Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA

2-10

PC-Tool User Manual

for Damper and Valve Actuators

An existing value for Mid is automatically adapted when Min and Max are entered: If you enter

Min, Mid is always larger than or equal to this input value. If you enter Max on the other hand,

Mid is always less than or equal to this value.

Examples of settings for control signal Y / feedback U5

Control signal Y: 3...8 V min: 30%, max : 70%

Feedback U5 : 2...7 V start: 20%, stop: 90%

Y/U5

[V]

Open 100%

50%

Closed 0%

Position

Running time

In seconds Time needed to pass through the range limited by Min and Max (the valid

range of values for the running time depends on the actuator type and the

passed-through range).

Note: For actuators with the "constant speed" operating mode, the speed does not depend on

the range passed through. The running time refers to a fixed angle of 95° for rotary actuators or

a fixed stroke of 100 mm for linear actuators.