Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
5
Non-Spring Return Actuator Product Range
Multi-Function Technology
Custom
Options
Running
Time
Power
Supply
Power
Consumption
Control
Input
Control Input
Position
Feedback
Auxiliary
Switches
NEMA
4X
10 ft (3m) cable / 16 ft (5m) cable Terminal strip NEMA 1/IP20 / 2/IP54 Motor Drive Range, (Default) …-MFT Fully Programmable 24 VAC +/- 20%, VDC +/- 10% 100 to 240 VAC VA Rating Wattage Running (Holding) 2-10 VDC (Default) 4-20 mA (w/500 Ω Resistor) Honeywell Series 90, 0-135 Ω On/Off Floating Point Start and Span adj., Start 0.5 to 30 VDC, Span 2.5 to 32 VDC PWM adj., 0.02 to 50.0 Seconds 2-10 VDC (Default) VDC Variable, Start 0 to 8, Span 2 to 10 VDC Add-on Enclosure (Part No. +N4 or +N4H)
GMX Series 360 in-lb [40 Nm]
Approx. 90 sq. ft.**
GMX24-MFT†
●
75-300 (150)
●
7 4.0 (1.5)
● ●●●●●● ●
GMX24-MFT95†
●
100-300 (150)
●
7 4.0 (1.5)
●●●●
AMX Series 180 in-lb [20 Nm]
Approx. 45 sq. ft.**
AMX24-MFT
●
90-300 (150)
●
6 3.5 (1.3)
● ●●●●●● ● ●
AMCX24-MFT
●
35-120 (35)
●
6 3.5 (1.3)
● ●●●●●● ●
AMX24-MFT95
●
90-150 (150)
●
6 3.5 (1.3)
●●●●
AMQ Series 140 in-lb [16Nm] AMQX24-MFT
●
7-15 (7)
●
18 12 (1.5)
● ●●●●●● ●
NMX Series 70 in-lb [8 Nm]
Approx. 22 sq. ft.**
NMX24-MFT
●
45-150 (150)
●
6 3.5 (1.3)
● ●●●●●● ● ●
NMX24-MFT95
●
45-150 (150)
●
6 3.5 (1.3)
●●●●
NMCX24-MFT
●
20-75 (20)
●
5 3.0 (0.6)
●●●●
NMQ Series 70 in-lb [8Nm] NMQX24-MFT
●
4-20 (4)
●
18 12 (1.5)
● ●●● ●● ●
LMX Series 35 in-lb [4 Nm]
Approx. 11 sq. ft.**
LMX24-MFT
●
35-200 (150)
●
5 2.5 (1.2)
● ●●●●●● ●
LMX24-MFT95
●
35-150 (150)
●
5 2.5 (1.2)
●●●●
LMQ Series 35 in-lb [4Nm] LMQX24-MFT
●
2.5-10 (2.5)
●
18 12 (1.5)
● ●●● ●● ●
AHX Series 101 lbf [450 N Force]
4” or 8” stroke
AHX24-MFT*
●
150*
●
6 3.5 (1.3)
● ●●●●●●
AHQ Series 44 lbf [200 N Force]
AHQX24-MFT-100
●
7-30 (7)*
●
18 12 (1.5)
● ●●●●●●
LHX Series 34 lbf [150 N Force]
4” or 8” stroke
LHX24-MFT*
●
75-150 (150)*
●
5 2.5 (1.2)
● ●●●●●●
LHQ Series 22 lbf [100 N Force]
LHQX24-MFT-100
●
3.5-15 (3.5)*
●
18 12 (1.5)
● ●●● ●●
LUX Series 27 in-lb [3 Nm]
LUX24-MFT
●
75-150 (150)
●
5 2.5 (1.2)
● ●●●●●●
* The LH and AH linear series actuators come in three different stroke lengths [4, 8 or 12 in]. The part number is followed by -100, -200, -300 respectively. The default
running time is 150 seconds per 4 inches [100 mm]. Running time is adjustable depending on model:
LH Series: 70-270, 140-540, 200-810, on the -100, -200, -300 models respectively.
AH Series: 150-600, 300-1200, 450-1800, on the -100, -200, -300 models respectively.
LHQ and AHQ available in 4 inch version only.
† Dual mounting on a single shaft is possible for higher torque (-3 and -SR wired in parallel), (-MFT wired Master-Slave). Please call Belimo customer service for details.
** Parallel blade without edge seals and 1000 FPM face velocity.
M40035 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.