Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
9
Pre-Set MFT Confi gurations
On/Off Control, P-4000… (J…)
Application
How the MFT actuator performs is determined by the configuration (P-10001,
A01). The old generation actuators used a P-code (P-10001). The new
generation actuators use a shorter 3 digit code. This shorter code is displayed
on the reorder number.
P-4000… configuration types are used for on/off control outputs. The
configuration allows for service replacement of on/off actuators when a true on/
off actuator is not available.
In addition the MFT actuator offers additional functionality in the on/off mode,
such as configuration P-40003 with minimum position and 2 to 10 VDC
feedback.
Wiring Diagram
(1) Common
(2) Hot
(3) Y Input
(5) U Output
Line
Volts
24 VAC/DC Transformer
CCW CW
…MFT
a
Position
Feedback VDC
(+)
(–)
pjy
W043
On/Off
Spring Return Actuators
AFX24-MFT(-S) 180 in-lb
AF24-MFT(-S) US 133 in-lb
NFX24-MFT(-S) 90 in-lb
NF24-MFT US 60 in-lb
LF24-MFT(-S) US 35 in-lb
TF24-MFT US 18 in-lb
Non-Spring Return Actuators
GMX24-MFT 360 in-lb
AMX24-MFT 180 in-lb
NMX24-MFT 90 in-lb
LMX24-MFT 45 in-lb
AMQX24-MFT 140 in-lb
NMQX24-MFT 70 in-lb
LMQX24-MFT 35 in-lb
AHX24-MFT 101 lbf
AHQX24-MFT-100 44 lbf
LHX24-MFT 34 lbf
LHQX24-MFT-100 22 lbf
LUX24-MFT 27 in-lb
Select Configuration
Configuration Code Input Range Position Feedback Running Time Torque % Adaptation
On/Off Control
P-40001 J01 On/Off 2.0 to 10.0 VDC 75 100* MANUAL
P-40002 J02 On/Off 2.0 to 10.0 VDC 150 100 MANUAL
P-40003 J03 On/Off 2.0 to 10.0 VDC 75 100* MANUAL
P-40004 J04 On/Off 0.5 to 5.0 VDC 100 100 MANUAL
P-40005 J05 On/Off 0.5 to 10.0 VDC 100 100 MANUAL
* Reduced torque in Spring Return (see page 19)
M40035 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.