User manual

39
14 Telephone Lines
and Additional De-
vices
Configuring Telephone Lines and
Services
PABX Systems
PABX Systems
Private branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
1 Press OK, 96 and OK.
2 Use [ to set whether you operate your device on an
extension.
3 Confirm with OK.
4 Configuring an extension: Enter the outside line
access code with which you reach the public telephone
network. This is usually 0.
5 Confirm with OK.
6 When finished, the machine tests the telephone line.
Confirm with OK.
7 Your device checks whether it can establish a connec-
tion with the public telephone network. If it cannot es-
tablish the connection, you are once again asked for in-
put.
PhoneMail
You cannot simultaneously use the PhoneMail function
and receive faxes on your devices. Get the PhoneMail func-
tion for your telephone connection deactivated.
Registering and de-registering ad-
ditional cordless telephones
Configuring the Cordless Telephone
Normally your cordless telephone is registered with your
device in the factory. In the starting mode, press OK. The
display shows on which base unit and with which number
the cordless telephone is registered.
Additional cordless telephones
You can register in all up to five cordless telephones with
your device.
GAP Compatible
Registering cordless telephone
Registering cordless telephone
You must first bring the cordless telephone and then your
device (= base station) in the registration mode to register
a cordless telephone.
1 Press [, and using [ to select
SETTINGS.
2 Confirm using OK.
3 Use [ to select
ADVANCED SET..
4 Confirm using OK.
5 Dial using [
SET HANDSET.
6 Confirm using OK.
7 Dial using [
REGISTRATION.
8 Confirm using OK.
9 Confirm using ô
Yes. The cordless telephone goes
into registration mode.
10 Press OK, 82 and OK on the device
11 Confirm the preset PIN code (
0000) using OK.
The cordless telephone is automatically registered. This
process can take a few minutes. Then the number with
which it is registered with the device appears on the display
of the cordless telephone.
Registering other cordless telephones
De-registering Cordless Telephone
From the Device
1 Press OK, 83 and OK.
2 Using [ to select which cordless telephone you are
would like to de-register.
3 Confirm using OK. The device disconnects from the
cordless telephone.
From the Cordless Telephone
1 Press [, and using [ to select SETTINGS.
2 Confirm using OK.
3 Use [ to select
ADVANCED SET..
4 Confirm using OK.
5 Use [ to select
SET BASE.
6 Confirm using OK.
7 Use [ to select
DELETE HANDSET.
8 Confirm using OK.
9 Using [ to select which cordless telephone you are
would like to de-register.
10 Confirm using OK.
11 Confirm the de-registration with ô
Yes. The con-
nection with the device is disconnected.
In rare cases, the outside line access code may be
a different number or a two-digit number. For
older telephone systems, the outside line access
code can be R (= Flash). Press R to enter this out-
side line access code. If the connexion to the pub-
lic telephone network is not possible, contact
your telephone system supplier.
Additional cordless telephone must be GAP-compat-
ible.
You can register other cordless telephones with your
device in the same manner. If you face any difficulties
in registering, de-register all cordless telephones, and
re-register them individually.