Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
1-32
PC-Tool User Manual
NOTE: USE THIS SECTION ONLY IF THE ACTUATORS (S) MP ENABLED.
3.8 Parameterizing limited lots
You can parameterize several identical actuators with the function "Parameterize Limited Lots".
The number depends on the power of the voltage supply.
To parameterize limited lots, save the parameter set to be programmed in a file.
With one parameter set, you can only program actuators from the same actuator family (e.g.
MFT), i.e. the parameter set used must match the actuator family.
Connect the devices according to the following wiring diagram (for further wiring diagrams, see
clause 4.4 Typical wiring diagrams):
Speisung
Power Supply
AC/DC 24V
24 V
GND
....A-MP
…D2-MP
...MFT(2)
MP
GND
....A-MP
…D2-MP
...MFT(2)
....A-MP
…D2-MP
...MFT(2)
....A-MP
…D2-MP
...MFT(2)
....A-MP
…D2-MP
...MFT(2)
....A-MP
…D2-MP
...MFT(2)
ZK2-GEN
white/weiss = GND
blue/blau = 24V
green/grün = MP
Belimo
PC-Tool
USB
USB
RJ11 (6/4)
Select the desired MP-Channel and click the symbol "Parameterize Limited Lots".
Option Click with the right mouse button on the MP-Channel and select Parameterize Limited Lots. Or
select the MP-Channel ` Parameterize Limited Lots in the main menu.
M40035 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.