Brochure

ManualsBrandsBelimo ManualsDampersSpring Return, Multi-Function Technology Valve Actuator, 24 VAC

100

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA

1-51

PC-Tool User Manual

Error message Description

Could not find the VRP-M Tool executable.

Would you search for it now?

Concerns VRP-M controller. The corresponding program could not be

found at the location specified in the PC-Tool options.

Configure the path in the options (menu Tools/PC-Tool options in VRP-

M).

Could not find PC-Tool V2.1. Would you search

for it now?

Affects VAV actuators. The old version of the program could not be

found at the location specified in the PC-Tool options.

Error while loading project. (Note the detailed instructions with the message regarding the reason

for the error.)

MP-Command ... failed. Conflict between actuator and program. The program library (belipp.dll)

may not be up-to-date. MP command could be password-protected.

MP-Channel was closed The MP-Channel was closed during an asynchronously running

function.

Not all data written to the device. Communication problem during writing of the parameter data, possibly

due to bus jam. Check the connection and addressing of the actuators.

An MP command is password-protected or the actuator is not familiar

with the command.

Could not read all data from the device. Communication problem while the parameter data was read, possibly

due to bus jam. Check the connection and addressing of the actuators.

Not all fields have valid values! Can't write data One or more input values in the "Configuration" tab is not valid. Look

for a flashing exclamation mark. If you move the mouse pointer to the

exclamation mark, an explanatory text (tooltip) with the valid range of

values will usually appear.

OEM or BELIMO password necessary. Please

contact OEM-Manufacturer

Parameters on the actuator can be protected with a password against

changes. A password is necessary to overwrite them.

Parameter file contains no series number When setting the parameters of small batches, the actuator family is

checked by means of the serial number. The parameter file is old or has

been changed manually.

Error opening configuration file (Note the detailed instructions with the message regarding the reason

for the error.)

Error storing configuration file (Note the detailed instructions with the message regarding the reason

for the error.)

Plausibility check: Failed. Please check the

configuration dialog for further information.

Testing is not started if there are errors in the configuration.

Problems opening the MP-Channel "...". Error at the interface. Check the communication parameters and the

cabling.

Sending ... to ... returned error ... Conflict between actuator and program. The program library (belipp.dll)

may not be up-to-date.

Wrong format of serial number You have made a typing error while manually entering the serial

number. Check the notation of the serial number.