Data Sheet

TECHNICAL DTATSHEET

code

74001E

version

Date

2009-05-18

4 PR CAT5E SF/UTP 24AWG PVC

page

1/3

ã Belden Wire & Cable B.V.

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner

STANDARDS

· ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702

· EN 50173 – 1 (November 2002).

· TIA/EIA-568-B.2 (May 2001).

CABLE CONSTRUCTION

Conductor

Material Solid bare copper ETP

Diameter AWG 24

Insulation

Material Polypropylene

Diameter over insulated conductor 1.1 ± 0.05 mm

Pair

Pair 2 twisted insulated conductors, non bonded

Number of pairs 4, all twisted together

Colour code pair 1 White / Blue & Blue

Colour code pair 2 White / Orange & Orange

Colour code pair 3 White / Green & Green

Colour code pair 4 White / Brown & Brown

Insulating foil

Material Polyester

Shielding foil

Material Laminated Aluminium / Polyester

Position aluminium Outside

Braid

Material Solid tinned copper

Coverage minimum. 80 %

Sheath:

Material PVC

Diameter 7.0 +/- 0.3 mm

wallthickness 0.8 mm

Colour Black

PAGE 1
TECHNICAL DTATSHEET 2 4 PR CAT5E SF/UTP 24AWG PVC code version Date page 74001E 1 2009-05-18 1/3 STANDARDS · ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702 · EN 50173 – 1 (November 2002). · TIA/EIA-568-B.2 (May 2001). CABLE CONSTRUCTION Conductor Material Solid bare copper ETP Diameter AWG 24 Insulation Material Polypropylene Diameter over insulated conductor 1.1 ± 0.
PAGE 2
TECHNICAL DTATSHEET 2 4 PR CAT5E SF/UTP 24AWG PVC code version Date page 74001E 1 2009-05-18 2/3 ELECTRICAL CHARACTERISTICS Low frequency and D.C. D.C. resistance conductor < 93.8 Ω/km D.C. loop resistance < 19.0 Ω/100m Resistance unbalance <2 % D.C. insulation resistance > 5000 MΩ.km Dielectric strength cond. – cond. (2 sec.) 2.5 kV D.C. Mutual capacitance < 56 nF/km Capacitance unbalance < 1600 pF/km ≥ 0.6 c ≤ 40 ns/100m ≤ 534 + 36/Vf ns/100m ≤ 1.9108*Vf+0.0222*f+0.
PAGE 3
code version Date page TECHNICAL DTATSHEET 2 4 PR CAT5E SF/UTP 24AWG PVC 74001E 1 2009-05-18 3/3 MECHANICAL CHARACTERISTICS Elongation at break conductor ≥ 10 % Elongation at break insulation ≥ 100 % Elongation at break sheath ≥ 100 % Tensile strength sheath ≥15 Mpa ENVIRONMENTAL AND OVERALL CHARACTERISTICS Maximum operating voltage 450 V D.C. and 300 V A.C. Maximum continuous current per conductor (@25°C) 1.