User manual

6 Turn the blue gear wheel forward to tension the ink

film. The ink film must not have any creases.

7 Close the device. Insert the paper tray in the opening

provided for it behind the paper feeder. Insert paper

again.

Cleaning

1 Remove the paper from the paper feeder and take the

paper tray out of the device.

2 Open the device by lifting the panel using grip in the

centre and folding it down.

3 Open the scanner cover by pushing the supports (A)

and (B) towards each other. The cover (C) falls freely.

4 Lightly wipe the upper side of the scanner glass (A) and

the lower side of the document feeder/scanner film (=

white plastic plate) (B) with a cloth.

5 Clean the feed roller (A) and the underside of the sup-

port pad of the feeder roller (B) with a soft, lint-free

cloth moistened with cleaning alcohol (96 percent).

Rotate the feed roller; You must clean the entire roller.

6 Close the scanner cover. Both the supports must se-

curely snap into place.

Unplug the machine from the power socket before

cleaning it. Use a soft, lint-free cloth. Never use liq-

uid or easily flammable cleansers (sprays, abrasives,

polishes, alcohol, etc.). Do not allow any moisture to

reach the interior of the fax machine.

Lock the cover of the machine completely into

place when opening the machine. You could be

injured if the cover falls while you are working on

the machine.