User's Manual

1110
Connecting and Configuring your Router
1110
Connecting and Configuring your Router
Step 1 Run the Easy Install Wizard software
1.1 Shut down any programs that are running on your computer at
this time.
1.2 DO NOT CONNECT THE ROUTER AT THIS TIME. Make sure
you have the following items at the computer that is now directly
connected to the cable or DSL modem.
• Belkin Wired Router
• Quick Installation Guide
• Belkin Easy Install Wizard Software CD
• Belkin RJ45 Networking Cable
• Power Supply
• User Manual
1.3 Turn off any firewall or Internet-connection-sharing software on
your computer.
1.4 Insert the Easy Install Wizard Software CD into your CD-ROM
drive. The Easy Installation Wizard screen will automatically
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from “My Computer” and double-click on the
file named “Setup” on the CD-ROM.
1.5 Follow the Easy Install Wizard to complete the installation.
Easy Install Wizard
Belkin has provided our Easy Install Wizard software to make
installing your Router a simple and easy task. You can use it to
get your Router up and running in minutes. The Easy Install Wizard
requires that your Windows 98SE, Me, 2000, or XP computer be
connected directly to your cable or DSL modem and that the Internet
connection is active and working at the time of installation. If it is
not, you must use the “Alternate Setup Method” section of this User
Manual to configure your Router. If you are using an operating system
other than Windows 98SE, Me, 2000, or XP, Mac OS 9.x, or Mac OS
X, you must set up the Router using the “Alternate Setup Method”
section of this User Manual.
IMPORTANT: Run the Easy Install Wizard from the computer that is
directly connected to the cable or DSL modem. DO NOT CONNECT THE
ROUTER AT THIS TIME.