/km Capacitance unbalance < 1600 pF/km High frequency Velocity of propagation @ 4 – 100 MHz ≥ 0.
PAGE 3
code 72002NH version 1 date 2009-04-14 TECHNICAL DATASHEET PRELIMINARY 2 2 PR CAT5E SF/UTP PATCH 26AWG FRNC page 3/3 Temperature range during installation -5 / +50 °C Temperature range during operation -40 / +80 °C Flame propagation IEC 60332-1 Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product. ã Belden Wire & Cable B.V.