Mechanical Accessories K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc. We’ll help solve any application problem with a wide range of accessories and unparalleled customer service. The Belimo Difference ● Customer Commitment. Extensive product range. Competitive project pricing. Application assistance. Same-day shipments. Free technical support. Five year warranty. ● Low Installation and Life-Cycle Cost. Easy installation. Accuracy and repeatability.
Crankarm Adaptor Kits Shaft Adaptors Rotation Limiters Housigs Miscellaneous K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
AF/NF Accessories Clamps / Position Indicators / Rotation Limiters K4 US Clamp. Fits shafts 3/8" to 3/4". K4-1 US Jackshaft Clamp. Fits jackshafts up to 1.05". K4-2 US Standard Clamp. Fits shafts 1/2" to 1.05". K4-H Hex Shaft clamp. Fits hex shafts 3/8” to 5/8”. IND-AF2 Damper Position Indicator. For damper position indication in short shaft installations. ZDB-AF2 US US Angle of Rotation Limiter for AF/NF actuators. Includes IND-AF2. KH-AFV V-Bolt Kit allows for direct coupling with KH-LF.
LF Accessories Clamps / Position Indicators / Rotation Limiters K6 US Clamp. Fits shafts 3/8" to 1/2". K6-1 Clamp. Fits shafts 1/2" to 3/4". IND-LF Damper Position Indicator ZDB-LF Angle of Rotation Limiter for LF actuators KH-LFV V-Bolt Kit allows direct coupling with KH-LF. Contains V-Bolt and 2 nuts. Shaft Adaptors / Extensions ZG-LMSA-1 Shaft Adaptor (See LM Accessories) AV6-20 Shaft Extension. (See LM Accessories) AV8-25 Shaft Extension. For damper operating shafts. Approx.
TF Accessories Clamps / Position Indicators / Rotation Limiters IND-TF Damper Position Indicator ZDB-TF Angle of Rotation Limiter for TF actuators. Shaft Adaptors / Extensions AV6-20 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. Non-Direct Mounting ZG-TF112 Crankarm Adaptor Kit. For more information see page 325. ZG-TF2 Crankarm Adaptor Kit. For more information see page 326. KH-TF US Crankarm.
GM Accessories Clamps / Position Indicators / Rotation Limiters K-GM20 Reversible Clamp. Fits shafts up to 1.05". Shaft Adaptors AV8-25 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. The shaft adaptors listed below may be used with GM actuators. For more information see page 329. ZG-JSA-1 ZG-JSA-2 ZG-JSA-3 Non-Direct Mounting ZG-GMA Crankarm Adaptor Kit For more information see page 322.
AM Accessories Clamps / Position Indicators / Rotation Limiters K-AM25 Standard Reversible Clamp. Fits shafts up to 1.05". K-SA Reversible Clamp. Fits shafts up to 3/4". Non-Direct Mounting ZG-NMA Crankarm Adaptor Kit For more information see page 323. AH-25 Crankarm Shaft Adaptors / Extensions AV8-25 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. The shaft adaptors listed below may be used with AM actuators.
NM Accessories Clamps / Position Indicators / Rotation Limiters K-AM25 Standard Reversible Clamp. Fits shafts up to 1.05". K-NA Reversible Clamp. Fits shafts up to 3/4". Non-Direct Mounting ZG-NMA Crankarm Adaptor Kit For more information see page 323. AH-25 Crankarm Shaft Adaptors / Extensions ZG-NMSA-1 Short Shaft Extension AV8-25 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. K20901 - 01/09 - Subject to change.
LM Accessories Clamps / Position Indicators / Rotation Limiters K-LM20 Clamp. Fits shafts up to 3/4". K-LM16 Standard Clamp. Fits shafts up to 5/8". K-LM13 Clamp. Fits shafts up to 1/2". K-LM10 Clamp. Fits shafts up to 3/8". Shaft Adaptors / Extensions ZG-LMSA Shaft Extension ZG-LMSA-1 Shaft Extension AV6-20 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. Housings The housings listed below may be used with LM actuators.
AH, LH and LU Accessories AH/LH Accessories Crankarms / Ball Joints / Push Rods KH6 Universal Crankarm (For more information see Universal Accessories). KH8 Universal Crankarm (For more information see Universal Accessories). KG6 Ball Joint (Zinc Plated) (For more information see Universal Accessories). KG8 Ball Joint (Galvenized) (For more information see Universal Accessories). KG10 Ball Joint (Zinc Plated) (For more information see Universal Accessories).
Universal Accessories Universal Crankarms KH6 Zinc plated steel. Slot width 1/4” (6.2mm). For damper shafts: 3/8” to 11/16” dia. (10 to 18mm) or 3/8” to 9/16” sq. (10 to 14mm). Uses KG6 Ball Joint. Dimensions (Inches [MM]) KH8 Zinc plated steel. Slot width 21/64” (8.2mm). For damper shafts: 3/8” to 11/16” dia. (10 to 18mm) or 3/8” to 9/16” sq. (10 to 14mm). Uses KG8 or KG10A Ball Joint. Ball Joints KG6 For KH6 Universal Crankarm. Zinc plated steel. For 5/16” dia. rod (8mm).
ZG-102 Multiple Actuator Mounting Bracket For GM and AF Series Actuators Application The ZG-102 multiple actuator mounting bracket is designed for cases where it is necessary to mount two actuators to one shaft to provide extra torque. The dual mounting bracket is typically used with the AF and GM series actuators. This is due to the fact that each of these series are the highest torque range available. Figures A and B demonstrates two different mounting configurations using the ZG-102 mounting bracket.
ZG-AF108 Crankarm Adaptor Kit For AF and NF Series Actuators Application The ZG-AF108 Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-AF108 Crankarm Adaptor Kit Mounting Positions for Typical Replacements Barber Colman™ MA Type -- Vertical Barber Barber Colman™ Colman™ MA MA Type Type - Vertical Vertical Barber Colman™ MA Type -- Horizontal (left) Barber Barber Colman™ Colman™ MA MA Type Type - Horizontal Horizontal (left) (left) Barber Colman™ MA Type -- Horizontal (right) Barber Barber Colman™ Colman™ MA MA Type Type - Horizontal Horizontal (right) (right) K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZG-106 and ZG-107 Universal Mounting Brackets For AF and NF Series Actuators Application The ZG-106 and ZG-107 Universal Mounting Brackets are designed for applications where the actuator cannot be mounted directly to the damper shaft. They may be used for outside or inside the duct mounting. The ZG-106 and ZG-107 is provided with hole patterns to mount the NF and AF series actuators in either a horizontal or vertical position to meet space requirements.
ZG-AF US Crankarm Adaptor Kit For AF and NF Series Actuators Application ZG-AF US The ZG-AF US Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-GMA Crankarm Adaptor Kit For GM Series Actuators Application The ZG-GMA Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-NMA Crankarm Adaptor Kit For AM and NM Series Actuators Application The ZG-NMA Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-100, ZG-101, ZG-103, ZG-104 Universal Mounting Brackets For AM, SM, GM, NF, and AF Series Actuators ZG-100 Universal Mounting Bracket* (Inches [mm]) ZG-101 Universal Mounting Bracket* (Inches [mm]) Material 12 GA Galvanized Weight 5.6 lbs. (2.5 kg) Material 12 GA Galvanized Weight 7.7 lbs. (3.5 kg) ZG-104 Universal Mounting Bracket (Inches [mm]) K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc. ZG-103 Universal Mounting Bracket (Inches [mm]) Material 12 GA Galvanized Weight 2.
ZG-LF112 and ZG-TF112 Crankarm Adaptor Kits For LF and TF Series Actuators ZG-LF112 Crankarm Adaptor Kit For LF Series Actuators Application The ZG-LF112 Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-LF2 and ZG-TF2 Crankarm Adaptor Kits For LF and TF Series Actuators ZG-LF2 Crankarm Adaptor Kit For LF Series Actuators Application The ZG-LF2 Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-LFC114 Crankarm Adaptor Kits For LF Series Actuators Application The ZG-LFC114 Crankarm Adaptor Kit is designed for Trane voyager economizer actuator retrofit. ZG-LFC114 The ZG-LFC114 Crankarm Adaptor Kit includes: 1 Mounting Bracket 1 Shaft Adaptor 2 Bolts with Nuts 4 Female Spade Connectors Note: May require crankarm and ball joints Use when replacing these actuators K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZG-ECON1 and ECON2 Crankarm Adaptor Kits For LF and Series Actuators ZG-ECON1 Crankarm Adaptor Kit For LF Series Actuators Application The ZG-ECON1 Crankarm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
Jack Shaft Adaptors ZG-JSA-... To Adapt Hollow Jack Shafts to Fit Belimo Actuators Application The ZG-JSA jack shaft adaptors are designed to be inserted into hollow jack shafts which have an outside diameter greater than 3/4 inch and provide a 3/4 inch shaft for mounting Belimo actuators. Technical Data Jack Shaft Size Weight Material ZG-JSA-1 Outside diameter 1.00” Inside diameter 3/4” 1.3 lbs.
Weather Shields ZS-150 Weather Shield Application The ZS-100 weather shield provides moderate protection to actuators which are mounted outdoors. This product is not designed as a water tight enclosure. The weather shield will work with all damper actuators. Installation The ZS-100 weather shield is supplied disassembled. Supplying it in this manner makes it applicable to a wider range of field applications. It may be assembled with 2 sides, 2 ends and the cover to completely conceal the actuator.
ZS-260 Explosion-proof Housing For GM…, AM…, SM…, AF…, NF…, LF… Actuators Application The ZS-260 explosion-proof housing may be used with the GM…, AM…, SM…, AF…, NF…, LF… series actuators. This housing is not designed for direct coupling. UL and CSA; Class I, Division 1&2, Groups B, C, D, (NEMA 7), Class II, Division 1&2, Groups E, F and G, (NEMA 9), Class III, Hazardous (classified) Locations, outdoor application NEMA 4.
ZS-260 Explosion-proof Housing For GM…, AM…, SM…, AF…, NF…, LF… Actuators ZS-260 Shaft Thru Front Rear Shaft Location Plug 5 10 ZS-260 Mounting Instructions 1. Determine proper operating shaft location. Front 4 Bolt Housing Drive Shaft 2. Remove threaded plug from the hole in which the operating shaft will be mounted. Back 2 8 3. Install the anti-rotation strap, mounting plate, to the side of the housing where the operating shaft will be mounted. 4.
ZS-300 Protective Housing NEMA 4X, stainless steel, corrosion resistant enclosures for AM, GM, AF, and NF actuators ZS-300 NEMA 4X Housing For AM, GM, AF, NF, LF Series Actuators Application The ZS-300 (-1) NEMA 4X enclosures may be used with GM, AM, AF, NF and LF Belimo actuators. They are intended for use primarily to provide protection against corrosion, windblown dust and rain, splashing water, hose-directed water; undamaged by the formation of ice on the enclosure.
ZS-300 (-1, -5) NEMA 4X, stainless steel, corrosion resistant enclosures for AM, GM, AF, and NF actuators ZS-300 Mounting Instructions 1. The damper operating shaft should extend approximately 1-1/2 inches from the damper assembly or duct side. Mount the drive shaft/coupler to the damper operating shaft . Fasten the coupler to the damper operating shaft by tightening the two 3/8 inch square head set screws . ➀ ➂ ➁ 2. Determine the housing mounting orientation for the application. 3.
