Brochure

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA

316

Universal Crankarms

KH6 Zinc plated steel. Slot width 1/4” (6.2mm).

For damper shafts:

3/8” to 11/16” dia. (10 to 18mm) or

3/8” to 9/16” sq. (10 to 14mm).

Uses KG6 Ball Joint.

KH8 Zinc plated steel. Slot width 21/64” (8.2mm).

For damper shafts:

3/8” to 11/16” dia. (10 to 18mm) or

3/8” to 9/16” sq. (10 to 14mm).

Uses KG8 or KG10A Ball Joint.

Ball Joints

KG6 For KH6 Universal Crankarm. Zinc plated steel.

For 5/16” dia. rod (8mm).

The KG6 ball joint is only recommended

up to 70 in-lbs. (8Nm)

KG8 For KH8 Universal Crankarm

Galvanized steel. 90° angle.

For 5/16” dia. rod (8mm).

KG10A Zinc Plated Steel

Used with following crankarms:

KH8 = 5/16” (8mm)

Push Rods

SH8 For KG6 and KG8 Ball Joints. 36” length, 5/16” dia.

SH10 For KG10 Ball Joints. 36” length, 3/8” dia.

Damper Clips

ZG-DC1 Mounts to damper blades – 3.5”

ZG-DC2 Mounts to damper blades – 6”

The ZG-DC1 and ZG-DC2 damper clips are

designed to mount to damper blades and work as

crankarms in damper linkage applications. The

ZG-DC1 is designed to be used in applications

where the actuator is located in front of the

damper. The ZG-DC2 is designed to be used when

the actuator is located above or below the damper.

Universal Accessories

ZG-DC2

ZG-DC2 clip

ZG-AF US

ZG-DC1

ZG-DC1 clip

ZG-106 or

ZG-107 with KH-AF

Dimensions (Inches [MM])