Belgafax™ 700 Handleiding
Titan.book Page 76 Monday, March 3, 2003 4:54 PM Garantievoorwaarden Het toestel dat u net hebt aangekocht, werd door Belgacom zorgvuldig uitgezocht en wordt gedurende twee jaar gedekt door een waarborg op onderdelen en arbeidsloon tegen materiële gebreken en fabrieksfouten, behoudens andersluidende contractuele bepalingen. De waarborg begint te lopen op de datum van de afhaling of de levering van het toestel.
Titan.book Page ii Tuesday, March 4, 2003 9:12 AM © Copyright Hewlett-Packard Company 2003 Alle rechten voorbehouden. Geen enkel gedeelte uit dit document mag worden gefotokopieerd, verveelvoudigd of vertaald naar enige andere taal zonder voorafgaande schriftelijke toestemming van Hewlett-Packard Company. Adobe en het Acrobatlogo zijn gedeponeerde handelsmerken of handelsmerken van Adobe Systems Incorporated in de Verenigde Staten en/of andere landen. Editie: february 2003 Gedrukt in Duitsland.
Titan.book Page iii Tuesday, March 4, 2003 9:12 AM Inhoud 1 2 3 Help opvragen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Snel aan de slag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Uw apparaat met een computer gebruiken . . . . . . . . . . . . . . . . . . . . . 5 Menufuncties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Originelen en papier laden . . . . . . . . . . . . . . . . . . . . . . . . . .
Titan.book Page iv Tuesday, March 4, 2003 9:12 AM Inhoud 7 Onderhouden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 De glasplaat schoonmaken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 De glasplaat van de automatische documentinvoer (ADF) schoonmaken .43 De binnenkant van de klep schoonmaken . . . . . . . . . . . . . . . . . . . . . .44 De buitenkant schoonmaken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Titan.book Page 1 Tuesday, March 4, 2003 9:12 AM 1 Help opvragen Help Beschrijving Setup-poster De Setup-poster bevat instructies voor de installatie en configuratie van het apparaat. Productrondleiding* De rondleiding geeft een korte inleiding van het apparaat en de mogelijkheden ervan, zodat u er onmiddellijk mee aan de slag kunt. U hebt via de knop Start direct toegang tot de rondleiding nadat u de software hebt geïnstalleerd. Ga naar Director en klik op Help.
Titan.
Titan.book Page 3 Tuesday, March 4, 2003 9:12 AM 2 Snel aan de slag U kunt vele functies ofwel rechtstreeks via het bedieningspaneel uitvoeren of vanuit de software. Ook als het apparaat niet op een computer is aangesloten, kunt u vanaf het bedieningspaneel kopiëren, foto’s afdrukken of documenten faxen. U kunt een groot aantal instellingen wijzigen met de knoppen op het bedieningspaneel en het menusysteem.
Titan.book Page 4 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 2 Optie Functie 7 Faxen Resolutie: met deze knop stelt u de faxresolutie in op Fijn, Standaard 300 dpi of Foto. De laatst gekozen instelling zal steeds worden gebruikt zolang u de instelling niet wijzigt. 8 Start Faxen - Zwart: met deze knop maakt u zwart-witfaxberichten. 9 Start Faxen, Kleur: met deze knop maakt u kleurenfaxberichten.
Titan.book Page 5 Tuesday, March 4, 2003 9:12 AM Snel aan de slag Optie Functie 18 Aan: met deze knop schakelt u het apparaat in of uit. 19 Lichter/Donkerder: met deze knop maakt u de kopieën en de te verzenden faxberichten lichter of donkerder. 20 Controle nodig: als het oranje lampje (uitroepteken) brandt, moet u het apparaat controleren. 21 Annuleren: met deze knop stopt u een taak, sluit u een menu of sluit u knopinstellingen af.
Titan.book Page 6 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 2 1 2 7 3 Optie 6 4 5 6 Functie 1 Apparaat selecteren: hiermee kunt u het gewenste product selecteren in de lijst met geïnstalleerde producten. 2 Instellingen: hiermee kunt u verschillende instellingen van het apparaat bekijken of wijzigen, zoals de instellingen voor afdrukken, scannen en kopiëren. 3 Foto scannen: hiermee scant u een afbeelding en geeft u deze weer in de Gallery.
Titan.book Page 7 Tuesday, March 4, 2003 9:12 AM Snel aan de slag Menufuncties Open de menufuncties door op de overeenkomende nummers voor de menuoptie te drukken. Bijvoorbeeld: druk op Menu, vervolgens op 7 en 4 om de taal en het land of de regio in te stellen. Op deze manier selecteert u automatisch het menu Onderhoud en vervolgens de optie Taal en land/regio instellen.
Titan.
Titan.book Page 9 Tuesday, March 4, 2003 9:12 AM Originelen en papier laden 3 U kunt kopieën maken van originelen op de glasplaat of in de automatische documentinvoer. U kunt ook afdrukken en kopiëren op een groot aantal verschillende papiersoorten van uiteenlopend gewicht en formaat en op transparanten. Let er echter op dat u altijd de juiste papiersoort kiest, dat het correct is geladen en dat het afdrukmateriaal niet beschadigd is.
Titan.book Page 10 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 3 Originelen in de automatische documentinvoer plaatsen In de automatische documentinvoer (ADF) van het apparaat kunt u maximaal 35 originelen van de volgende papiersoort plaatsen: • Gewoon papier 60 g/m2 tot 90 g/m2 (alleen langlopend papier) Alleen enkele vellen: • Real Estate-papier Kopiëren of faxen via de automatische documentinvoer 1 Plaats alle originelen met de afdrukzijde naar boven gericht in de automatische documentinvoer.
Titan.book Page 11 Tuesday, March 4, 2003 9:12 AM Originelen en papier laden De papierlade vullen Naslaggids 1 Verwijder (trek naar voren) de uitvoerlade en schuif de papierbreedtegeleider en de papierlengtegeleider naar de uiterste stand. 2 Schud het papier met een zijde op een vlak oppervlak zodat alle vellen goed zijn uitgelijnd, en controleer vervolgens of het papier aan de volgende eisen voldoet: – Het papier mag niet gescheurd, stoffig, gekreukeld, gekruld of aan de hoeken gevouwen zijn.
Titan.book Page 12 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 3 5 Plaats de uitvoerlade terug. 6 Schuif het verlengstuk van de uitvoerlade volledig uit. Zo voorkomt u dat er afgedrukt papier uit de lade valt. Enveloppen laden U kunt met het apparaat op twee manieren enveloppen afdrukken. Gebruik geen gladde of gebosseleerde enveloppen of enveloppen met klemmetjes of vensters. 12 • Als u maar één envelop wilt bedrukken, schuift u de envelop in de envelopinvoer.
Titan.book Page 13 Tuesday, March 4, 2003 9:12 AM Originelen en papier laden Schuif de papierbreedtegeleider tegen de enveloppen aan (zorg dat de enveloppen niet gebogen of gebold zijn). Let erop dat de enveloppen goed in de lade passen (vermijd een te volle lade). Raadpleeg de Help-functie van uw tekstverwerkingsapplicatie voor informatie over het opmaken van tekst voor afdrukken op enveloppen. Briefkaarten laden Volg de onderstaande procedure voor het laden van briefkaarten.
Titan.book Page 14 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 3 Fotopapier laden Als u fotopapier van 101,6 x 152,4 mm (4 x 6 inch) wilt laden, gebruikt u de volgende procedure. 1 Verwijder al het papier uit de papierlade en plaats de stapel kaarten zo ver mogelijk in de lade. Zorg ervoor dat de afdrukkant naar beneden is geplaatst. Als het fotopapier dat u gebruikt, geperforeerde lipjes heeft, laadt u het fotopapier zo dat de lipjes naar u toe liggen.
Titan.book Page 15 Tuesday, March 4, 2003 9:12 AM Originelen en papier laden papier Tips Banierpapier (kettingpapier) (werkt alleen met de afdrukfuncties) Banierpapier wordt ook computer- of kettingpapier genoemd. • Voordat u banierpapier laadt, verwijdert u al het papier uit de papierlade en vervolgens de uitvoerlade. Verwijder de uitvoerlade. Plaats het vrije uiteinde van het papier in de papierlade. • Gebruik papier van 75 g/m2 en waaier het papier uit voordat u het laadt.
Titan.book Page 16 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 3 Voor faxen: 16 1 Druk op Menu. 2 Druk op 5 en vervolgens op 4. Hiermee selecteert u het menu Basisfaxinstellingen en vervolgens Papierformaat. 3 Druk op totdat het gewenste formaat verschijnt en vervolgens op Enter om het formaat te selecteren.
Titan.
Titan.book Page 18 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 4 Snelheid of kwaliteit van het kopiëren verhogen Het apparaat heeft drie opties die de kopieersnelheid en -kwaliteit beïnvloeden. • Beste: levert op elke papiersoort afdrukken van de hoogste kwaliteit op en voorkomt het bandeneffect dat zich soms in effen vlakken voordoet. Met Beste verloopt het afdrukken iets langzamer dan bij de andere kwaliteitsinstellingen.
Titan.book Page 19 Tuesday, March 4, 2003 9:12 AM De kopieerfuncties gebruiken 2 Bij de optie Aangepast moet u op of drukken om de kopie te verkleinen of te vergroten. U kunt ook het percentage via het numerieke toetsenblok invoeren. 3 Druk op Start Kopiëren - Zwart of Start Kopiëren - Kleur. Kopieën lichter of donkerder maken De helderheid van de kopieën regelt u met Lichter/Donkerder. 1 Druk op Lichter/Donkerder. 2 Druk op om een kopie lichter te maken of op om een kopie donkerder te maken.
Titan.book Page 20 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 4 Instellingen wijzigen voor alle kopieertaken U kunt de meest gebruikte kopieerinstellingen als standaardinstellingen opslaan. Dit geldt voor zowel de opties Kopieerinstellingen in het menusysteem als de andere kopieerinstellingen op het bedieningspaneel. 1 Breng de gewenste wijzigingen aan in de opties voor de kopieerinstellingen. 2 Pas indien nodig de knopinstellingen in het kopieergebied aan. 3 Druk op Menu.
Titan.book Page 21 Tuesday, March 4, 2003 9:12 AM De kopieerfuncties gebruiken Een kopie op de pagina passen Selecteer Aan pagina aanpassen als u de kopie automatisch wilt aanpassen aan het papierformaat dat u hebt geladen. U kunt een kleine foto zo groot als het papier maken, zoals in de volgende afbeelding. Met Aan pagina aanpassen kunt u het ongewenst afkappen van tekst of het bijsnijden van afbeeldingen voorkomen.
Titan.book Page 22 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 4 4 Druk op totdat het gewenste fotoformaat wordt weergegeven en druk vervolgens op Enter. 5 Druk op als Hoeveel? verschijnt en selecteer het aantal afbeeldingen dat op de pagina past. U kunt kiezen uit 1 afbeelding of het maximumaantal dat op de pagina past. Bij enkele grotere formaten wordt niet gevraagd het aantal afbeeldingen op te geven. 6 Druk op Enter om het aantal foto’s te selecteren dat u op één pagina wilt afdrukken.
Titan.book Page 23 Tuesday, March 4, 2003 9:12 AM De kopieerfuncties gebruiken 4 Als u ook het verkleinings- of vergrotingspercentage wilt wijzigen, voert u via het toetsenblok een getal in en drukt u op Enter. Tip: Wilt u dit percentage niet wijzigen, dan drukt u op Enter nadat u de hoeveelheid margeverschuiving hebt geselecteerd. 5 Druk op Start Kopiëren - Zwart of Start Kopiëren - Kleur.
Titan.book Page 24 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 4 Tip: U kunt van een bestand op de computer een poster afdrukken. Zie Een poster afdrukken in de foto- en beeldbewerking Help voor meer informatie. 1 Plaats het origineel op de glasplaat. Tip: Voor het maken van posters kan de automatische documentinvoer (ADF) niet worden gebruikt. 2 Plaats het juiste papier in de hoofdlade. 3 Druk op Speciale Functies totdat Poster verschijnt. De optie Poster van 2 pagina’s breed is de standaardinstelling.
Titan.book Page 25 Tuesday, March 4, 2003 9:12 AM De kopieerfuncties gebruiken Een kopieertaak stoppen ` Als u een kopieertaak wilt stoppen, drukt u op Annuleren op het bedieningspaneel. Opties in het menu Kopieerinstellingen In het menu Kopieerinstellingen kunt u de volgende opties selecteren.
Titan.
Titan.book Page 27 Tuesday, March 4, 2003 9:12 AM De scanfuncties gebruiken 5 Scannen is het proces waarbij tekst en afbeeldingen naar een elektronisch formaat voor de computer worden geconverteerd. U kunt bijna alles scannen. Enkele voorbeelden: • tekstdocumenten; • f oto’s; • tijdschriftartikelen; • 3D-objecten (let op dat de glasplaat niet beschadigd raakt).
Titan.book Page 28 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 5 Naar bestemming scannen De scanknoppen op uw beeldapparaat geven u een snelle manier om foto's en documenten rechtstreeks naar een standaardbestemming te scannen die u hebt geselecteerd. Bijvoorbeeld naar uw favoriete grafisch programma of tekstverwerkingsprogramma. Als u geen standaardbestemming hebt geselecteerd, worden de gescande afbeeldingen naar de Photo & Imaging Gallery gescand.
Titan.book Page 29 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken 6 Met de apparaat kunt u: • papieren faxberichten verzenden en ontvangen • kleurenfaxberichten verzenden en ontvangen (het faxapparaat waarnaar het kleurenfaxbericht wordt verzonden, moet wel kleurenfaxberichten kunnen ontvangen) Een faxbericht verzenden Met de apparaat kunt u een papieren faxbericht (Legal, Letter of A4) via het bedieningspaneel verzenden.
Titan.book Page 30 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 Als u op 1 voor Ja drukt, wordt het document vanaf de glasplaat gescand. Drukt u op 2 voor Nee , dan verschijnt er een bericht op het bedieningspaneel dat u het origineel moet plaatsen en op Enter moet drukken. Nadat u het document hebt geplaatst, wordt het faxbericht verzonden. Een faxbericht verzenden met snelkiesvermeldingen U kunt voor veel gebruikte faxnummers snelkiesvermeldingen instellen.
Titan.book Page 31 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken Een faxbericht plannen U kunt een zwart-witfaxbericht zo plannen dat dit later op de dag wordt verzonden, bijvoorbeeld op tijden dat de telefoonlijn minder bezet is. Selecteer een enkele ontvanger of een groep als u het bedieningspaneel gebruikt. Opmerking: voordat u deze functie gaat gebruiken, moet u eerst de tijd en datum instellen.
Titan.book Page 32 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 Voor zowel de fax op de computer als de fax op de apparaat hebt u slechts één telefoonlijn nodig. Hierdoor kunt u beide faxvoorzieningen gebruiken zonder aansluitingen te hoeven wijzigen. Sluit de faxvoorziening op uw computer op de hieronder aangegeven wijze aan op de apparaat. 1 Sluit het snoer van de telefoon uit de telefoonaansluiting in de muur aan op aansluiting 1 van de apparaat.
Titan.book Page 33 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken Een faxbericht handmatig ontvangen Voordat u handmatig een faxbericht op het apparaat ontvangt, raden wij u aan originelen van de glasplaat te verwijderen. 1 Druk op de knop Automatisch antwoorden totdat het groene lampje niet meer brandt. Hiermee wordt de functie voor automatisch beantwoorden uitgeschakeld.
Titan.book Page 34 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 Rapporten handmatig genereren 1 Druk op Menu en vervolgens op 3. Hiermee selecteert u het menu Rapport afdrukken. 2 Druk op om door de volgende soorten rapporten te bladeren. – 1:Laatste transactie: geeft de status aan van het laatst verzonden faxbericht. – 2:Faxlogboek: drukt een lijst af met de 40 laatst ontvangen en verzonden faxberichten. – 3:Snelkieslijst: drukt een lijst af met nummers voor personen en groepen.
Titan.book Page 35 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken 2 Druk op om een faxbericht lichter te maken of op om dit donkerder te maken. Afhankelijk van de toets waarop u drukt, verplaatst de cirkel zich naar links of rechts. 3 Druk op Enter om de geselecteerde instelling te gebruiken. Een nummer automatisch opnieuw kiezen U kunt het apparaat zo instellen, dat deze een bezet of onbeantwoord nummer automatisch opnieuw kiest.
Titan.book Page 36 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 Automatische verkleining instellen Deze instelling bepaalt wat het apparaat doet als er een faxbericht binnenkomt dat te groot is voor het standaard papierformaat. Als deze instelling is ingeschakeld (de standaardinstelling), wordt de afbeelding zodanig verkleind dat deze op één pagina past. Als de instelling is uitgeschakeld, worden de gegevens die niet op de eerste pagina passen, op de volgende pagina afgedrukt. 1 Druk op Menu.
Titan.book Page 37 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken 5 Wanneer het belsignaal verschijnt dat de telefoonmaatschappij voor dit nummer heeft gereserveerd, drukt u op Enter. Tip: U kunt het beste Tweevoudige beltonen of Drievoudige beltonen gebruiken. Snelkiezen instellen U kunt faxnummers invoeren die u vaak gebruikt. U kunt de betreffende nummers vervolgens snel op het bedieningspaneel kiezen met de knop Snelkiezen of met One-Touch snelkiesknoppen.
Titan.book Page 38 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 3 Selecteer een van de volgende: – Als u het weergegeven nummer wilt wissen, drukt u op Enter. – Om een ander nummer te selecteren drukt u op of totdat het gewenste snelkiesnummer verschijnt en drukt u vervolgens op Enter om het nummer te selecteren. Het papierformaat instellen Op het bedieningspaneel kunt u een papierformaat voor faxberichten kiezen. U kunt kiezen uit de papierformaten Letter, A4 of Legal. 1 Druk op Menu.
Titan.book Page 39 Tuesday, March 4, 2003 9:12 AM De faxfuncties gebruiken De koptekst van het faxbericht instellen Volg de onderstaande stappen voor het invoeren van uw naam en faxnummer via het bedieningspaneel. 1 Druk op Menu. 2 Druk op 5 en vervolgens op 2. Hiermee selecteert u het menu Basisfaxinstellingen en vervolgens de optie Faxkoptekst.
Titan.book Page 40 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 6 • Als u een teken, zoals @, wilt invoeren, drukt u meerdere malen op Symbolen (*) om de lijst met beschikbare tekens te doorlopen. In deze lijst staan de volgende tekens: *, -, &, ., / (), ‘, =, #, @, _ en !. • Als u een vergissing hebt gemaakt, drukt u op om het verkeerd getypte teken te wissen, waarna u het juiste teken invoert. • Nadat u de tekst hebt ingevoerd, drukt u op Enter om de ingevoerde gegevens op te slaan.
Naslaggids 6:Instell. voor autom. rapporten 5:Zelftestrapport 4:Menuinstellingen 3:Snelkieslijst 2:Faxlogboek 1:Laatste transactie 3:Rapport afdrukken Druk op of om naar de gewenste instelling te gaan. Druk op Enter om de weergegeven instelling te selecteren. Druk op Menu om de menufuncties weer te geven.
Titan.
Titan.book Page 43 Tuesday, March 4, 2003 9:12 AM Het apparaat onderhouden 7 Volg de instructies in dit gedeelte op om ervoor te zorgen dat het apparaat optimaal blijft functioneren. Voer voor zover nodig de volgende onderhoudsprocedures uit. De glasplaat schoonmaken Als de glasplaat vuil is door bijvoorbeeld vingerafdrukken, vlekken of haren, werkt de printer minder snel en wordt de nauwkeurigheid van speciale functies, zoals Aan pagina aanpassen en Kopiëren, negatief beïnvloed.
Titan.book Page 44 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 7 De binnenkant van de klep schoonmaken Er kan zich stof ophopen op de witte documentbeschermlaag onder de klep van het apparaat. 1 Zet het apparaat uit, trek de stekker uit het stopcontact en til de klep omhoog. 2 Maak de witte documentbeschermlaag schoon met een vochtige zachte doek of spons (warm water) met zachte zeep. 3 Was de beschermlaag voorzichtig om vuil los te maken. Schrob niet over de beschermlaag.
Titan.book Page 45 Tuesday, March 4, 2003 9:12 AM Omgaan met inktpatronen Voordat u een inktpatroon vervangt of schoonmaakt, dient u eerst de namen van de onderdelen te kennen en te weten hoe u met de inktpatroon moet omgaan. • HP zwart (nr. 56) • HP kleur (nr. 57) • HP kleur (foto) (nr. 58) Koperkleurige contactpunten Inktsproeiers onder tape Plastic tape (moet vóór de installatie worden verwijderd) Raak de koperkleurige contactpunten en de inktsproeiers niet aan.
Titan.book Page 46 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 7 De inktpatronen vervangen Als een inktpatroon aan vervanging toe is, verschijnt een bericht op het bedieningspaneel. U moet waarschijnlijk ook een zwarte-inktpatroon vervangen door een fotopatroon als u foto’s in fotokwaliteit wilt afdrukken. 1 Zet het apparaat aan en open de toegangsklep voor de wagen met inktpatronen. Trek hiervoor de klep aan de handgreep omhoog totdat de klep in de geopende stand is vergrendeld.
Titan.book Page 47 Tuesday, March 4, 2003 9:12 AM 3 Als u de zwarte-inktpatroon verwijdert om een patroon (nr. 58) voor fotoafdrukken te installeren, bewaart u de zwarte-inktpatroon in de daarvoor bestemde beschermende verpakking. 4 Haal de inktpatroon uit de verpakking en de plastic tape van de inktsproeiers door aan het roze lipje te trekken. Let hierbij op dat u alleen het zwarte plastic aanraakt. Let op! Raak de koperkleurige contactpunten en inktsproeiers niet aan. Breng de tape niet opnieuw aan.
Titan.book Page 48 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 7 Patronen uitlijnen Telkens wanneer u een inktpatroon installeert of vervangt, verschijnt op het bedieningspaneel van het apparaat een bericht waarin u wordt gevraagd de inktpatroon uit te lijnen. Als u de inktpatronen uitlijnt, weet u zeker dat de afdrukkwaliteit optimaal is. U lijnt als volgt de inktpatronen uit: 1 Druk op Enter op het bedieningspaneel. Er wordt een pagina met patronen afgedrukt. De patronen worden automatisch uitgelijnd.
Titan.book Page 49 Tuesday, March 4, 2003 9:12 AM 1 Druk op Menu. 2 Druk op 7 en vervolgens op 3. Hiermee selecteert u Onderhoud en vervolgens Fabrieksinstellingen herstellen. De fabrieksinstellingen worden hersteld. De tijd voor de PowerSave-modus instellen De lamp in het apparaat blijft een bepaalde tijd branden, zodat het apparaat onmiddellijk klaar is om op uw opdrachten te reageren.
Titan.
Titan.book Page 51 Tuesday, March 4, 2003 9:12 AM Aanvullende installatie-informatie 8 In dit gedeelte wordt aangegeven wat u moet doen met berichten die worden weergegeven tijdens de installatie, hoe u de verbinding tussen de computer en het apparaat moet instellen en hoe u de -software kuntinstalleren en verwijderen. U vindt de standaard installatie-instructies op de Setup-poster. Bewaar deze poster omdat u deze naderhand nog nodig kunt hebben.
Titan.book Page 52 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 8 Als het bericht “Nieuwe hardware gevonden” verschijnt (Windows 98, 2000, XP of ME) Als u het apparaat installeert en rechtstreeks op de computer aansluit voordat u de software installeert, kan een van de volgende berichten worden weergegeven: Voorkomen van fouten tijdens de installatie Om fouten te voorkomen kunt u het beste de software installeren voordat u het apparaat op de computer aansluit.
Titan.book Page 53 Tuesday, March 4, 2003 9:12 AM Aanvullende installatie-informatie Als de computer niet kan communiceren met het apparaat Als u geen communicatie tot stand kunt brengen tussen de computer en het apparaat (bijvoorbeeld de gele foutdriehoek in het apparaat statuspictogram), probeert u dezelfde handelingen uit te voeren die onder Als het bericht “Nieuwe hardware gevonden” van Microsoft niet wordt weergegeven op pagina 51 worden uitgelegd.
Titan.book Page 54 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 8 Het apparaat aansluiten op de computer Het apparaat ondersteunt HOT-swapping. Dit houdt in dat u het apparaat kunt aansluiten terwijl de computer en apparaat zijn ingeschakeld. USB-poort aansluiten Het aansluiten van uw computer op het apparaat met een USB-kabel is vrij eenvoudig. U sluit het ene uiteinde van de USB-kabel aan op de USB-connector van uw computer en het andere uiteinde op de USB-connector aan de achterzijde van apparaat.
Titan.book Page 55 Tuesday, March 4, 2003 9:12 AM Aanvullende installatie-informatie Software verwijderen en opnieuw installeren Verwijder de apparaat programmabestanden dus niet van de vaste schijf. U dient de programmabestanden te verwijderen met behulp van het hulpprogramma dat in de programmagroep apparaat staat.
Titan.
Titan.book Page 57 Tuesday, March 4, 2003 9:12 AM Technische informatie 9 Systeemvereisten De volgende specificaties kunnen zonder voorafgaande kennisgeving worden gewijzigd.
Titan.book Page 58 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 9 Papierspecificaties Capaciteit van papierladen Soort Papiergewicht Invoerlade1 Uitvoerlade2 Gewoon papier 16 tot 24 lb. (60 tot 90 g/m2) 100 50 zwart, 20 kleur Legal-papier 20 tot 24 lb. (75 tot 90 g/m2) 100 50 zwart, 20 kleur Kaarten 110 lb. index max (200 g/m2) 40 10 Enveloppen 20 tot 24 lb. (75 tot 90 g/m2) 15 10 Banieren 16 tot 24 lb. (60 tot 90 g/m2) 20 20 of minder Transparanten N.v.t.
Titan.book Page 59 Tuesday, March 4, 2003 9:12 AM Technische informatie Soort Formaat Kaarten 76,2 x 127 mm (3 x 5 inch) 101,6 x 152 mm (4 x 6 inch) 127 x 203,2 mm (5 x 8 inch) A6: 105 x 148,5 mm Hagaki-briefkaart: 100 x 148 mm Labels Letter: 216 x 279 mm (8,5 x 11 inch) A4: 210 x 297 mm Aangepast 76,2 x 127 mm tot maximaal 216 x 356 mm (3 x 5 inch tot maximaal 8,5 x 14 inch) Automatische documentinvoer (ADF) Gewoon papier 60 tot 90 g/m2 (16 tot 24 lb.
Titan.book Page 60 Tuesday, March 4, 2003 9:12 AM Hoofdstuk 9 Specificaties voor afdrukmarges Boven (invoerkant) Onder Links (uitvoerkant)1 Rechts U.S. Letter 1,8 mm 11,7 mm 6,4 mm 6,4 mm U.S. Legal 1,8 mm 11,7 mm 6,4 mm 6,4 mm U.S. Executive 1,8 mm 11,7 mm 6,4 mm 6,4 mm ISO A4 1,8 mm 11,7 mm 3,4 mm 3,4 mm ISO A5 1,8 mm 11,7 mm 3,4 mm 3,4 mm JIS B5 1,8 mm 11,7 mm 3,4 mm 3,4 mm U.S. No.
Titan.book Page 61 Tuesday, March 4, 2003 9:12 AM Technische informatie • Aan pagina aanpassen, Poster, Meerdere per pagina • Maximaal 19 zwart-witkopieën per minuut, 14 kleurenkopieën per minuut • De kopieersnelheid is afhankelijk van de complexiteit van het document Snelheid (ppm) Afdrukresolutie (dpi) Scanresolutie (dpi)1 Modus 0.8 1200 x 12002 2400 x 1200 0.
Titan.
Titan.book Page 63 Tuesday, March 4, 2003 9:12 AM Technische informatie Richtlijnen voor milieuvriendelijke producten Milieubescherming Dit product is ontworpen om het milieu zo min mogelijk te belasten. Ozonafgifte Dit product produceert geen waarneembaar ozongas (O3).
Titan.
Titan.
Titan.
Titan.
Titan.
Titan.book Page 75 Tuesday, March 4, 2003 9:12 AM www.olivettitecnost.com © Hewlett-Packard Company 2003 Gedrukt in Italië.