Data Sheet

TECHNICAL DATASHEET

code

74002E

PRELIMINARY

version

datel

2009-04-02

4 PR CAT5E SF/UTP PATCH 26AWG PVC

page

1/3

ã Belden Wire & Cable B.V.

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner

STANDARDS

· ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702

· EN 50173 – 1 (November 2002).

· TIA/EIA-568-B.2 (May 2001).

CABLE CONSTRUCTION

Conductor:

Material Stranded PACW

Construction 7X0.16 mm (26 AWG)

Insulation:

Material PP solid

Diameter 0.98 mm +/- 0.05

Pair

Pair 2 twisted insulated conductors

Number of pairs 4, all twisted together Left hand lay.

Colour code pair 1 White / Blue & Blue

Colour code pair 2 White / Orange & Orange

Colour code pair 3 White / Green & Green

Colour code pair 4 White / Brown & Brown

Tape (optional)

Material Polyester tape

Foil-Screen

Material Al/Polyester (Al side outside)

Braided Screen:

Material tinned copper

Coverage >80%

Sheath:

Material PVC oil resistant

Diameter 6.5 +/- 0.3 mm

Colour Black

PAGE 1
TECHNICAL DATASHEET PRELIMINARY 2 4 PR CAT5E SF/UTP PATCH 26AWG PVC code version datel page 74002E 1 2009-04-02 1/3 STANDARDS · ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702 · EN 50173 – 1 (November 2002). · TIA/EIA-568-B.2 (May 2001). CABLE CONSTRUCTION Conductor: Material Stranded PACW Construction 7X0.16 mm (26 AWG) Insulation: Material PP solid Diameter 0.98 mm +/- 0.05 Pair 2 twisted insulated conductors Number of pairs 4, all twisted together Left hand lay.
PAGE 2
TECHNICAL DATASHEET PRELIMINARY 2 4 PR CAT5E SF/UTP PATCH 26AWG PVC code version datel page 74002E 1 2009-04-02 2/3 ELECTRICAL CHARACTERISTICS Low frequency and D.C. D.C. resistance conductor < 145 Ω/km Resistance unbalance <2% D.C. insulation resistance > 5000 MΩ.km Dielectric strength cond. – cond. (2 sec.) 2.5 kV D.C. Mutual capacitance < 56 nF/km Capacitance unbalance < 1600 pF/km High frequency Velocity of propagation @ 4 – 100 MHz ≥ 0.
PAGE 3
TECHNICAL DATASHEET PRELIMINARY 2 4 PR CAT5E SF/UTP PATCH 26AWG PVC code version datel page Temperature range during operation -40 / +80 °C Flame propagation IEC 60332-1 UL AWM 2464 74002E 1 2009-04-02 3/3 Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product. ã Belden Wire & Cable B.V. All rights are reserved.