USER GUIDE AX3200 DUAL-BAND GIGABIT WiFi 6 ROUTER Model RT3200
Contents Product Overview .........................................................................................................3 Front .................................................................................................................................................................... 3 Back ..................................................................................................................................................................... 4 Setting Up: Basics .............
Product Overview Front Power light-Blinks white while router is starting up and during WPS pairing. Blinks yellow if WPS pairing fails Internet status light—Is solid white when connected to the internet and solid yellow when not connected.
Back Wi-Fi Protected Setup™ (WPS) button (1)-----Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. The light under the button will blink while WPS pairing is active. Reset button (2)—Press and hold for until the power LED starts flashing to reset the router to factory settings. Ethernet ports (3)------Connect Ethernet cables (also called network or internet cables) to these Fast Ethernet (10/100/1000) ports and to other wired devices on your network.
Setting Up: Basics Where to find more help In addition to this user guide, you can find help at Belkin.com/support/RT3200(documentation, downloads, FAQs, technical support, live chat, forums) Note—Licenses and notices for third party software used in this product may be viewed on http://www.belkin.com/support/license/. Please contact http://www.belkin.com/support/gplcodecenter/ for questions or GPL source code requests. How to install your router 1.
. Once you are finished with setup, please be sure to register your router so we can keep you informed security updates, product recalls and other things that will improve your experience.
Advanced Configuration How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility. Make sure you are connected to the router, open a web browser and enter http://myrouter.local in a web browser or go to 192.168.1.1. The router will prompt you for a password. If you changed the password during setup, enter the new password. Click LOGIN. If you didn’t change the password, or skipped setup altogether, the default password is ‘‘admin’’.
Basic Router Settings This screen allows you to change the router’s basic configuration.
Language Select your language—To change language, select one from the drop-down menu. The language of the browser-based utility will change within five seconds.
Internet Setup The Internet Setup section configures the router to your internet connection. This information can be provided by your Internet Service Provider (ISP). Internet Connection Type—Select the type of internet connection your ISP provides from the dropdown menu. • Automatic Configuration – DHCP (default) Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.
• PPPoE Select if you have a DSL connection and your ISP uses Point-to-Point Protocol over Ethernet (PPPoE). • PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, select Obtain an IP Address Automatically. If you are required to use a fixed IP address to connect to the internet, select Specify an IP Address and configure the options that appear.
Basic Wireless Settings 5GHz Network Mode-----Select the wireless standards your network will support. • Mixed (default) Keep the default if you have Wireless-A, Wireless-N, Wireless-AC, or Wireless-AX devices in your network. • Wireless-AC Mixed Select if you have Wireless-A, Wireless-N, or Wireless-AC devices in your network. • Wireless-A Only Select if you have only Wireless-A devices. • Wireless-N Only Select if you have only Wireless-N devices.
2.4GHz Network Mode-----Select the wireless standards your network will support. • Mixed (default) Keep the default if you have Wireless-B, Wireless-G, Wireless-N 2.4GHz devices in your network. • Wireless-B/G Only Select if you have Wireless-B, Wireless-G devices in your network. • Wireless-B Only Select if you have only Wireless-B devices. • Wireless-G Only Select if you have only Wireless-G devices. • Wireless-N Only Select if you have only Wireless-N 2.4G devices.
SSID Broadcast Keep the default, Enabled, to broadcast the router’s SSID. When wireless clients survey the local area for wireless networks to associate with they will detect the SSID broadcast by the router. Attempting to hide your Wi-Fi name does not make your Wi-Fi more secure. Anyone truly interested in accessing your network can find it even if you turn off this feature. If you still do not want to broadcast the router’s SSID, select Disabled.
Wireless Security The router offers the following wireless security options: WPA2/WPA3 Personal, WPA2 Personal, WPA2 Enterprise, WPA3 Personal, WPA3 Enterprise (WPA stands for Wi-Fi Protected Access.) WPA3 is the strongest security option. Security Option Settings WPA2 Personal If you select WPA2 Personal, each device in your wireless network MUST use WPA2 Personal and the same passphrase.
Troubleshooting You can find more help from our award-winning customer support at Belkin.com/support/RT3200. Your router was not successfully set up If you could not complete setup in the browser-based interface, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin until the power light on the front of the router turns off and starts blinking (about 10 seconds). Type 192.168.1.1 in a browser to try setup again.
Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router: • Make sure that an ethernet or internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet. • Make sure that your modem is connected to power and is turned on.
Cannot access your router message To access your router, you must be connected to your own network. If you currently have wireless internet access, the problem may be that you have accidentally connected to a different wireless network. To fix the problem on Windows computers, do the following*: 1. On your Windows desktop, click on the wireless icon in the system tray. A list of available networks will appear. 2. Click your own network name. Click Connect.
To fix the problem on Mac computers, do the following: 1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. 2. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Belkin router, Damaged_Beez2.4 in this example, is shown selected. 3. Click the wireless network name of your Belkin router (Damaged_Beez2.4 in the example). 4.
To restart your router using the power cord, do the following: 1. Disconnect the power cord from the router and the modem. 2. Wait 10 seconds and reconnect the power cord to the modem. Make sure it has power. 3. Wait until the modem’s online indicator has stopped blinking (about two minutes). Reconnect the power cord to the router. 4. Wait until the white Power and Internet lights on the front of the router are solid. This takes about two minutes. Then, connect to the internet from a computer.
Specifications Belkin RT3200 Model Name AX3200 Dual-Band Gigabit WiFi 6 Router Model Number RT3200 Switch Port Speed 10/100/1000Mbps (Gigabit Ethernet) Radio Frequency 2.4 GHz and 5 GHz # of Antennas 4 Ports Ethernet (1-4), Internet, Power, USB 2.
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: http://www.belkin.com/support/license. Please contact http://www.belkin.com/support/gplcodecenter for questions or GPL source code requests. © 2020 Belkin International, Inc. and/or its affiliates. All rights reserved.
Die Line File: Artwork File: REV FDL_MSKU_5 X 5_8 PAGE_AF_LGL 0 00 INS_RT3200_8850-01250_RevA00_AX3200_DUAL-BAND_WiFi6_ROUTER_Regulatory_Warranty_Info Business Unit: NET-Networking DIE LAYOUT Program Manager: Packaging Engineer: Brian Byrd LEGAL - 80 GSM WOOD FREE Retail Outside Dimension (Including Hang Tab) L x W x D (in): 5 x 5 x 5 L x W x D (mm):127.00 x 127.00 x 127.
