Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
4-7
PC-Tool User Manual
for ePIV Series Actuators
M40035 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
2.4 Function Test
The opening and closing of the valve is checked during the
function test.
The actuator first moves in accordance with the synchronisation position to the
mechanical end stop. If the range is set to "adapted", then the other end stop will
be approached; if it is set to "programmed", on the other hand, then it will move to
the programmed range limit.
Click on the "Test" button in the Service tab. The normal display will then be cov-
ered over by the test window.
Display of test progress and test report
Click on the "Start Test" button.
The progress and the current position will be displayed continuously.
The test report contains
 information concerning the project,
 the identification of the EPIV controller,
 a list of the error messages in effect before the start of the test,
 the test steps and the test result,
 the current controller settings.