User's Manual

Setting up your wireless router

Running the Setup Assistant

To run the Setup Assistant:

1 Shut down any programs that are running on your computer at this time.

2 Turn off any firewall or Internet-connection-sharing software on your computer.

3 Insert the included CD into your computer. The Setup Assistant will automatically

appear on your computer's screen within 15 seconds. Click GO to run the Setup

Assistant, then follow the on-screen instructions.

Important: Run the Setup Assistant from the computer that is directly connected to your

router.

Note for Windows users: If the Setup Assistant does not start up automatically, select your

CD drive from My Computer and double-click the file named SetupAssistant to start

the Setup Assistant.

4 When the Confirmation screen opens, verify that you have completed all QIG steps by

checking the box to the right of the arrow, then click Next to continue.