User's Manual

Setting up your wireless router

To clone your MAC Address:

1 Make sure that you are using the computer that was ORIGINALLY CONNECTED to your

modem before your router was installed. Click

2 Click Clone, then click Apply Changes. Your MAC address is now cloned to your

router.

To enter a specific MAC Address:

• Type a MAC address in the spaces provided, then click Apply Changes to save the

changes. Your router’s WAN MAC address is changed to the MAC address you specified.

Using the Web-Based Advanced User Interface

Using your Internet browser, you can access your router’s Web-Based Advanced User

Interface. Open your browser and enter 192.168.2.1 (do not type anything else such as

“http://” or “www”), then press Enter. Your router’s home page opens in your browser

window.

Viewing the LAN settings

Clicking the header of the LAN Setup will take you its header page. A quick description of

the functions can be found here. To view the settings or make changes to any of the LAN

settings, click LAN Settings, or to view the list of connected computers, click DHCP client

list.