User manual

24
Or:
1 Press [, and using [ to select
VOICE MAIL.
2 Confirm with OK.
3 Using [ select
MESSAGES.
4 Confirm with OK.
5 Using [ select
PLAY.
6 Confirm with OK.
7 Select the desired message using [.
8 Confirm with OK. The message is played back.
Deleting messages
On the device
Deleting an Individual Message
During playback, press C and OK in order to delete the
currently playing outgoing message.
Deleting Heard Messages
Deleting New Messages
1 Press b.
2 Using [ select
MESSAGES.
3 Confirm with OK.
4 Using [ select
MESSAGE: DELETE.
5 Confirm with OK. The heard messages are deleted.
On the cordless telephone
Deleting single message
During the playback, press 0 to delete the current mes-
sage.
Deleting messages already played
Deleting New Messages
1 Press [, and using [ to select VOICE MAIL.
2 Confirm with OK.
3 Using [ select
MESSAGES.
4 Confirm with OK.
5 Using [ select
DELETE OLD.
6 Confirm with OK.
7 Confirm the deletion with ô
Yes. Using õ No you
can cancel the function.
Setting up forwarding and remote
access
Available only on the device
Entering Access Code
Access Code
You must enter an access code to be able to receive trans-
ferred messages, or listen to your answering machine from
distant telephones.
Switching On and Off
1 Press b.
2 Using [ select
ACCESS CODE.
3 Confirm with OK.
4 Enter a four-digit code.
5 Confirm with OK.
Forwarding Messages
Forwarding Messages
The machine forwards messages to a specified telephone
number. Once the configured number of messages is
reached, the machine calls the number. If the call is an-
swered, a greeting text is played. Then the person on the
line must enter the access code. If no code is entered or an
incorrect code is entered three times, the machine hangs
up.
1 Press b.
2 Using [ select
FORWARDING.
3 Confirm with OK.
4 Use [ to select whether you would like to switch for-
warding on or off.
5 Confirm with OK.
6 Enter the number to which the received messages
should be forwarded.
7 Confirm with OK.
8 Use [ to select how many messages should be collect-
ed and forwarded together.
9 Confirm with OK.
10 Recording a new outgoing message: Press OK
to record an outgoing message. Wait for the confirma-
tion tone before you say your text.
11 Press OK to end the recording. The recording is played
back.
Press 2 to interrupt the current message. Press
1 and 3 to navigate among the messages.
Messages not yet heard must be heard first before de-
leting them.
You can also call the function by pressing OK,
72 and OK.
You can also delete the already heard messages by
pressing C and OK in the starting mode.
Messages not yet heard must be heard first before de-
leting them.
These functions are available only on the device.
The remote control is switched off with the factory-
installed access code (
0000). Change the access code
to switch on the remote control. If you want to
switch the remote control off enter the factory-in-
stalled code
0000 again.
You can also call the function by pressing OK,
79 and OK.
The access code may not be identical to the VIP
code.
You can also call the function by pressing OK,
77 and OK.
When you record a message, you are asked, if you
would like to use the old message or would like to
record a new one. Confirm using OK.